AIKEMA 32" to 55" TV Display Wall Mount with Cable DVR Satellite Box Holder for Indoor and Outdoor use

Great end result and very happy!!! Directions could be formatted a little better to be streamlined and in an efficient order. For example a particular step in the directions on page 5 says reference page 12. Then the next step on page 5 says reference page 16, etc... I found myslef flipping back and forth through the manual.The back plate of the cablebox holder covers a good portion of the wall and may block your outlet. Fortunately the back plate has circular openings and we were able to measure and hang on the wall at the right height and still access one of the outlet plugs, but you have to be precise with measurements. We used a surge protector to plug in everything else. I think we got a little lucky with where our outlet was located. Otherwise we would have needed to move the outlet.I'm not the handiest and it took 3 hours to install. I went slow. I recommend reading the directions in advance and organizing all the parts before you start. I'm very pleased with the end result and it was well worth the time and money.

This wall mount is terrific for holding/hiding your cable box and wires behind your TV. It was a little challenging to put together but mainly because I'm not very handy. I had to go to the hardware store to buy the correct size drill bit but otherwise, all the parts I needed were included in the package. Definitely follow all of the instructions, including taping an outline of your TV to the wall. I almost skipped this step out of laziness and overconfidence but good thing I did because otherwise I would've attached the mount too low on the wall and the TV would've hung below the top of the mantle (it's still a little low due to poor measuring on my part). One other note, the TV will stick out fairly far from the wall once mounted (mine is about 6 inches off the wall) but you can't tell at all when you step back from the TV.I definitely recommend this product if you're stuck with a cable box and no place to put it.

does not work with 32" Samsung 5500 smart TV; not compatible holes geometry, wrong hardware; should not be advertised for 32" TV - wasting lots of time, huge aggravation, too bad - product made in America can not work, no real support from Innovative Americans - I have not received any answer to my email ( the only way to communicate with IA ) with concerns over this product.

Works perfectly however IMHO the back plate covers too much of the wall. Make sure your electrical outlet and cable/internet jacks are accessible before performing final installation.

Worked excellent with our 50" vizio. Install was easy...take your time...outline your tv with tape, find your two studs in the wall, use a level so its straight. Sticks out several inches from the wall to accommodate your cable boxes and such. I also stuck my modem and router behind there. Nice clean look. Would use again for another tv. NO LEFT OR RIGHT TILT, ONLY UP AND DOWN WHICH IS SECURED WITH BOLTS WHEN THE ANGLE YOU WANT IS ACHIEVED.

Not difficult to install and does support the tv size it claims too. WE have u-verse and can NOT store box in mount behind tv due to box not receiving signal from remote.

This is a great product!! It was a challenge to put the television over the brick fireplace, but this bracket worked out perfectly! The installation went smoothly, and no one would know that the cable box is behind the TV. The customer support was amazing as well. Responses to my e-mail questions were answered almost immediately. I highly recommend this product and this company.

This mount does hold our charter cable box behind our 40" tv. However it was very difficult to install. The installer ended up having to modify it slightly.