Sovol 3D Printer Stainless Steel Funnel Resin Filter Cup w/Cleaning Kit

Well made and easy to use funnel set. Fits perfectly into standard bottle sizes and does not get dirty easily. Included accessories make a big difference too.

It is a good funnel that sits stable in the resin bottle. The filters, one fine and one course, fit snuggly in the funnel. Because the filters are disk shaped, they aren't blocked by the funnel wall like paper filters can become. No more paper filters to buy. No more filters collapsing in on themselves in the funnel. This set is easy to use, easy to clean, works perfectly and is sturdy to last. A great design at a fair price. I recommend it highly.

The Stainless Steel Funnel is a great tool that makes it easy to transfer liquids without making a mess. The stainless steel material is durable and easy to clean, and the strainer filters are easy to install and clean. I have been using it for 3D printer resin, and it works great, I have not had issues with my 3D printer resin after filtering it out with this funnel setup. The only downside is that one of the strainer filters tends to clog easily, but it's not a big deal. Just make sure to be careful not to over fill the funnel. Overall, this is a great product and I highly recommend it to anyone looking for a durable, versatile and easy to use funnel for their Resin transferring needs.

My resin printer came with a handful of paper filters to get particles filtered out of my resin vat by pouring resin through the filter into another vat (or cup or bowl, whatever) and back into the vat. These paper filters were a waste of paper and resin since the paper often absorbed a lot of the resin's wetness, resulting in less resin being recycled. It was also a lot messier using the paper filters. These metal funnels do a much better job funneling the liquid, and the filter inserts do a similar job of filtering particles. However, the filters seem to be too fine to filter some resin liquids quickly enough to make them worth the hassle to me. I mostly leave one of the filters inserted but slightly open to allow the liquid to drain faster. Then, if I feel the liquid is a bit dirty, I'll filter it more or use the tub clean functionality of my printer to harden the bottom of the liquid in the vat, where most particles will fall to. Overall, the value is here. I love the funnel. It makes my resins far less hassle to deal with. I recommend for the funnel alone. However, if you expect a great filtration system, you may find these disappointing. I recommend for most casual users and people who like to put resins back in their bottles. Might also be useful for mixing resins.

I've had this for about a month. It handles every resin I've thrown at it without damaging itself or the resin, and even after a day or two of sitting out, it cleans up with just a quick squirt of 91% rubbing alcohol. I'm not quite sure why; it comes with two strainer screens and different meshes. The normal one works great for me; the finer mesh works just fine, too, but it takes forever, but that's to be expected. This thing is easily worth twice the price. I was fully expecting cheap chinesium. Instead, I got a quality product that far exceeded my expectations.

I like this funnel! My old resin printer funnel was a collapsible silicone one that didn't open very wide. This one is rigid and comes with a screen that can be removed and washed so that the holes don't plug up. Much less chance of missing too when you're dumping out the resin tray. Give it a go!

Get this one, do not use paper filters. Works great and is infinitely reusable. just wipe with a paper towel then clean in the "dirty" IPA just like your parts. Always have a 2 stage IPA cleaning process ("dirty" and "clean") when the "clean" becomes opaque, I pour it into the "dirty" bucket The "clean" bucket gets virgin IPA. The "dirty" IPA is distilled (70% recovery) into "virgin" IPA I use air pressure to blow out resin from all the crevices of the part, otherwise the cleaning takes forever. Dunk into IPA, shake, blow air pressure... repeat Do this in the garden, or the resin is all over the place

Good quality exactly what I was looking for and I hope to use it for along time.

great item

Ideal para la impresión en resina. Con los coladores era bastante pringoso el pasar el resto de la resina de la cubeta a la botella otra vez. con este embudo es una maravilla. Luego se limpia con un poco de alcohol isopropílico y queda nuevo

Works, 2 included filters are handy

Nach mehreren Anwendungen bin ich mit dem Sovol Resin Filter inklusive Edelstahltrichter sehr zufrieden. Gerade beim Zurückfüllen von Resin in die Flasche erleichtert das Set die Arbeit deutlich. Positiv: Hochwertiger Edelstahltrichter – stabil und leicht zu reinigen. Der Filter hält zuverlässig kleine Harzreste und ausgehärtete Partikel zurück. Sauberes Umfüllen ohne Kleckern oder Verschütten. Gute Passform auf handelsüblichen Resinflaschen. Wiederverwendbar und dadurch deutlich nachhaltiger als Einwegfilter. Ideal für SLA-, DLP- und LCD-3D-Drucker. Nach der Reinigung sieht der Trichter wieder fast wie neu aus. Kleine Kritikpunkte: Der Filter arbeitet etwas langsamer als Papierfilter, da das Resin besonders fein gefiltert wird. Dafür ist das Ergebnis deutlich sauberer. Nach dem Gebrauch sollte der Filter zeitnah gereinigt werden, damit kein Harz eintrocknet. Das ist bei wiederverwendbaren Filtern jedoch völlig normal. Fazit: Für jeden, der regelmäßig mit Resin druckt, ist dieses Set eine sinnvolle Anschaffung. Die Verarbeitung ist hochwertig, das Umfüllen gelingt sauber und der wiederverwendbare Filter spart auf Dauer Geld und Abfall. Das Preis-Leistungs-Verhältnis stimmt – ich würde das Set jederzeit wieder kaufen und kann es klar empfehlen.

Ottimo prodotto. 2 filtri e attrezzi per la pulizia. Materiale in acciaio, tutto come in descrizione. Anche il prezzo mi sembra giusto. Spedizione veloce come sempre.