uxcell 16.36sqft Car Sound Deadening Mat Noise Insulation Dampening 315mil

Used this for a roof under a headliner when I recovered it. The stuff sticks like you won't believe. It seemed to help the noise for sure and the temp. It does stretch a bit if you need to go over things. It is easy to cut. You really can put it anywhere.

The adhesive is impressively tacky. If yours isn’t staying stuck then you didn’t do a decent job cleaning the panel surface beforehand. And you DID use a brayer, right? This is good stuff; don’t malign it if you’ve been sloppy. In spite of all the nonsense in the above description (WTF cotton???), this is just neoprene foam that you can stick on big panels to absorb a little bit of noise. It isn’t a miracle product and it can tear but it sticks like mad and you can NOT reposition it after a few seconds. Stick it everywhere. Don’t try for 100 percent coverage. Use it in your car doors to make your speakers sound better. Don’t use it to dampen panel resonance (that’s for heavy thin tarry butyl sheets) but do use this to quiet down spaces. I’m buying more.

I have a Jeep wrangler that I recently put a new exhaust on which caused the exhaust sound to increase. Jeeps are not exactly quiet; however, the new exhaust system made it hard to have a conversation inside at highway speeds. Also, the exhaust used a larger pipe (which runs under the left side floorboards) and there was more heat on the floorboards. I tried using a thicker carpet insulation which helped the heat issue, but not the sound issue. I installed the foil backed pad on the left front and rear floorboards as I needed more heat protection there and the non-foil backed pad on the right front and rear floorboards. Both types were relatively the same amount of difficulty for installing, but the non-foil backed pad conforms to the floorboard contours much better. The non-foil back pad is also easier to tear and damage (during install and during use). It seems like both pads do an OK job of reducing the heat, but I was more interested in lowering the noise level. I did notice a small amount of noise reduction on the highway, but not really significant. If you are expecting good noise reduction, this will not be what you want. I may try adding some different noise pads on top of this one to see if that helps. I will also put some in cargo flooring to see if that helps. The jeep also has a removable top which is fairly thin. I was hoping that I could use the non-foil pad on that too for insulation, however, it is way too fragile for this application, so I will keep looking for something for the top. I should mention that other folks said that this material arrive folded which made it a little challenging. Mine also arrived folded which was annoying, but I made it work. Others also mentioned that once this is stuck on something, it won't come unstuck. I had the same experience as well. If this stuff is mis-stuck, you are out of luck with removing it and re-sticking it. I cut mine to shape prior to removing the backing. Then removed a little of the backing at one time, stuck it in place, then removed a little more. This worked fine for me. Pros: - Affordable - Relatively easy to install - Sticks well - Seems to cut down the heat - Non-foil version conforms to contours Cons - Doesn't really cut down the noise much - The non-foil pad is fragile. Not sure how long it will last. - Tough to remove once stuck down

Worked better than expected. Sticky side is really sticky so make sure where you put it is where you want it. You can't really remove once stuck because it tears apart. Was more difficult than I thought it would be to cut. It has some elasticity to it so you can from and mold over curves and edges. Looks great on my 1991 Camaro Z28 with custom hood louvers. Overall, love it!

Product came folded in a small bag. Laid out over night so it would lay flat for the install. Wouldn't lay flat has little memory. Creases would not come out and it kept trying to fold during install. Paper backing rips, will not come off with out tearing. Poor quality paper After installing I leaned on it and the foam ripped off the adhesive. I will not recommend this product to use. I guess we'll find out if it holds up. I should have returned it and used Butyl sound deadening instead.

This stuff is good for the money but only if you are willing to put up with a couple things. It really does great noise reduction but it is not properly packed and shipped and it really makes it just OK where it could be great. It comes folded instead of rolled and has a lot of creases. This causes the backing paper to come off while it is sitting around or shipping and messes up the adhesive which is just OK. I've used many of these products and this is by far the cheapest but I had to use some spray adhesive in a few spots because the adhesive was just gone on the foam. Also it will never un-crease from the folding, I tried sun, hair dryer, letting is sit for a week, so it will never look very good even for black foam. So if it is going somewhere your don't need perfect adhesion and you never have to look at it, it's a good deal.

Got this to put padding and sound absorption in my trolling motor battery compartment on my boat. Does the job, great adhesion and definitely helps deaden the sound

Great product

Ce produit est top ! Il se découpe facilement, adhère très bien et remplit bien sa fonction d’isolation. Je le recommande.

Took a while to arrive but it does what it's supposed to do.

Excelente protector de calor para poner bajo el capot de cualquier coche. Como aislante acustico pues no he notado mejoria, tal vez porque es de 6mm, y tendria que ser mas gordo. Encuanto al calor, por mucho rato que este encendido el coche, el capot por encima esta totalmente frio. Trae un pegamento fuertisimo que solo da una oportunidad, como se pegue ya no se despega sin romper.

Je l'utilise pour remplacer le joint d'étanchéité de mon échangeur d'air depuis maintenant 1 an et c'est EXCELLENT! Beau produit aux multiples utilisations qui se travaille bien.

Excellent price (Cdn $) and did the job of soundproofing the rear of my hatchback. Received well packaged and in good time. Product was exactly as advertised. Ray W