LukLoy Full Set Hands-Free Foot Pedal Faucet, Valve+Outlet+1m Flexible Hose+Screw, Hospital Medical Laboratory Touchless Floor Mount Control Faucet

I needed this for an outdoor gravity fed sink. The first thing I noticed was it came with a 1/2 hose, inlet and outlet. That is much better compared to the normal 3/8 sink hose and outlets. This is important for my applicatiom as it allowed me to hook up a 3/4 standard hose to the rain barrel (needed an 3/4 to 1/2 adapter from the Orange store). The benefit here is that the bigger hose resulted in greater pressure and enhanced the downward water flow.One step on the foot pedal and BAMMM water flowing like the Mississippi! Of course when you remove your foot it stops. But now I have a hands free way to handle outdoor tasks. Great little unit and it felt solidly built.

I saw one of these at my neighbors house and had to get one. Foot operation works great, ideal for a shop sink. I combined it with a conventional faucet. This unit tees off the cold supply. Made a base out of waterproof pvc trim board to mount the foot petal.

On the positive, the packaging of the valves was impressive, it showed the manufacturer or merchant really cared about their product. The finish on the valves are beautiful and they have a hefty feel that makes you think they'll last a good long time provided no one kicks the foot pedals sideways. So why the poor rating you ask? Well I had high hopes for these foot valves (bought 3 valves and 2 valve & faucet sets) as they were all advertised as having NPT threaded ports (a standard in the US), but alas they are NOT NPT, they are parallel thread (likely G1/2"), so unusable without adding an adapter (another potential point of failure or leak down the road). This makes them just pretty paperweights, and I don't need pretty paperweights.For those in the US that didn't notice because both standards use 14 tpi thread pitch so they just wound 20 wraps of pipe tape to make them seal, well in time you'll have a nice leak at the connections. G1/2" threads have a major diameter of 0.810" whereas 1/2" NPT threaded pipe has a major thread diameter of 0.836" with a 1:16 taper, so by about thread number 5 or 6 the thread diameter is near 0.804 and these two dissimilar standards will engage but only for 1 thread, cause that's all you have. G1/2" connections rely on a face seal whereas NPT rely on the tapered threads and sealant to make a tight leak proof connection.For all the care and effort that went into making and packaging these they fail spectacularly if the threads are wrong. Please fix the posting - these are not NPT.So these are going back to Amazon.

I bought this for my buddy's automoto facility. It worked really well and was very straightforward. Seems like a pretty sturdy construction, so hopefully it'll last

Love this, works as expected

This does not work if not using with full water pressureand/or electricity.. Bought this as a post Helene prep addition to our home. Instructions are not super clear for someone thats never installed a faucet before( which in have done before and was still confused by the terminology in the instructions.... ). Faucet works wonderfully with a Rubber foot pump. The Faucet drill hole size is 1/2 in but 1 in is still workable. Went to Ace and Ebay for the other bits. Every thing arrivedwrapped and in excellent condition. I think I just want the faucet next time though. I know I'll probably need another 2 or so.

Used this on an out door sink. Worked great.

very nice sturdy used it outdoors on my bbq island sink so now no gunky, corroding faucet but hands free.Highly reccomend. No gradual low to high control just on and off smooth control.