Bikes Aluminum Bike Rack - Heavy-Duty, Extra-Large Rear Bike Rack for Fat Tire Bikes - 40lbs Maximum Capacity, Lightweight 6061 Aluminum Alloy Frame - Easy to Install on Rambo Electric Bikes

Based on the pictures of this item I decided to take a chance and order it to see if it might fit my Motobecane Night Train. The mount points appeared to be in similar locations to my fat tire bike but wasn't sure if it was going to work.The item arrived and it appears to be a heavy duty tubular aluminum rack. It comes with the mounting hardware, but the screws were 6mm. The braze ons on my frame are the typical M5 variety(think water bottle cage type) so I had to go find some M5 stainless screws in 20mm length for the bottom attachment point. The top I used M5 16mm stainless screws. The frame on the Motobecane must be wider than the Rambo, but with some pulling and pushing I was able to widen out the bottom legs to go over the braze ons and get it to attach. The top attachment points connect to a rail with 5 mount holes so you can adjust it a little bit, but not quite as convenient as the type that can be slid into place and tightened. I suspect the reason they didn't use that type is due to this rack being used to tow Rambo trailers of various types so they probably wanted a solid attachment that is more or less permanent. It does come with 2 lengths of top attachment arms so you can choose the one that more closely matches what you need.Considering this was not made for my bike it looks pretty good, feels very solid. If you are looking for a fat tire bike rack and you don't have some of the more common attachment points on your frame then this one might be an option. Even if you don't have the lower braze on's in the location this rack connects to you could use a clamp around the frame and attach to that as well. My bike does not have some of the more common mount point locations on the frame so I was looking for something that might work. This rack just happened to work for my bike. Overall pretty happy so far. Just got it installed and hoping to take it out for a spin soon.

Why did you pick this product vs others?:wide rack and is longer than most I have looked at. rack seams sturdy and I like the looks of it compared to others. I had to add my own bottom mounting brackets.

Excellent rack that will fit on a rad Rover 6+. It is necessary to buy four 10/32 machine screws to install it but besides that it works just fine.

I really like this rear rack. It was not made for my bike (Gravity Monster), so I had to make bottom brackets to make it work. The quality of the rack seems to be very good, I believe it is rated for 40 pounds, I put 100 pounds of weight on it and it held it well, I then sat on it (200#) and nothing moved, bent etc.

This took me about ten minutes to install on my 2012 Salsa Mukluk. It's a little heavier and more substantial than I really wanted but there are worse problems to have.

Quality

Fits rad rover!!

Would not fit on my Sondors Fat tire bike. It does however look like a quality rack. I will return. I just want to help the next guy with a Sondors looking for a rack. I’m going to try the Ibera rack.

The width & length fit in my 9zero7, thanks Seller