Top Knobs TK500BSN Mercer Collection 1-1/4" Europa Tab Pull, Brushed Satin Nickel

I just received 4 of these brushed nickel finger pull cabinet hardware, and I’m thrilled with their quality! They’re very heavy, solid pulls with a beautiful sleek design & flawless finish. Although they match the dimensions exactly, they project slightly further than I envisioned based on other reviews. The metal is thick, so there will be a very slight protrusion between the cabinet & door. You’ll also need ~5mm clearance between doors if you want to install them side by side (or back to back?). I was looking for pulls for a 4-door cabinet (2 on top & 2 on the bottom). These will not fit in the vertical center of the doors (unless I adjusted the doors to leave a ~5mm gap in the center). I have a little more wiggle room at the top of the lower doors/bottom of the upper doors so it looks like they’ll work there. I’m just really surprised/impressed with the quality & wish I had found these before installing other hardware on some of my other cabinets. These will be my go-tos next time for sure!

I used these in a Master bath remodel, and plan to use them for my next bathroom remodel project, as well. They are minimalist and sleek for a modern style in a bathroom or kitchen.

I really like the look of these pulls. They look great on my modern built-in entertainment center. I took of a star because the screws are cheap and a couple of the heads broke off. One broke off in the middle just inside the wood which is a real problem. How can it be removed so the pull can be reinstalled in the same place. Do yourself a favor. Purchase good screws, drill pilot holes, and don't use a drill for the last couple of turns.

I bought this to add a pull to a side cabinet that the original pulls on the doors were below my knees, so I added these at the top. They work awesome for this because you can't see them and they don't detract from the look of this side cabinet. Now, I did read the reviews and get the better screws from the hardware store. Here's what the other reviewer wrote "Go to the hardware store and buy #8 x 1/2 inch wood screws with Phillips head. After marking holes use a 3/32 drill bit and drill a 1/4 inch deep hole for screws. With new screws you will be much happier with the installation." Twelve of these screws cost about a $1. Ask someone at the hardware store to help you find them if you aren't familiar with what this means. So they wouldn't be visible, I colored the top of the different screws with a black permanent marker so they really disappeared.

We got this to put on top of a thin spice drawer door next to the dishwasher. Since the door/drawer front was flat and didn't have the recessed panel or design of the rest of the cabinets and drawers I thought the handles and pulls we used elsewhere in the kitchen didn't look right. It took me a while to figure out what to call what I was looking for and to find this. This is not too noticeable really but looks nice with all the stainless appliances and our other silver knobs and handles, installs with two quick and easy screws and doesn't rub or damage anything above it (although our granite is on top of it, it's flat enough that it shouldn't cause any issues. I ordered two different sizes/widths and we ended up using this smaller one but I kept the other one too for possible future use because it looks so nice.

I bought one and liked it so bought the 2 more I needed for my little cabinets that didn’t come with a handle. They match my current handles perfectly (see pics). They seem very sturdy. The screws and handles are wrapped separately (see pics)so there are no scratches when received. The screws match the color and are flat so when installed are flush with the handles. My cabinets were a little shorter than the screws so I just cut them a bit shorter with a bolt cutter and with they worked fine when I screwed into predrilled smaller holes. Very happy with my purchace!

I built a cabinet to match existing furniture, but the existing furniture did not have pulls or handles at all. These pulls are mounted to the upper edge of the doors that I built and are much less visible than any sort of pull or knob mounted to the face of the doors. They provided a clean, unobtrusive solution. Note that these are a bit pricey for what little they are, but they did work.

We were looking for a handle for our new built in spice rack. Other manufacturers wanted aroundWe were looking for a handle for our new built in spice rack. Other manufacturers wanted around $20 which was way to expensive. We viewed what amazon had to offer and found a very reasonable one for $5. Not only a great buy but worked perfectly for the spice rack.