M.2 Heatsink Cooler 2280 SSD Double-Sided Heat Sink with Thermal Silicone pad for PS5/PC PCIE NVME M2 SSD(Black）)

My 2nd M.2 sits right below my GPU so I was worried. 6 months later it is working perfectly. Keeps cool, easy to install, fits snuggly in place. Overall great design

Fits perfectly on my Asus motherboard. Dropped my average temp on one SSD sensor by 10°C and 15°C on the other SSD sensor. Great price, great fit, easy install, does it's job.

Just got a PS5 Pro and had an old Saming 990 2TB M.2 drive laying around. It didn't a heatsink, though. This worked perfectly. Easy to put on the Samsung drive and it all fit without issue into the PS5 Pro (which will be the same for any PS5 console version).

on a WD black SSD, brought down the ASIC controller temperature by 15 deg C. even came with extra screws and a screwdriver, would buy this again if i get another SSD that ran hot

I had an a motherboard that included it's own m.2 cooler on it. So I removed the heat sink that originally came on it. Later when I went to move to the ssd to another system I needed a heatsink cooler. This one has done its job well. It has a top piece and bottom piece. I was worried the bottom piece would be too think for my motherboard, but it is pretty thin. This allows me to use this ssd without it over heating and disabling the ssd. It looks like it will work on most standard sized m.2. The downer is that putting it on your ssd is a bit awkward. One has to attach adhesive thermal pads to both sides and seat that correctly in the housing. They make it easy to line up, but its still a little akward. It has served well so far dissipating the heat.

This is a good quality, M.2 2280 SSD double-sided heatsink for the price. Unfortunately I purchased it for my laptop and I couldn’t use it because my laptop has two brackets on either side of the space where the M.2 2280 SSD goes, making it impossible for any heatsink that increases the width of the 2280 (see the pic). So check your M.2 slot on your PC or laptop and make sure the SSD will be able to fit being enclosed in a double-sided heatsink. I did, but didn’t notice the brackets until I put the SAD in the heatsink enclosure.

No problems and easy to put on.

This is a passive heat-sink so don't expect massive temperature drops, but it does help keep your NVME cooler. It fits well on my ASUS mobo and cools better than the ASUS stock heat-sink. I just wish they supplied the spacer and screw that secures it to the MOBO, but it doesn't seem like any of the aftermarket heat-sinks do.

Great affordable nvme cooler. Fits perfect and keeps temps down! Recommended.

Got it for the m.2 i was putting in my ps5. It fit perfect. Easy to install.

The heat sink keeps the NVME SSD cool. Without it the NVME would go up to 45°C+ but with it, it hasn't gone above 36C. In the included piture the temperatures are Current (33°C)/Minimum(29°C)/Maximum(36°C).

If your PS5 SSD is thermal throttling or crashing during gameplay then you need this. It fits perfectly however the spacer shouldn't be installed underneath as this will cause the drive to sit at an angle. Instead, just install the drive and then place the spacer between the screw and the SSD to prevent the screw from being drilled in too far. This set costs just a few dollars more than ordering one directly from china and was delivered within 3 days.

Works way better than expected! I'm using it for a WD SN770 NVME. My temps went from 80c-85c while gaming using the stock heatsink on my MSI b-660m-a motherboard to around 60-67c highest I've seen was while gaming. So a 15-20c drop in temperature. Easy to install Looks great And best of all it's cheap