HDMI 2.0 Splitter, CSRET 1x2 HDMI Splitter Switch Amplifier Ver 2.0 Certified for 4k x 2K (30Hz) & 3D 1080P Support 1 in 2 Out Signal Distributor

This product WILL NOT WORK with the PS4 Pro at 4K60Hz only at 1080p. I purchased this splitter specifically for it's "ability" to split a 4K60Hz signal, unfortunately once I opened the box the instructions said it can only accept a 4K60Hz YUV420 12bit signal. The Playstation 4 Pro is capable of broadcasting a 4K60Hz YUV420 12bit signal by changing the resolution to 2160p, RGB Range to Limited and Deep Color Output to Automatic, However, this splitter DOES NOT accept this signal. I have tried every signal combination and hdcp 1.4/2.2 setting including everything set to Automatic and the only signal that works from my PS4 Pro is a 1080p signal. If you are looking to use your PS4 Pro at 4K60Hz this splitter WILL NOT WORK. If you are looking to use this splitter for 1080p60 get the Aocome 4K30Hz HDMI 1.4 splitter (it's only $20 at most). I have the Aocome splitter and it has worked absolutely flawlessly for recording with my Elgato HD60 Pro at 1080p60Hz with no input lag. I purchased this CSRET splitter to "upgrade" my Aocome splitter but the CSRET is a glorified paperweight at anything but 1080p or 4K30Hz which my Aocome already supported. I give this HDMI splitter 1 star due to the fact that it does not do what it is advertised to do (split an HDMI 2.0 4K60Hz signal).

I received this and you could tell from the very start this was well made. I have another splitter but it is plastic (CSRET is metal) and I have a 4K TV and a regular 1080p TV. First you need cables, if you do not get 2.0 cables you will not get the right signal to your 4K TV. You need short 3' 2.0 cable sold here a Amazon to go to splitter box, then you need 2.0 cable (sold here at Amazon-different lengths) to go from splitter to 4K TV. You can use 1.4 or 1.3 or whatever going to regular 1080p TV.I have 4K TV in living Room and 1080p TV in bedroom. It will not send correct signal to both TV's if both are plugged in, it will send lowest resolutionto both, so one cable has to be unplugged if you want true 4K going to 4K TV. Example at night before I retire to bedroom where 1080p TV is I plug that cable in, it does not matter if cable from 4K TV is plugged in or not. To shorten this up, if you want True 4K image (Mine is from PC) on your 4K TV you must unplug 1080p cable, press power button on splitter box OFF then back ON, sounds like a hassle but it's not, when you see picture it's great. Some people say 4K is overrated, I do not believe that to be the case, the difference to me is as great as going from SD to HD, yes that big. Again none of this will work right unless you get 2.0 cables, 1 to splitter, 1 to 4K TV.

It did the trick, but my complaint about it was that you have to have it plugged into power and powered on for any use. I had hoped the power would just be needed if I wanted to have it extend to the second HDMI output (for my projector) and that unpowered it would simply pass the signal through to the default port 1.But it won't do that, you have to have it powered all the time. I will keep looking for something that only needs to be powered or switched when I actually need to use the second HDMI output.

No picture came through purchased a different one that works great

amazing product. it arrived on time, and had no problems. they gave very good instructions about the setup in an email, before the product arrived. A++++ rating.

Works exactly as expected. Their support is amazing as well. I already got their other splitters but this one is required for HDMI 2.0 in 4K.

I asked the tech friend who helps me by testing products of this nature to check this out. This is his report:“I have little to say about this product since its function is very basic. But I have to say that the color tone in the output video is very good, better than some splitters I’ve tried.. Also the audio quality is very good and it has a very strong volume, compared to others.“It works very well for Karaoke parties where devices like this are very often used in the Dominican Republic.“Very good product quality!“A very minimum current consumption of 600mA.”The reference to the Dominican Republic is because I am an American expat and my tech friend is Dominican.

Works great. Easily plug in 3 different electronics. I used with a xbox one fire stick and cable box. Very convenient