🔨 Bond Beyond Limits with ClearWeld!
The J-B Weld 50112 ClearWeld Quick-Setting Epoxy Syringe is a powerful, multipurpose adhesive that sets in just 5 minutes and cures in 1 hour. With a tensile strength of 4400 PSI, it creates a permanent bond on a variety of surfaces, making it ideal for both indoor and outdoor projects.
L**S
!!!
Worked for the projects we needed it for. Easy to use and convenient to save for future use
R**T
Great product, the screw down closure cap is top rate
Excellent epoxy, easy mix, crystal clear, superior adhesive for plastic (in my case).The problem with most of these dual tube epoxy products is that the end cap does not fit tight and the epoxy quickly goes bad. JB Weld uses a screw down cap that avoids this issue. Simple fix, great product - the only tube epoxy I will purchase from now on.
O**Y
Fixed a hairline crack in my toilet tank
I noticed a small puddle on the floor by the toilet so I took the tank off and replaced the old gasket and the dried out rubber washers on the two bolts. I put it back together and filled the tank and flushed and it still leaked.I took it apart and looked closer and saw some very fine dark lines radiating out from one of the bolt holes. The toilet is probably twenty years old and might have had some vibration that cracked it.I bought this stuff and wiped the inside of the tank then waited for the inside of the tank to dry.It has a plunger with two tubes separating the two components and a nice resealable cap. I put on a pair disposable gloves and put a bead of glue on the bottom of the tank. I used my fingers to mix the glue and spread it around the bottom of the tank. I used almost all the glue.I let it dry over night to make sure it had set. Then I put the tank back on and filled the tank and flushed. No leak.Great product and it saved me from having to buy a new toilet.
M**A
Just bought three more
After buying a one-pack, I just get a three-pack. This stuff is great. From mounting electronic projects to fixing broken ceramic figurines, this stuff rocks. As others mentioned, it does give off a strong odor until set. What I do is set up in the bathroom, close the door and turn on the exhaust fan. Glue what needs to be done, then leave keeping the door closed with the fan on for an hour or two. After that, the odor is gone and the glue is fully set.
A**E
Love these
Easy to use epoxy mix. No guessing on how much to squeeze. No more messing with 2 tubes. Must have for around the house quick fix.
Trustpilot
5 days ago
1 week ago