TOGGLER SNAPTOGGLE BB Toggle Anchor with Bolts, 1/4-20 UNC, 10 Pack

actually incredible. I have a 65 inch Oled, mounted to a swivel full motion mount. with 4 of these toggles through sheet rock only and one stud, it is rock steady

After researching how to install a grab bar in my rental's fiberglass shower enclosure, I decided to use these TOGGLER anchors and I made the right decision. The enclosure didn't have studs behind the walls, which ruled out traditional mounting, but these toggles worked perfectly. The key thing to know: they're extremely strong when installed correctly. I've seen reviews from people saying they don't pull tight enough, but that's simply a matter of installation technique. Once you screw on the bolt completely tight, the toggle wings fully expand behind the wall and create a rock-solid hold. You just need to tighten it all the way—don't stop partway. In my case, the grab bar is strongly secured with zero wiggle, which gives me full confidence. For anyone installing safety fixtures in hollow fiberglass or drywall walls without studs, these are an excellent choice. Just take your time, follow the instructions, and make sure to tighten those bolts all the way. Highly recommended for hollow-wall grab bar installations.

Fantastic. I needed to mount a light 32" on wall with an articulating mount (total weight about 25 lbs), but only had one stud on one side to grab on to. So I used two of these anchors on the other side through drywall. I have never used these before. Just wow. This TV is not going anywhere! I was a little skittish pulling out my 1/2" drill bit, but it worked like a charm. Install took all of 15 seconds, it was that easy. Way better than the traditional screw toggles. I am impressed. Not sure I would mount something really heavy with these anchors, as drywall is obviously pretty weak. But for my application my TV install went perfectly. Highly recommend as long you know the limits. Nice product and so easy.

Very useful especially since the usual plastic ones tend to break, bend, or fall into the wall. The only issue with these is sometimes the plastic bit gets compromised and it does fall into the wall. This happened a bit too much, so I contacted the company, and they sent me over a whole replacement box. Their willingness to replace my order was helpful, even though it was annoying that it sometimes took a couple times to get the thing mounted correctly. They do provide a very strong hold without a stud in drywall. I would caution that it takes patience and care when using these, and hopefully you won't have them fall into the wall. Because when they do work, they do a great job. At least the company is willing to replace them!

These things are awesome

These are extremely strong and the most versatile wall anchor that I have found. They work in 3/8" drywall, but will also work in depths of up to 3 5/8". It also requires a slightly smaller hole than standard toggle bolts. My house has plaster wall of various thickness. Some areas used a plaster board with metal lath and plaster on top, making for very thick, uneven and brittle walls. Standard nylon drywall anchors will not work. The wall chips out too much. Toggle bolts may need to be so long to get through the drywall, that the bolt itself won't fit in the wall cavity. Of course, with standard toggle bolts, you lose the toggle the first time you take the bolt out. With snaptoggles, you drill the hole, insert the toggle, pull it tight, and then insert the bolt, so their is not an issue with bolt length that you have when you have to have the bolt in when you insert the toggle with a standard toggle. I do recommend that you buy some 1/4" fender washers to use with these when working with materials that might not have a clean hole when you drill. That just insures that your toggle won't pull back through the hole. These things do have a downside, which I have come to terms with. Some of the toggles will break during installation. It is not a big deal. You can just use another one in the same hole. Still, it makes an already expensive anchor more expensive when you waste some. In my twenty pack, I broke 7. Part of that is because of my stupidity. The nylon zip part of this anchor does not provide any of the strength of this anchor. The strength is all on the metal toggle and the bolt. You do not need to pull that nylon zip super tight. Since I learned that, I am not breaking too many. Still, you may break some. One example of the pluses (mostly) and minuses of this product was when I tried to anchor my toilet recently. The flange bolts on one side were not holding. When I went to replace the bolt, I found that the flange opening for the bolt had widened out over time, so the flange bolts would never hold. I thought I was going to have to pull the toilet, and either replace the flange or repair it, then clean out the old wax ring, install a new one and remount the toilet. Instead, I used a snaptoggle. The first one broke, I think because the flange was not flat underneath, resulting in an awkward angle to thread the bolt in. The second snaptoggle worked like a charm. I finished in five minutes (ok maybe fifteen). Now my toilet does not wobble, and I did not have to go through the time, expense and mess of messing with the flange, wax ring and pulling and remounting a toilet. I'm fine with spending $2 or $3 in snaptoggles to get that done.

I bought 3 types of screws and chose this among them all and it was the best choice. I have drywall in my restroom and needed to put on a towel hanger and this was perfect. It is the most modern system for drywall. It’s very sturdy and have a good capacity, I could hand even bath towels and rugs as well.

When they work, they work well. I believe I got a bad batch. 5 out of the 10 in a box broke while pushing them through the hole. The metal piece kept breaking off the plastic before you could put a screw through them to hold them in place. Wish they were made a little better. Due to them breaking, installation of 5 took a lot longer than what it should have and started becoming frustrating.

These are amazing! We used them to mount a barn door. They certainly can hold a lot of weight.

Works great for securing my TV to my drywall without any studs lining up in the right spot.

Bon produit, correspond à la description, rien a dire de très bonne manufacture.

Watched a bunch of YouTube vids, chuffed I managed to get this on prime! Worked a treat - needed to buy a 12mm drill bit but it held my tv mount to the plasterboard wall no problems! I even did a pull up on the tv mount!

Good product, used it mount my 65 in TV