Tie Down Brackets: Truck Tie Down Brackets plates, secures and holds the things on the inside of your truck bed tightly for additional cargo tie down points. Easy to install, just put it to the right positions of your truck bed(4 positions to install them), use screws twist to tighten the 4 holes. It can be used with the locking tie down cleat, tie down hooks strap, etc together. Boxlink Tie Down Anchors: 1. Makes F-150 more productive with available ramps and universal attachments that can be configured in dozens of ways; 2. Reinforced box sides in 4 places to better support tools and accessories; 3. Enables attachment of aftermarket items such as a bed divider or stow-able loading ramps. How to Install the F-150 F-250 F-350 BoxLink System 1.Find the 4 tie down locations in the bed of the truck. (2 on each side) 2.Take your BoxLink cleat, unlock it, and line it up with the insert. 3.Pull out on the bottom of the cleat, and slide the top insert up into place. 4.Once in the desired position, use the special keys to lock the cleat into place.
| Manufacturer | PFCC |
| Brand | PFCC |
| Item Weight | 6.19 pounds |
| Package Dimensions | 6.54 x 6.06 x 5.35 inches |
| Manufacturer Part Number | OEM-FL3Z-9928408-AB FL3Z-99000A64-B |
J**T
They’re cheap for a reason but they will work with effort
Only one out of the four fit first time. The rest needed trimming and adjusting to fit. The lock mechanism is poor and I can’t see it lasting if it was locked / unlocked regularly. If you expect them to fit without any hassles then I suggest you buy the OEM Ford ones for a lot more money. You get what you pay for with these I’m afraid.
M**K
Easy 15 minute install
I've used the stock tie down points many times and they're solid but difficult to get to if you've got a bed full of stuff. I added these to work around that problem and provide more options. The quality is excellent save for the locks. They seem pretty cheap. Like "flat head screw driver destroy" kind of cheap. But I didn't buy these for the locks. The plates are definitely sturdy and the anchors seem well build and able to hold a ratchet strap or bungee cord with no issue.Installation took about 15 minutes. TOP TIP: LUBE THE BOLTS. These are self tapping bolts. Put a little grease or oil on them and spin them in with a good power drill. I lubed one bolt every other time on each plate and pre-tapped the holes. Then I installed the plate with the first lubed bolt and then 3 fresh bolts. No lube required. If it feels hot, stop! It's about to snap. Grab a different one. They provide more than enough.My kit came with 4 keys but the locks are all keyed alike so that's 3 extra keys.Overall, I'm very happy and can't see spending 2.5 times this on something with fancier packaging.
N**E
Needed a simple modification to fit 2021 F150
These fit the 2021 F150 just fine, with a very simple modification.There are two bumps on the bottom of the locking piece that cause this piece to sit out too far for lock to slide into place. I took a dremmel tool and sanded off the bumps and the lock worked perfectly. It is just plastic, so you could probably use a box cutter to slice them off too. See the before and after pics so you can see what I'm talking about removing.
G**Y
buy from Ford
This is not a ford product and will not work. I just brought a 2021 ford f150 it came with the bracket so I order this product it would not fit in the bracket at all. I had to buy from Ford dealer. So don't waste you time ordering these.
H**L
Decent - Buy a 6mm x 1.0 MM tap also
It is a good set once you get it installed. They provide flat bottom screws so using them as a tap is not easy. They should have provided screws that were tapered and it would have been easier to install. Had to go buy a $5 tap (6mm x 1.0 mm tap) and use an electric drill and grease and then it worked fine.
G**T
Sturdy but Specialty Star Bit not included
Seem sturdy. Im able to hook a strap in these plates without clips. Takes the paint of the hook. But works. Vt-30 speciality torque star bit required bit frustrating that it wasnt included but i can see why. If they did include one they would have a lot of returns because drilling these in i stripped 3 bits and i weigh 270lbs and all my weight was against that screw. Dont use an impact like some say. And Dont cheap out on the bit or you will only get 3 plates before your all out of bits. See where i had to stop in my pictures. 2020 f150
Trustpilot
2 weeks ago
1 week ago