Tub and Shower Repair Kit - White

This worked very well. Easy instructions. Be sure to read them and follow =D There is a strong smell so cover your mouth and nose. Wear gloves. Be sure to have the exhaust fan on and open a window if you can. If you have a floor fan that would be good too The order goes away really fast as the stuff is drying. This is really white so you can see in the photo the difference. Apparently my stall is a tad off white. The photo really picks up the white. Just looking at it with out camera it blends well. I have had it on for a couple weeks and it is holding up so well. I tried to get someone in to just fix the couple spots. Oh my, they want to redo the entire shower stall $9,000 Come on ??? Thank you for having this product Irene

Our bathtub in a brand new build (products aren't the same as they used to be) chipped. This product works really well. A year after install it's still rock hard and isn't flaking off. Be sure to create a square with painters tape to make it look good. Beware- the smell is very strong. Would highly reccomended.

It does what it says.

I had a small chip (1/8"w x 3/16"l x 1/16" deep) in the bottom of the shower. After shopping and reading reviews this product appeared to be the best. IMO they should give more instructions for using a smaller amount. 1/2 jar is probably going to be way too much for most repairs. I used an amount equal what I could dip out with the stick. Probably about the size of the end of my little finger. I mixed in 2 drops of hardener. I applied it with a small, flat toothpick which worked very well. Pushed it into the chip and then overfilled it as directed to account for shrinking. After about an hour I checked what I had on the small piece of cardboard and it was fairly well set but still very slightly pliable. I never wanted to sand this so what I did is to take a brand-new razor blade and carefully slice off small slices off the stop until it was flush. It worked out perfectly! No sanding and re-sanding and polishing or any of that. I wanted to avoid sanding because when that is done you are taking away some of the existing gelcoat which seem counterintuitive to me. You have to be careful and hold the razor blade parallel with the surface but IMO this is the best way to do this in my particular situation.

Purchased this to fix a chip in a shower pan. The pan is bright white and this is marketed as bright white, I know there are countless shades of white and this was not bad, but the color difference was noticeable on a small 1.5" x 1/16" chip. So far the product has worked as advertised, sanded well, smell was not bad considering what I've read on the reviews, easy to use, good instructions. The polishing paste amount is minimal and if you are going to use the full amount I suggest you get more paste. Same with the sandpaper. I was surprised and disappointed that inside the shipping box was a label for this product indicating it cost of $16.99, when I paid $39.99. Everything is over inflated in price and I see this is no exception. I Wish Amazon would work more to keep their customers happy with reasonably price items.