2500W antminer PSU power supply 2400W PSU for antminer s9 a3 t9 s7 Mining Power Supply 12v for ASIC Miner GPU s9 wahtsminerDescriptions:Fit For: S9(12.5T/13T/13.5T) S7 Ant Series Mining MachineInput Under-voltage Protection Point: ≤180 V, Input Under-voltage Recovery Point: ≤185 V. Automatic recovery can be achieved. The backlash is not less than 5V.Input Over-current Protection. Over-current point is between 140~160A.Output Short-circuit Protection. Recovery can be achieved after the removal of short circuit.Input Over Temperature Protection. When the temperature switch is higher than 100 degrees, turn off the 12V output. The temperature can be restored automatically below 65 degrees centigrade.Specifications:Color: SilverCable Length: about 39cm / 15.35inConnectors: 6 PIN x 10Number of Interfaces: 10Input CharacteristicVoltage Range: AC176-264VInput Rated Voltage: AC200-240VStarting Inrush Current: ≤80 AMaximum Input Current: ≤10 AEfficiency: ≥92%Output CharacteristicsOutput Rated Voltage: DC12.25VLoad Regulation: ≤±2%Linear Regulation: ≤±1%Rated Output Power: 2500wOutput Current: 0-150AOutput Ripple And Noise: ≤120 mVp-pDrive And Shut Down Overshoot Range: ≤±5%Rise Time: ≤100 ms(230V rated load test)Boot Time: ≤3 S(230V rated voltage test)Hold Up Time: ≥10 mS(230V rated voltage test)Environment ConditionsOperating Temperature: -40~+50℃ Full Load (Typical value is 25 ℃.)Storage Temperature: -40~+85℃ (Typical value is 25 ℃.)Operating Humidity: 5~95% Frost-freeStorage Humidity: 0~95% Frost-freePackage Included:1*2400W Power Supply
Trustpilot
2 months ago
3 weeks ago
