Go Power! Heavy Duty Modified Sine Wave Inverter (3000-watts)

انفيرتر جوباور جدا قوي وتشغيل الاجهزه الكهربائيه اكثر من جهاز ٢٥٠٠ واط ومرتاح ...انصح فيه ولكن تاكد من الكيبلات اتكون قويه

I wish i would have bought this as my first inverter because this is a solid peace of machine. Not as the other fake inverter that i've bought before.This powers my hole RV. My 4 hot plate, 2 servers, 1 laptop, a 40inch tv, a monitor, router, outdoor tracking camera, satelite dish, lights, microwave, toaster and more.I<m planing to get another soon for extra power. If you want a real inverter that works well with sensitve equipement this is the one. Yes it's not pure sine but it's 1000 time better than all thoses junks out there believe me.

I've got one of these hooked up to two 6 volt golf cart batteries wired in series. It runs power tools, charges tool batteries and works great. You can leave it on in standby mode and it draws virtually nothing. It runs small loads silently. When you turn on a big load the fan comes on. I like how this one allows me to hardware it to my application instead of having to use the built in outlets. The remote for it works great. I've been using mine for about 6 months now with no problems at all.Update: I tried to run some older power tools and they kept tripping the breaker. After doing some troubleshooting I discovered that I had used the wrong gauge wire for my connections. I was misguided by Amazon's "People who bought this item also bought..... " Amazon recommends an inverter wiring kit with 4 gauge cables. This inverter calls for 4/0 cable and someone probably confused that with 4AWG and now we all follow like sheep due to the way Amazon links the two products together. 4/0 wire is way bigger than 4. Wire gauges go, in ascending order, 4, 3, 2, 1, 0, 00, 000, and 0000 the latter being 4/0. After rewiring with 4/0 I can now run air compressors and old skill saws. Lesson learned. The Cobra 4 gauge cable kit is way too small for this inverter.Update: It's been two years and one month and now it's dead. Worked great till it died.Update: Ooops it wasn't the inverter that died. It turned out to be a faulty switch. Note to self: check the power to the inverter before you take it all apart. (Luckily it was easy to reassemble). I strongly believe that 98% of people's inverter problems, regardless of make, have to do with the cables and the batteries that feed it and not the inverter itself.

I wanted to hook this up on my Dodge Ram Truck. It has two 12 volt batteries. My plans were to use it to power tools around the farm, and to also feed my sump pump during power outages during the flood season. However when i first hooked it up, the unit kept going over voltage and going into alarm mode. Darn frustrating! The inverter goes over voltage at 15 volts. The voltage regulator on the truck is built into the PCM computer. (ofcourse). Do a search on 'External Voltage Regulators' . There is a website that allows you to bypass your computer voltage regular along with putting in a bypass so that your check engine light doesn't go on, and then you have a voltage regulator that you can manually adjust the voltage that your alternator puts out. I dialed down the voltage to just at 14 volts. Works great, inverter is happy, and now i don't have to keep hitting the reset button on the inverter.2025 Update - I still use this inverter.. Used it a couple weeks ago to do some welding work on the farm. I did make another modification to the truck. I added a toggle switch so i could quickly swap between the trucks OEM voltage regulator, and the regulator i bought for this Inverter. That way, Im only using the custom regulator when I'm using the inverter.

This inverter works reasonably well for most of my power tools, with one exception: it is not capable to power Superwinch 1723 AC 2000 properly when feeding the wire rope down, when the motor works against the brakes. The inverter shuts off. I had to by a pure sine model (GP-SW3000-12) for the winch to work both ways. Note that both GP-3000HD and GP-SW3000-12 provide the same 3000W of power. But my Superwinch will only work with a pure sine model. Now I have two inverters.Only 4 stars because of this, otherwise the inverter is good. For example, I used it to cut logs with electric chain saw recently.

This thing is the bomb, dot com. They say you can't run a computer with it yet I connected my desk top to it and it worked fine. They say it won't work on a guitar amp cuz it will buzz. Tried it. No buzz!! Powered my led 50" t.v. with it. Perfect. Why spend twice as much for a pure sine. I can't figure it out. Did a fair bit of soldering with it. Beauty!! Anyway you cant go wrong with this thing!!!!! Git 'er!!