GS-HT814 4 Port Ata with 4 Fxs Ports and Gigabit NAT Router Voip Phone and Device, Black

My traditional copper home phone line went down last month. So I put in a repair request with Verizon to have it fixed. A few days later, Verizon's response was: "we are no longer repairing our copper lines in your area, you'll need to move to FIOS". Well, I have been planning for this eventuality on and off for about two years now. My plan was that at the point Verizon would no longer repair the copper, I was then going to migrate my phone number to a VOIP service and save the premium Verizon was charging for the traditional copper line. My reasoning being that if I had to move to a service that only remained active for the length of time that the backup battery can power it, I might as well do that myself and save a lot of monthly expense in the process. And so began the search for an ATA to which to bring my in house copper wiring back online, but without the $50/month expense Verizon was charging. I looked at several ATA's (the Cisco and Linksys models as well as this one) and there were two reasons that I went with this model. Reason one, it had four FXS ports (I had four traditional phones connected to the Verizon line) while all of the Cisco/Linksys units were two port units. Reason number two, and the reason that became the final reason why I chose this Grandstream model, was discovering within the documentation for the device a setting to enable pulse dialing support in the ATA. One of the four phones I had connected to Verizon is an old western electric rotary dial pulse phone (the old tanks that simply never die) and so this Grandstream ATA's support for pulse dialing meant I did not also have to spend an additional $50 on a pulse to tone adapter for the old tank. As well, I can confirm that the device does indeed support pulse dial phones, because the old Western Electric pulse dial phone is working with the unit just fine. Everything I found related to the Cisco/Linksys ATA's indicated that they do not, and never have, supported pulse dial, so this fact tipped the scale in favor of the Grandstream unit. The ATA has now been connected to my in house wiring for about a week and a half, and it has performed perfectly up to my expectations. It has always worked when I have made a call, and it has always remained registered with the voip service (Voip.ms in case anyone wants to know) that I had already picked out to use as part of my pre-planning for Verizon's eventual refusal to repair their old copper wiring. Voice sound quality (I'm using the PCMU codec) sounds identical to how voice quality sounded when the phones were connected to Verizon's switch, and I have had zero issues with stutter and/or echo while using the unit to make calls. There is also one extra feature I now have that I did not anticipate. Because the FXS ports on the Grandstream are independent of each other, instead of my internal wiring being "party-line" style (all phones connect to the same phone "signal") I now have four independent "extensions" that can each be making calls at the same time. I can also make calls from one "extension" to another within my home to communicate between rooms via the phones, something I could not do before (this is a feature of Voip.ms's system where one can setup internal "extension" numbers for each phone adapter port to use to make/take calls between them). As for another review of this unit pointing out that the configuration is confusing, I can understand their viewpoint. If one purchases this device with zero background knowledge of VOIP terminology, the configuration of the device may appear a little daunting and confusing. However, this is not so much the fault of the device as it is simply lack of necessary knowledge by the purchaser who is attempting to setup the device. As I had been planning for this move for some time, I had already become familiar with much of the VOIP and SIP terminology and so I found the configuration and setup of the device to be quite straightforward overall. I suspect, however, that any ATA will fall into this issue, there will be some level of assumed knowledge required to understand how to configure and set it up, and the ease with which one finds the setup to be will be determined by how much of that necessary background knowledge one has. All in all, I am very pleased, and this unit is going to well pay for itself in only a few short months, as I have transitioned from paying Verizon $50/month to paying (estimated, as I've not used a full month yet) about $3-$5/month to Voip.ms for VOIP service.

Small business with 4 phone lines and a local phone company jacking up rates. This helped me get rid of my land lines. Works great. Using with VoIP.Ms. I am very happy with my new 4-line phone service and I am saving about $500 a month… seriously!!!

as advertised quick delivery

Beware if you buy this product you will be on your own. I tried several attempts to find some number to call to get some support to set this up with our SIP provider. I have set up several ATAs and most seem pretty straightforward. This one is not that simple. What is more difficult is finding someone to give you technical support. I finally had to open an account with Grandstream to open up a ticket. When I did they sent me a bunch of links that did not pertain to what my issue was. At the end of the reply to my ticket they indicated that they do not provide tech support to the general public. You have to be a CERTIFIED grandstream technician. This company should not be able to sell to the general public if they will not provide support. I unfortunately returned the item.

I use 1-VoIP and they only wanted to provide me with really old hardware. So I bought this Grandstream and am very happy with it. The config is pretty crazy because VoIP itself is complicated but tech support at 1-VoIP quickly walked me through it and had it up and running in no time. My internet is pretty bad (about 20 Mb/s) but this adapter seems to handle it pretty well. The voice quality is much better than with the old adapters that I had.

Liked that it's smaller/more compact and uses less power. Output ports are reversed from old model so can cause connection issues unless you pay attention

I'm a software engineer so take this review with that in mind. My family owns a food business where they take phone call orders. They were paying more than $200 per month to comcast for 3 phone lines plus internet. Using this device in combination with a SIP trunk provider, I got our costs down to $60 for internet and probably less than $20/month for phone usage from the provider. I specifically needed this device to be able to integrate into the Point of Sale (POS) the business used that identified caller id from the phone lines and displayed customer information in the POS. We were also able to keep the same phones as before. The grandstream will easily pay for itself multiple times over in the first year alone.

I am very pleased with it. It works great the quality was excellent, the connectivity is great. It is worth the amount of money I paid for it. It was easy to use. The appearance is very nice. Would recommend this seller. It is very quiet

Value for money

Works great

Plays nicley with a rotatome equipped antique phone but couldn't get the pulse dial to work

contrairement à la photo du produit, celui à bien été livré avec une alimentation EU (pour la france) et non US

Um Mißverständnissen vorzubeugen: Nein, die Grandstream hat keinen S0 Anschluß. Bei mir hängen an der ISDN Eumex aber ohnehin nur Analogtelefone und Fax dran. Davon allerdings 4 Stück bei nur einem TAE Anschluß der Fritzbox 7590 AX. Die Grandstream ist etwas fummelig zu Programmieren, man fühlt sich hier in die 2000 er Jahre zurückversetzt, funktioniert aber über den Browser zuverlässig und es gibt Anleitungen im Internet für die Einstellungen - das sind aber gefühlt 100 Parameter oder mehr. Am langen Ende zählt das Ergebnis und die alten Telefone funktionieren weiter.