Have you tried bearings that fall apart after just a few uses? Or found that you have to sacrifice performance and durability for less expensive bearing brands? Well look no further because more people choose Yellow Jacket Bearings than any other because they are durable, high performing, and most importantly easy on the wallet. Quality Balls designed with premium chrome steel for smooth gliding and optimal performance. Bearing cage is built with high speed nylon for greater strength and less friction. The stainless steel roller cage is injected with high speed race lube so the bearings are ready for use out of the box. Most race bearings are priced extremely high but Yellow Jacket Bearings give you the race performance you want for only a fraction of the cost. These bearings have been tested up against all other big name brands and not only did they last longer but they glided further distances at higher speeds. If you are looking for VALUE look no further than Yellow Jacket Bearings. Yellow Jacket Shield is designed to keep out all dust, rocks, and particles that will slow your bearings down over time. Its patented technology is unmatched and with the Yellow Jacket engraving everyone will know the bearings you are rolling!
P**Z
NO COMPRAR
I am totally disappointed, this product was a total failure, the bearings that I changed for this product, it has 6 years of use and I never had any problem, I bought these bearings only 60 days ago, from the beginning it was noted that they came with problems, however , today they are completely rusty and completely locked, bone does not work at all well! I only used them 3 times and they no longer serve me, I demand a response from the manufacturer and I advise against buying them at all, I will leave a photo of the day that changes them and photos of today, just two months! really a junk and expensive product !.I am going to leave a photo also some photos of my old bearings which are 6 years old and compared to these they seem just bought.
T**A
14 of 16 Bearings worked fine.
If 87% is good enough for you then ignore my review.Of 16 bearings, 2 didn't roll as well as the others...drastically different. One I got to loosen up a bit with extra lubricant. The other one never worked well enough to put in my skates. I had to use the best of the old bearings and throw the "new" bad one away.I gave it 3 stars because you kinda expect all 16 bearings to have been QC-ed somewhere in the process. And you buy 16 in order to replace ALL your bearings with new ones.
R**N
Avid Skater - These Bearings are Bad
I've used a variety of bearings: Bones Super Reds, Flying Eagle Pros, Wicked ABEC9s, and Twincam ILQ9 Pro.These are by a mile the worst bearings I've used out of the lot. Their biggest issue is they squeaked pretty intensely; though they have the speed like many of the above bearings, I cannot recommend them because of their sound. two packs of Bones Super Reds are comparable at 50 bucks. Get Those.
L**�
Not Bad!
Just got the Stripes yesterday and inserted into my skate wheels. Immediately noticed better roll than my 4 year old, rusted out some but clean kwik bearings, (which is what I was going for) just rolling them as I stick them on the skates. I thought maybe they'd roll a little longer, but don't have a good set to compare to. Maybe 3 or 4 out of the 16 had more friction than the others causing for not as long a roll as the rest, but still provided a bit better roll than the old ones.Upon actually skating in them I definitely noticed a difference than my old squeaky bearings, MUCH SMOOTHER! I was thinking I'd be sliding all over with new bearings since my old ones were in such bad shape and holding me back, but not at all, no needing to get used to them. Went with these as I was limited on cash and didn't wanna spend much on bearings. Again I don't have anything good to compare them to but so far so Good! I'll update when I get a better comparison.update:I got a cute set of cheap purple bearings that were supposed to be smoother and they were not. these were much smoother and longer roll than the others, although, I am a deal shopper...
N**E
Abec 9 bearing not happy
I bought a set got them in the mail and they didnt spin very well. I got a hold of the company and the exchanged them for a new set. Put that set in my skates and the first day they werr good not great but good. And every day after that they have gotten worst and worst. I stake roughly 6 miles every night and tonight (day 4 on these bearing) was the worst. They r starting to slow down and rolling harder. An they are starting to make a lot of noise. Not the happest with them
L**I
Good Value, A Bit Loud, My Stocks Are Better
I bought this to replace some bearing that are no longer effective due to wear. I noticed some of my stock bearings spin longer and are quieter than the yellow jacket. The yellow jacket is a good value compared to Reds but I wouldn’t buy again because it is louder and the tolerance may not be as claimed.I owned a Quest 44” Longboard and a Santa Cruz Lion God 40” Drop Thru Longboard.Probably shoulda gone for Super Reds...Edit: Most of the reviews here are for the stingers and not the stripes which is what I was bought using the same reviews on stingers. I wish Yellow Jacker wouldn’t do this by clumping stinger and stripes together because it’s really misleading. This is a bad e-commerce and digital marketing practice that Amazon has allows forever. It’s annoying.
M**E
Can’t go wrong!
I put these on my Suregrip Boardwalk skates (swapping from the stock suregrip bearings) and holy moly, what a difference. I don’t have to work nearly as hard to roll and the wheels actually spin for longer than 2 seconds without stopping. I am able to go a lot faster with these bearings and will be buying these exclusively from now on. They are more affordable and more easily accessible than the highly recommended Reds Bones Bearings. I haven’t tried those so I cannot compare but I really enjoy these stingers. I bought the ABEC 9, and I can’t imagine going much faster but I’m sure the 11s are even better - I may try those if I ever feel like spending a few extra bucks.
S**S
Super fast bearings for roller skates!
Absolutely love these bearings, I paired them with the bones 101A wheels and man do I fly! Highly recommend these! Will definitely purchase again!
J**E
Not all bearing were good
3 out of 16 bearings are not smooth, don't roll as long and make lots of noise when going fast. Your paying for 16 bearing so all 16 should be good. The bearings that did work were about as good as Reds maybe a little louder when going fast though but pretty close equivalent.
F**O
Rodamientos de buena calidad.
Los rodamientos cumplieron mis expectativas ya que son de buena calidad y con muy buen deslizamiento. Me gustaron mucho
G**G
Good bearing so far
I tested them with new wheels on an outside concrete rink and they performed well.
J**E
Exactly What I Needed!
These bearings are a great price and very good quality! I used them in my roller blades and they work perfectly!
D**R
Amazing!
Super fast and smooth, huge upgrade from Stock Abec 5 bearings.
Trustpilot
2 months ago
3 weeks ago