TMO-312C

I've been using this for a while now and it has been great. I haven't been able to run Ethernet so hooking this up was great. It worked right away and is small enough to hide away. Great speed and connection.

Why did it take me soooo long to hear about this!?? Living in a large, brick home that has a FIOS modem & router on one end of it and attempting to use a range extender for streaming at the other end of it was NOT working. At. All. Then the old COAX "cable boxes" get shut down and replaced with wireless devices. Which meant attempting to relocate the modem and router (and crawling under a 30 year old house to drill holes for new wires...NO THANK YOU). My son came home from college & said MoCA was the answer. So I delved into the world of MoCA. 1. The new Verizon Fios routers ARE compatable. There seemed to be alot of yes/no discussion around this. 2. You only need 1 box if your router is compatible. The set up was very simple. Coax line in wall. Box. TV. My son said something about direct connecting to ethernet for gaming speeds (which he uses when home), but that means nothing to me. I now can stream movies/TV with no lag, freezing, buffering or Interruption. Yay! And I know it saved me upwards of $800 by not having to have someone come run new lines throughout my house.

These things work right out of the box. No fussing around with software or setup or special nonsense. Plug each end into your cable feed in some Ethernet and you have a hard line to somewhere. Pricey but worth it!

Worked right out of the box. No configuration or pairing. Simple as it could be. Be sure to use a good quality splitter that works in the MOCA frequency spectrum if you are using this with a cable splitter. Also a good idea to use a terminator cap on any taps that are not used on the splitter.

I have been using an old Actiontec Fios router that I was using as a MOCA bridge that was a pain to set up a decade ago. I've always felt like it could be faster and looked into it and found it couldn't keep up with my current Gig speed internet but put off changing it out in fear the new solution would be another pain and maybe not even work as I expected. I was so wrong. This was super easy to install! I unplugged the old router and attached the Trendnet adapter and it just worked straight out of the box! No IP configs, no bridging, nothing. Plug and play. And it's way smaller! I tested the speeds throughout the day today with the old router and was getting about 151 down / 130 up all day. The new router gave me instant upgrade to 779 down/ 415 up!! Cannot recommend this product enough. Hope it lasts forever!

Unless you have two coaxial systems in your house, this useless product will not work. Customer service was friendly but could not address false advertising. They also kept insisting that I needed to follow the Quick Installation Guide which was a joke as they show internet service coming into the house through the air! This internet signal enters the house by magic. Then you capture that signal somehow and connect it to a router. Once you have achieved this feat, you are all set because now you can connect the router to the adapter and then connect a coaxial cable from the adapter to an unused coaxial port. Now don’t forget that this port is unused because you don’t need it to bring the internet cable into the house because you previously magically got that signal through the air. Using a cable splitter does NOT work. Two Trendset reps finally told me to just connect the two adapters to each other completely bypassing the entire coaxial system in my house!! I got a comcast tech to come and he could not do anything. He said that if one does not have two coaxial systems say one was used for cable and another was used for a satellite dish, then the adapters will not work. Or you pay someone to run another coaxial wire through the walls of your house to connect two rooms. I wasted many hours trying to make this useless adapter work including watching various how to videos. Needless to say I am returning this terrible product including all the various coaxial and Ethernet cables that I had to buy separately as no cables were included in the box! Who needs cables when you can get high speed internet through the air?

I absolutely love these units. If you have a coax port in the room your router is in and that coax line is tee'd/split to other rooms, these units will seamlessly wire those rooms directly to your router. This is very helpful if you a have a room far from your router and you are getting weak wifi reception. I highly recommend for those circumstances.

Simple to set up, I just had to find the cable that runs from the central box to the room I wanted. Tip: disconnect all cables, short out the end in the target room, then use a multimeter to find the shorted cable (then remove the short, of course). This is great for rented spaces with existing coax where you can't run Ethernet (or don't want to).

I was able to get the full 1GB network running on a dark Coax network. Unlike the wallplug I had, which promised a 2.5GB speed ... I was only able to get 450 MB speed.

This works perfectly. Totally saved me the headache of having to run ethernet from my basement to the top floor. For my setup I connected one MoCa to my main router and coax starting point in the basement then connected the other to my coax and mesh router node on the top floor to obtain a wired backhaul. My connection has been rock solid. On the top floor, my wired network speed is at maximum and my wifi speed is near maximum for some devices and at least half maximum for others. This works even better than I expected. I am very satisfied.

Got these as my son’s room didn’t have good WiFi coverage and wasn’t easy to get a CAT5 cable to. It did have an aerial cable so I thought I’d give this a try, and really glad I did. It just worked, I had to re-terminate one of the cables with a better CoAx connector so I had a good stable connection, and once I plugged it in I was getting full speed to our Vodafone fibre internet connection. Had to purchase a couple of US-UK plugs as they come with US power adapters, but no issue with that and the supplied power supplies work for US and UK voltage.

These units are rock solid. I have been using them for over a year without a whiff of an issue. By default they’re generally invisible on your network but you can configure them to obtain an IP address and then even access a web UI for further configuration, firmware updates, and to access statistics. You can fine tune the frequencies they use, configure hashes for security, etc.

Ich nutze die so und so nicht gebrauchten Coax-Fernseh-Leitungen in meinem Haus nun zur Datenübertragung. Das ist viel stabiler und mit deutlich höherer Datenrate möglich, als über Powerline. Was ich nicht wusste: Es wurden leider nur amerikanische Netzteile mitgeliefert, die passen nicht in deutsche Steckdosen (und arbeiten meines Wissens nach auch nur mit 110V)... Daher unbedingt 2x 12V1A Netzteile unabhängig mitbestellen.