GUB 31.8MM Double Clamp Carbon Fiber Super Long Bike Bicycle Handlebar Extender Extension Light Lamp Computer Phone Mount Bracket Stand Holder

This extender solved my problem: Handlebars with aero routing of cables have little space for accessories. I would have purchased this a couple years ago, but I thought a handlebar extender would span the width of the handlebar and would be ugly. I had little interest in a large, conspicuous product. Thank goodness this product is only wide enough to mount at minimum 3 accessories with comfortable space between. This product makes me smile because you might be able to link more of these extenders together to install even more accessories. So...is it really carbon? I don't know and I don't care. It's light and those handlebar stays are sturdy. One of my photos shows the scratches I put on the bar during installation. If it's a carbon bar, a clear plastic coating protects the bar, but that coating scratches easily. I do not care about the scratches. I expect I will have accessories installed on that bar at all times. My other photo shows there is only 3.5 CM of space between a 31.8mm handlebar and this extender. Those space limitations forced me to install a bike light mount facing toward my seat (and turn it 180 degrees so it would shine forward) because there was no way to install it with correct orientation. You might see some reviews that say this extender fails to clamp the handlebar, which causes it to drop down and become useless. If you have a 31.8 handlebar, you will not need to use the shims and this device will not allow that extender bar to move anywhere. I found this installed quickly and securely. For those of you asking if this extension is suitable as a handle, I would say no. It's just for installing bike accessories and it creates only 3.5 CM of space between your handlebar and this accessory bar. I have purchased 3 other GUB accessories; this company knows milled aluminum handlebar mounts. The greatest compliment I can offer this company is that I am going to buy another one of these extenders for my other bike.

Love the look, the feel, cost was great! The length fits perfectly on my bike and I’m able to mount 2 lights and a switch. The functionality works well, can adjust forward or back depending on preference. The durability seems great as it is made of aluminum brackets and the pipe is carbon fiber. Would highly recommend!

Pro's: it does provide extra bar space to mount other devices. It is light and seems durable enough (time will tell). Cons: The bar mount could be longer to allow more hand room beneath the bar and also raise a light even more to get over large front bags. As noted in another review. The bar is has a very small diameter. So you may need to add padding to device mounts so that they will work on it. I guess better than the opposite ... bar too big. Overall its worth the money though.

This was a piece of cake to install and adjust. The cf is amazingly light weight. I have an electronic bell on main handlebar of my stand-up e scooter, plus oem bell, so I use this for my bike light with rubber strap. I can still add another accessory or two, although I don't have a need to get a phone mount. I'm sure I'll come up with something else. The cf bar definitely adds to the look of my scooter. I would purchase this again if needed, w/o reservation.

I'm minimalist on my bike, but in addition to items I always have, such as bell and a couple of front facing lights, on occasion, especially for longer trios or bikepacking I have a bunch of stuff I want out front. And I have little to no room remaining on handlebars of my stock trek 730 setup. Occasionally I want the phone out front, a handbar bag, in some very off the beaten track, a garmin, and sure, why not, a faux pro. So I started looking at these extensions. Many are unnecessarily long, some have small USB power banks and/or integrated headlights. But frankly this "G UB" 20 cm/8" long extension, combined with existing space on my handlebars, is all I need for an entire suite of gizmos plus a good size handlebar bag. i could not be happier. The clamp system is strong enough for weight of a bag with a fair amount of bike tools and stuff, a somewhat heavy 22oz spare water bottle, and a few gizmos. I can set it higher than my handlebars, the same height, or as usually the case, lower, and it does not spin down even on trails. I will recommend you keep track of the rubber shim like pieces since the provided bar is of considerably smaller circumference than most handlebars, and most items will require those rubber strips. But if you do lose track of them, some electric tape, or some pieces from an old tire tube, will work very well. BTW I see in the q/a some people asking about using these as actual auxiliary handlebars. Absolutely do NOT do this as neither the bar piece nor the clamping system are anywhere near as robust as you would need for that. 10lbs of gizmos/bag/water bottle? Yes. But 30, 40, 50, 60 lbs of dynamic weight using them as secondary handlebars? NO.

I really like this bar, mainly bc my handle bars are very thin and these are able to clamp down significantly better than another brand on Amazon. My wife has the other brand on her, equally thin, bars and those just kept sliding. After examinations, the clamping design for these bars are much better then the other brand. I ended up purchasing a 2nd set of these bars. The reason for not giving 5 star is I was sent a set of bar/clamps that were CLEARLY used and a bit worn. The bar has deep scratches where it was tightened by the clamps. Some of the items that came with my first set were missing with these (fortunately i didnt need them). When I received my first set, i did have suspicion it was used, or at least test mounted elsewhere before being sent to me. It wasn't enough to be sure they were used but now i'm sure they were. Wouldn't recommend to anyone as i'd guess they would ship a used part. Maybe its a trend for people to use these and return, but looking at the mount, I'm sure i can find another brand with similar design .

Fits perfectly on Aventon handlebars and accommodates everything very well. The carbon fiber tube looks awesome, and the mounting brackets worked perfectly, be patient to get the bar positioned and centered just right and tighten it up. FYI, had to send the 1st one back as it was missing 3 out of 4 screws, amazon shipped the replacement and had it the next day with all the parts. Very pleased and highly recommend.

Very lightweight and easy to fit on the bike's handlebar. The tube is made of carbon. Perfect for adding instruments or for fitting narrower bars while keeping the standard gear and controls.

I got this from a bike packer guy on YouTube and I used it to hold my tent away from crushing my cables and it worked flawlessly. Highly recommended and weighs almost nothing.

This is well made the clamps are machined with precision its a very useful gadget for your bike. Very simple to install. Such a great addition to the bike for all the extra gadgets you want to mount.

Very easy to install. Gives you some extra front bar mounting options. Light weight and pretty strong. Angle and lateral mounting options abundant. Only problem is that they do not include inner spacing rings. My handle bars are very narrow and the mounting ring was way too large in diameter. I had to search around to find a spacer that would grip the handlebar for secure attachment. Big and careless omission on the part of the company. But if you can mount it properly it is well worth the money.

too short, plastic rod, stripped on one side. seriously, 33$...... maybe 5$..

returned, took a shot but obviously its fake carbon