52 Inch Gold Ceiling Fans with Lights and Remote Crystal Chandelier Fan

I kept buying fandeliers because I didn't want old fashioned fans with lights. This not only took away my night sweats but it's beautiful! Not what I expected at all! Even comes with white gloves to hang it because the crystals are very, very beautiful. Do recommend a smaller wattage bulb set then what they suggest you put in. It's blinding and completely takes the beauty away from the crystals. Highly recommend

Outstanding fan with remote. Fits perfectly in our room. Aged brass looks great. Lights up nice as well. Easy install.

I copied and pasted this review from someone else's. I did because it describes EXACTLY what happened when installed in my bedroom. It looks AMAZING though! It was H3LL getting it in! I 100% AGREE with what was said! Here goes! Initial review after installation: (Gold/San Diego model) I was concerned by other reviews saying the instructions were insufficient, just pictures, and not easy to understand. They heard that feedback and it now comes with a very nice instruction booklet with very clear and easy to follow instructions. This didn't necessarily make installation EASY though. When installing with the shorter rod, the housing cover simply does not give you enough space between the housing cover and the ceiling to do the wiring once the motor is hanging on the support bracket. It's maybe 2 inches max. This is the first of the 12 fans I've installed that had a remote that was not already wired to the motor and already secured into the fan housing where all you need to do is wire to the ceiling. Wire that before you try to hang it because someone will have to stand there and hold the HEAVY motor housing over their heads while you wire it to the house and then try to get the rod ball onto the bracket. (This also requires a SHORT, stubby little screwdriver because there's only a few inches to work with. The gold parts of the fan scratch incredibly easily. Like. INCREDIBLY easily. Should have had a plastic wrap around it to protect it during installation that you can peel off after it's up. Even after putting the blades onto the brackets beforehand, attaching the brackets to the motor is very difficult, because there's very little space for fingers to fit. This is definitely not like the more common "easy to imstall" set ups there you slide the blades into place or have a tension clip to hold the brackets on. Attaching the light fixture is also a pain just because instead of having the little L shape to slide the light kit on and turn it then tighten those tiny screws, or having the screws in the outer layer held in place so you can tighten them, it's made where you have to hold the also heavy light kit exactly right and get a tiny screw into a very tight space. To top it off- the light kit only has TWO light sockets... for the tiny candelabra bulbs... (Not included) and they're 25 Watt MAX. This is NOT ample lighting for any room. That's less than a night light for a baby! So you will need to get some LED bulbs that only use 7W but equal to much higher. It will be pretty difficult to change bulbs in this. You can stand on a step stool and put them in over the top but otherwise you'd have to remove some of the preinstalled crystals, which may break the delicate pins holding them on. The blades are a nice color but pretty thin and appear to be something similar to contact paper overlay. Definitely lighter and thinner than the one we took down. Overall it's really pretty in my daughter's room. She has a smaller chandelier in the corner hanging over her desk and this fits right in. It's lower output than I expected, but more than the other models offered by this brand. They need to work on improving the output of the fan and adding some real lights to it. Why not an E26 instead of E12 so you can put a regular bulb in it?! Remote works well but there's a tiny screw to take out to pull the battery tab out and the remote uses a button cell instead of AA/AAA. They included screws to mount the remote housing but not a self adhesive option like most of these have. I wish someone would make one that actually fits over the top of the switch that it replaces. Overall- installation was annoying and took longer than I feel like it should have but not because it was hard to figure out. It's from having such tiny spaces to work with. Implementing some of the easy install techniques wouldn't cost the company anything and would make a huge difference for the consumer. It's function is just ok but should be significantly better, given the technology available today. It looks really nice in the room though. That's the only thing adding back the 4th star.

Absolutely love this fan. It was just the bling I was looking for. Beautiful and easy to install. Fan is nice and quiet and very bright light. Only drawback is you cannot adjust the lights.

Love this fan. Very fancy and love the gold tone. Picture reflects a very bright light, but truthfully its not as bright as I would like. I placed the bulbs specified in the instruction manual and will have to get brighter ones, but for now with the low light its perfect where i have it. Fan feature is great has a powerful air output on Med and High speeds. The low works great as well. Very happy with my purchase but remember to purchase a higher wattage for brighter lighting.

Update- taking away 3 more stars over the stupid lights on this thing. Even with the highest wattage LED equivalent, it's still just not bright enough with the 2 tiny chandelier bulbs. Now I'm thinking I'll end up having to return this, which will be a complete pain in the butt. Initial review after installation: (Gold/San Diego model) I was concerned by other reviews saying the instructions were insufficient, just pictures, and not easy to understand. They heard that feedback and it now comes with a very nice instruction booklet with very clear and easy to follow instructions. This didn't necessarily make installation EASY though. When installing with the shorter rod, the housing cover simply does not give you enough space between the housing cover and the ceiling to do the wiring once the motor is hanging on the support bracket. It's maybe 2 inches max. This is the first of the 12 fans I've installed that had a remote that was not already wired to the motor and already secured into the fan housing where all you need to do is wire to the ceiling. Wire that before you try to hang it because someone will have to stand there and hold the HEAVY motor housing over their heads while you wire it to the house and then try to get the rod ball onto the bracket. (This also requires a SHORT, stubby little screwdriver because there's only a few inches to work with. The gold parts of the fan scratch incredibly easily. Like. INCREDIBLY easily. Should have had a plastic wrap around it to protect it during installation that you can peel off after it's up. Even after putting the blades onto the brackets beforehand, attaching the brackets to the motor is very difficult, because there's very little space for fingers to fit. This is definitely not like the more common "easy to imstall" set ups there you slide the blades into place or have a tension clip to hold the brackets on. Attaching the light fixture is also a pain just because instead of having the little L shape to slide the light kit on and turn it then tighten those tiny screws, or having the screws in the outer layer held in place so you can tighten them, it's made where you have to hold the also heavy light kit exactly right and get a tiny screw into a very tight space. To top it off- the light kit only has TWO light sockets... for the tiny candelabra bulbs... (Not included) and they're 25 Watt MAX. This is NOT ample lighting for any room. That's less than a night light for a baby! So you will need to get some LED bulbs that only use 7W but equal to much higher. It will be pretty difficult to change bulbs in this. You can stand on a step stool and put them in over the top but otherwise you'd have to remove some of the preinstalled crystals, which may break the delicate pins holding them on. The blades are a nice color but pretty thin and appear to be something similar to contact paper overlay. Definitely lighter and thinner than the one we took down. Overall it's really pretty in my daughter's room. She has a smaller chandelier in the corner hanging over her desk and this fits right in. It's lower output than I expected, but more than the other models offered by this brand. They need to work on improving the output of the fan and adding some real lights to it. Why not an E26 instead of E12 so you can put a regular bulb in it?! Remote works well but there's a tiny screw to take out to pull the battery tab out and the remote uses a button cell instead of AA/AAA. They included screws to mount the remote housing but not a self adhesive option like most of these have. I wish someone would make one that actually fits over the top of the switch that it replaces. Overall- installation was annoying and took longer than I feel like it should have but not because it was hard to figure out. It's from having such tiny spaces to work with. Implementing some of the easy install techniques wouldn't cost the company anything and would make a huge difference for the consumer. It's function is just ok but should be significantly better, given the technology available today. It looks really nice in the room though. That's the only thing adding back the 4th star.

Beautiful, runs very smooth and quiet nice controller

Love the look of the fan!