AKK 5.8G RC832 Mini FPV Receiver Double-Screen Display for FPV Quadcopter Drone

Great component for my FPV ground station system! Aluminum body looks and feels rugged. I had no problems with QC on my unit, all connectors are present and spoken for, and work correctly. Reception is excellent. I had no abnormal breakup flying my Hubsan H502S on it using an old television I had laying around. The power connector says "12v input", however the receiver module housed inside is rated down to 7.0v, so it works perfectly fine on a 2s LiPo. (This has been tested and confirmed.) The receiver does get modestly warm after using it for a while, however this appears normal. Receiver does not have any weird "blue screen", and passes any signal (or static!) that it receives through. I can't speak for the screen device you connect it to. I bought this to use as a tandem ground station screen set and DVR recorder, and it will fill this role fine. The power jack is a 3.5mm barrel connector with a positive core. The included power cable has a JST-female port. It will work great on 2-3S batteries. The two analog output cables are 2.5mm "headphone" connectors, like you used to see on phone headset connectors. The pinout is non-standard!! The ring closest to the cable is common. The next ring is audio out. The third ring is video out. The "tip" of the connector is /not connected/! Bear these in mind if you wish to build your own AV cables for this. -- Coming back here for additional commentary. It looks like the unit has been revised and/or altered since I bought mine. Another reviewer bought theirs and encountered problems with my review and specifically my comment above, as the unit had been revised to use a more standardized cable. I offer my apologies to the user I led astray, and any others affected by this problem.

Livraison ultra rapide commander le dimanche 22h30 et reçu le mardi 13h. Fonctionne très bien et facile d'utilisation

This receiver is better than the stock receiver in an ev800 or viper google monitor. I use it in an entertainment room connected to a projector for passenger use. There is no blue screen when the signal gets weak, and the range is great. There is a little lag in the video being processed by the projector I know, I'm not sure of the lag with a good lcd, so I don't use it to fly with, I use my goggles, but for passengers it is great.

I don't know why reviewer Josh said this is non-standard pinout. That caused me some problems... couldn't get it to work until I found the pic attached which shows this is a standard pinout, i.e. Gnd/Video/LAudio/RAudio. It works fine plugged into my DJI Goggles V2 as well as my Eachine EV100 goggles using the cable that came with Eachine DVR.

Bought this as a replacement for a previously purchased one. After some testing found that problem was occurring due to heating of the Module after a hour of use. Utilized an old IC heat sink I had laying arround to help dissipate the heat. Operated for 5 hrs. Continously, no problem now.