MOKOSE Webcam Stand, Stands Bent 360 Degrees for Mounting on a Monitor or Laptop Mount with 1/4" Thread

The default mount that comes with the Logitech Brio 4K webcam had a slight overlap with the viewable area of my monitor (HP x34) due to the thin bezel of the monitor. This mount was a perfect solution! The Brio's mount has ~12mm of overhang while this Mokose mount has ~7mm of overhang. This just clears my monitor's viewable area with ~0.5mm to spare. Very easy to install. The flexible "arm" is sufficiently rigid to hold in place on the monitor. I did add a small strip of double-sided foam tape at the very bottom of the arm to prevent any movement. The silicon surface of the arm doesn't offer much friction against the textured backside of my monitor. This wasn't inherently a problem, but I don't plan to move the mount around often (ever?). The screw mount "hump" could be a bit more adjustable. It's sufficient for my needs, but the range-of-motion is a bit limited and would be the only area I could suggest improving. Overall, super happy with this purchase. NOTE: if you have a Logitech Brio, the original mount actually pops off (give it a good tug or rock it laterally) to reveal a 1/4"-20 threaded insert that attaches to standard camera mounts (like this one).

Good product. A bit "light" for my purpose - I purchased it to use with my Logitech BRIO of the first generation, which is quite a heavy camera for this "light" mount, but somehow it could be fixed even with the Logitech BRIO; but with any lighter webcam it will certainly work perfect. The only thing I don't like is that you can't turn your camera lef-right when it is screwed to this mount the only flexibility allowed to move the camera up and down, meaning you will have to turn your notebook to achieve the right horizontal positioning. Otherwise, it is very good.

I only just received this but had no problem getting it set up with my relatively heavy AnkerWork B600 video bar. It’s very flexible, but could benefit from inclusion of a washer since turning the 1/4” threaded mount too tightly will result in it popping through the silicone. Obviously you can pop a washer in there. For the time being I’ve just loosened it a bit and we’ll see how it holds up. If this product develops any obvious problems I’ll update my review, but I expect it will just happily sit there for a long time. It has to be better than the OEM mount, which literally crumbled after a year. Update: The good: After using this mount for several days, it stays in place, the camera doesn't tip, and it has made my webcam useable again. The bad: The two cables in back of the webcam have tension on them which slowly causes the webcam to be pulled off center over a period of hours. This definitely isn't the sturdiest mount out there.

This camera mount is a flimsy piece of garbage that is useless for the purpose it is being sold to fulfill. Difficult to mount to camera because the screw is not integrated in the mount and it requires a flat head screw driver instead of simply tightened with thumb. The mount won't hold shape to stay in position on monitor and is too weak to support the weight of a tiny Campark V40 action camera. Once camera is securely attached to the mount, there is no way to aim the camera without trying to reshape the flimsy plastic mount and miraculously manage to coax it to maintain position and bend angle. Absolute scam that they sell this thing for any purpose but going into a land fill.

Good product that works as intended, though priced a little high for what you get. I'm using this with a selfie light that has a 1/4" screw base. Since I wanted the light pointing slightly downward, the forward weight caused the mount to fail. I solved this by counterbalancing the back with binder clips. With the counterbalance, the mount works fine for my application. Pros: 360-degree flexibility, works with 1/4" thread accessories Cons: Overpriced, can't handle forward-tilting weight without counterbalance Works well but may need modification depending on your use case.

You're good to order this now - super simple. Before i ordered this, I read the bad reviews and the middle reviews too, to see if there are any legitimate problems. But now after receiving this and then pairing it with a simple rotatable cell-phone tripod shoe-mount (purchased separately), I am glad I didn't keep looking for something else or something more complicated. The teeeeny tiniest issue is that the the bolt is a bit too short to easily get the screw-in to whatever you're screwing into to catch (because of the rubber washer thickness). But don't give up, you just have to keep it lined up and press (to compress the rubber washer enough), to get the threads to meet each other. A screwdriver helps. And the groove of the bolt-head is big and will work with any screwdriver. And unexpected bonus - the item is wide enough that it works as a desktop stand just as easily as on top of your monitor. Doesn't tip easily, even with a lightning cable plugged-in so you can keep charging while in-use.

Does exactly what it's suppose to do. It's much firmer than the webcam stand that came with my webcam. Because of that it actually holds its position. Not sure why it's been so poorly rated here? It's the best option I could find online

It's very lightweight. I tried using it with a GoPro 11 Hero and when you angle the camera properly it's too top heavy and it falls forward. Also the screw is not held captive so it's going to get lost if you move it around very often.

Leicht einsetzbar

I'm very satisfied with the customer service, thank you StarLineStore.

It’s what I wanted. Curved bendable soft mount with 1/4 inch screw on top. For monitor mounting.

Sturdy product. Works as expected. Flexible but also and stays in the same position.

前提としてWebカメラに雲台が装着できるカメラしか取り付けできませんので注意が必要です。マウントは曲げやすく柔らかすぎずで自分の好きな位置に装着しやすいかと思います。カメラを固定する軸部分は若干緩いため、カメラを触ったりすると決めた位置からずれてしまうことはあるかなと思います。最近のWebカメラのマウントは割と調整しやすいものが多いと思いますので、紛失したなどのことがない限り交換用途では不要だと思います。