UniBond Stop Mould Silicone Sealant for Kitchen & Bathrooms, Translucent, Repels, Kills and Prevents Mould Growth, Long-Lasting Shower Protection, 1x274g Cartridge

I used this around the bathroom sink and shower area, and it’s been a solid performer. It applies fairly smoothly and gives a clean white finish that looks tidy once set. The anti-mould protection is a big plus, especially in areas that are constantly exposed to moisture. It seems to hold up well and hasn’t shown any signs of discolouration so far. It does take a bit of care to apply neatly, as with most silicone sealants, and you’ll get the best results if you work quickly and smooth it properly before it starts to set. The cartridge fits standard guns and is easy enough to use for DIY jobs around the house. A dependable sealant that does its job well and helps keep kitchen and bathroom areas looking clean and protected.

I bought the UniBond Bath & Kitchen Mould Resistant Silicone Sealant for a bathroom repair project, and it has been an excellent product. It was easy to apply and gave a neat, clean finish around the areas that needed sealing. The transparent silicone blends in well with different surfaces, making it a versatile choice for bathrooms and kitchens. It creates a strong waterproof seal that helps prevent water from getting behind tiles, baths and sinks, which is exactly what you need from a good sanitary sealant. The mould-resistant properties are a great feature, especially in damp areas where standard sealants can quickly become discoloured. Once applied and left to cure, it feels durable and provides a long-lasting barrier against moisture. Overall, this UniBond sealant is a dependable choice for DIY jobs around the home. It is easy to use, creates a professional-looking finish and offers the protection needed in wet areas. I would happily recommend it for bathroom and kitchen sealing projects.

I used UniBond Anti-Mould White Silicone Sealant to reseal several areas in our bathroom, including around the sink, the base of the toilet, and the edges of the shower. The sealant came out smoothly and was very easy to work with, even for someone like me who isn’t a professional. It spread evenly without clumping and was simple to neaten up with a finishing tool. By the next day it had dried completely and now feels fully waterproof with a clean, bright white finish. The anti-mould protection is a big plus too, as these areas are always prone to damp and staining. Overall, I’m really pleased with the result – it looks neat, seals perfectly, and has refreshed the whole bathroom. I’d happily buy this again and would recommend it to anyone needing a reliable, good-quality sealant.

I always use this bathroom sealer. Works as expected and dries in reasonable time, I always leave it overnight to make sure thoroughly set. Tough sealant. Lasts a few years. I used a razor blades scraper to remove old sealant, removes this brilliantly. I also mask off the area I want to apply to the sealant at and use a rubber gloves wet finger to smooth.

I used this UniBond White Silicone Sealant to re-finish a kitchen worktop. After two years, the majority of the sealant is still bright white, however, there is a small patch of black mould on the section just behind the taps. To apply the sealant, I found the best method was to use a plastic sealant finishing tool (See below). This tool helped me to smooth out the sealant and create a clean, professional-looking finish. It also made it easy to control the amount of sealant that was applied, which helped to prevent any excess from building up. The sealant itself was easy to use and had a nice consistency, making it easy to spread and smooth out. It had a typical sealant smell and didn't cause any irritation when I used it. In general, I found this sealant to be a good quality product that was easy to use and provided a nice finish. However, the small patch of black mould on the section just behind the taps is a reminder that it is important to keep the surface clean & dry. Applying this can be done with a standard caulking gun, but for a more professional finish, a plastic sealant finishing tool can be used. Here are the steps to apply the sealant with a plastic sealant finishing tool: (YouTube also has some good videos showing how to apply it using the tool) 1. Cut the nozzle of the sealant tube to the desired width. 2. Apply a steady and consistent bead of sealant along the area where you want to seal. 3. Use the plastic sealant finishing tool to smooth out the sealant, ensuring that it is evenly distributed and fills all gaps. 4. Use the tool to create a smooth and clean surface, paying special attention to corners. 5. To apply the sealant around corners, hold the tool at a 45-degree angle and use the corner of the tool to press the sealant into the corner. Then use the flat edge of the tool to smooth out the sealant, making sure that the corner is filled and the sealant is flush with the surface. 6. Clean any excess sealant with a damp cloth or paper towel. 7. Allow the sealant to dry and cure according to the manufacturer's instructions. It is also important to note that the surface should be clean, dry and free of any mould before applying the sealant. If there is any mould, it is important to remove it before applying the sealant in order to ensure the sealant will adhere properly and prevent the mold from coming back.