Donner Noise Gate Pedal, Noise Killer Guitar Pedal Noise Suppressor Effect 2 Modes for Electric Guitar and Bass True Bypass

I’ve tried multiple noise gate pedals over the years, and the Donner Noise Killer has seriously impressed me. If you struggle with unwanted hum or interference—especially with high-gain setups—this pedal is a lifesaver. Two Modes for Ultimate Flexibility The Hard mode aggressively cuts noise, perfect for high-gain, distorted tones where you need a firm gate. The Soft mode is smoother and more natural, ideal for preserving sustain while subtly eliminating background noise. Switching between the two is seamless, and both modes deliver a crisp, noise-free output. True Bypass & Signal Integrity Unlike cheaper alternatives that interfere with tone, this pedal maintains a clean and transparent signal path when disengaged. No tone suck, no muddiness—just your pure sound when the pedal is off. Compact & Built to Last The metal chassis feels rugged and sturdy, yet it’s compact enough to fit comfortably on any pedalboard. The simplicity of the controls is a huge plus—no unnecessary complexity, just efficient noise suppression. Perfect for All Guitarists & Genres Whether you play metal, rock, or even ambient cleans, this pedal adapts beautifully. I’ve tested it with single coils, humbuckers, and various amps—always delivering stellar results. If you’re looking for an affordable yet high-performing noise gate, this Donner pedal is a must-have.

Placed at the end of the signal chain before the amps, it tames my noisy board, especially when playing high gain. Easy to adjust, I prefer the hard cut toggle setting. The noise floor will still be there, but gets cut off quickly off when not playing. I can't expect more from a $30 pedal. It's going to be difficult to knock this off my board.

This sturdy little pedal came in a nice magnetically closable box with a quick but useful owner's guide and a couple cute Donner stickers (I believe all Rock 'n Roll goodies should come with a cool sticker! ;-). I play mostly hard rock and metal (a lot of that drop tuned D, Db, C and B). I was tired of getting almost instant feedback (in my setting - a small 12x14 room with a 40watt all tube Marshall DSL40). I don't like using the amp in Triode mode (reducing and cutting the output power in half). Needless to say, there was a lot of unwanted noise (and feedback) coming out constantly and almost instantly. Most of my 'effects' pedal plug straight into the front of the amp (first - last: Tremonti Dying Machine Way, Joyo Compressor, Tube Screamer Mini, and a Fulltone OCD distortion). I've patched this Donner Noise Killer along with my EarthQuacker Dispatch Master Delay/Reverb and volume attenuator pedals through the back FX Loop of the amp to get the most noise reduction without affecting the tone or the effects of the other pedals (besides which, this is a True Bypass pedal). As mentioned above, I use a JHS Little Black Amp Box 'Passive amp Attenuator' to cut back the overall volume output of the Marshall amp so I can turn up the Volumes to get into the sweet-spot of the amp itself without blowing my head or the roof off! Combined with the Donner Noise Killer pedal, these work perfectly to manage volumes and unwanted noises! The pedal has both a potentiometer Dial (ranges between -60 and +10db) and a Loud / Soft switch. I find it's happy place is switched into Soft mode (which Donner recommends for most playing styles in the leaflet/manual) and the Dial set just a tad below -40db. I had to play with this a bit to find the sweet spot where I still get sweet sustain and I'm able to kill the unwanted noises. As Donner designed, it's easy to adjust and I was jamming within a couple of minutes. There's just a little "pop" when stomping the the ON/OFF button that is audible through the amp. It's not terrible however. Besides, it on all the time now anyway. Not a concern... The difference in my setup/setting is like night and day concerning the ambient noise that's "killed" as well as the amount of feedback I cut out with this little guy! With it turned off, there's a definite buzzing noise coming out of the the amp. With it on, it's completely gone! With this on and set as described above, the amount of unwanted feedback is pretty much cut out while playing as well. Now there's plenty of time to palm-mute and turn down the guitar volume between songs. There maybe a better Noise Killer on the market. You might have a buy a few to find it. You'll probably be paying 3x the price as well and it'll be, more than likely, more cumbersome to dial it in. What's left to say? I'm satisfied with this well built Donner Noise Killer. Buy it! I bet it works for you they way it working for me.

I bought this at the recommendation of another guitar player who was using one of these as a backup to his MXR Smartgate he has been using for years. He told me he bought the Donner as a backup but was so surprised by the quality, he said I should try it as the price/performance was amazing. So, this was delivered the other day and I've had the chance to use it several times. I put it after my Joyo Vintage Overdrive (noisy) and Skreddy Lunar Module (fairly quiet unless turned up to high levels) but before my modulation/time effects. Honestly, I really don't turn on the Donner much for the Skreddy unless I crank up the fuzz to crazy levels or combine it with the Overdrive. However, when I use the Overdrive, whether alone or combined with the Skreddy, it gets really noisy. This is where I have been pleasantly surprised. The Donner is very easy to set with one dial and I was able to fine tune the Threshold (on the Soft filter setting) to where it cuts out most of the noise but still allows me to have significant sustain (I'm using a Fender Stagemaster FAT SSS). This also works well as I can kick in my compressor (which amplifies noise; MXR Dyna Comp) which furthers the sustain and can boost the levels even more without a lot of noise (i.e. it's a lot quieter). I haven't used the Hard setting, so I can't speak to that, but the Soft has been plenty. FYI, I did have a Boss NS2 that died on me. The NS2 did a good job of filtering but I found it to have a harder cut than the Donner. Also, the NS2, with numerous settings available, takes some more tweaking but does allow more options. The Donner is very quick and intuitive to set with a pretty soft cut (at least on the Soft setting). The Effect Loop on the NS2 was a nice option and allowed me to run my noisy pedals through the loop and bypass the modulation/time based effects. If your looking for more settings, options and fine tuning, the NS2 may work well for you. If you want something that is easy to set, does a good job, takes up very little space on your board, the Donner is a great option. I wish I could compare this to additional noise pedals, but I can't. For me, this pedal is worth every cent and a small investment.

Review is for Donner Noise Gate Pedal, Noise Killer Guitar Pedal Noise Suppressor.... Upon setting up my pedal board, I noticed the dreaded "hum" on high gain using a modeler. Figured I would give this a try to see if it gain reduce or maybe ELIMINATE that high gain "hum"..... I put this as the FIRST pedal in my chain. Well...I am here to tell you this little pedal works wonders. Completely eliminated the "hum" and now silence. That is until you hit a string, then you actually realize how loud your volume is. Connected a 2nd guitar, which has a grounding issue, where if I touch a covered pickup, I get noise/feedback/or reduction of same.... This pedal completely eliminated that noise. I couldn't be happier with this performance of such an inexpensive purchase. Has made it so that I DO NOT need to reduce the gain settings in my presets, like I had to do in order to get usable, high gain, low noise - working tones, prior to putting this pedal on my board. Works wonders for me, with only turning the control knob about to the 10 o'clock position. Completely removes all hum and noise. Wow. Impressed. I did not notice a difference in tone....just turned the knob until the noise was gonzo. While there are lots of noise gates on the market, which I do not have experience with....give this one a try....without breaking the bank....it works for me.

It works great and was exactly what I needed.

Fantastic budget noise killer. I love my p90 pickups, but let's be honest - the hum can be loud. This pedal, when activated, completely kills the hum. I'm sure there are some that are better and have more features, but this seems to do the job quite well and inexpensively.

Cuts out all unwanted noise with minimal if not no difference in tone I love this thing Update: so not sure if mines broken but even on 0 the pedal is adding a clipping gain like sound to my tone (sorry for the shaky hands)

Smidigt format, lättanvänd och gör sitt jobb

シングルコイル特有のジーというノイズが消えてお値段以上の価値があります。BOSSのNS-1ような高性能ではありませんが必要十分です。

works ok but after some time it dident seem to cut the noise for some reason, it may one of my batteries loosing power so ill try it out again later

Hab das Teil gerade ausprobiert und es macht was es soll und das ohne groß etwas einstellen zu müssen! Die Verarbeitung ist super und der Lärm wird definitiv gekillt! Wirklich ein geiler Noisegate für n schmalen Taler!

Pedal de puerta de ruido imprescindible en cualquier pedalera de guitarristas y bajistas, funciona fenomenal a un precio irrisorio, no hay necesidad de comprar caros pedales si este te da lo mismo. Totalmente recomendado.