ROVSUN 9000 BTU Mini Split AC/Heating System with Inverter, 19 SEER2 Energy Saving 115V Ductless Split-System Air Conditioner with Pre-Charged Condenser, Heat Pump, Remote Control & Installation Kit

Work great. I have purchased over 4 units and all are working. I use the 115VAC model because I operate my home on solar. Very efficient on power use and QUIET!. Don't waste your money on noisy window mount units. Takes 4-6 hours to install, If you have an AC friend that can vacuum the lines after install, verify no leaks, just open the valves on the compressor unit and it is pre-filled with refrigerant.

I PURCHASED THIS FOR A 34'X12' SHED. IT WAS EASY TO INSTALL AND WORKS PERFECT FOR THE AREA. LITERLY HAD IT INSTALLED IN LESS THAN TWO HOURS. ATTACHING THE LINES IS EASY. VACUMNING OUT THE AIR WAS EASY.

The media could not be loaded. Bought it, had an ac guy install it for me in my 200 sq/f shop (overkill was intentional). it worked great that whole summer. Didn't use the heater the following winter, so never got to try it out.This past fall, (2024) it stopped blowing cold air (Louisiana falls are just extra summer) and displayed an error code E0. I reached out to their support team and explained my problem, they replied back with a troubleshooting guide for the E0 code and told me they’d replace it under warranty if it turns out to be broken.I had my ac guy out at the beginning of this year (01/07/25) and he found that it was the outdoor unit’s control board.I emailed this to Rovsun support, not asking for a handout, not complaining about their product, but asking where I could purchase a new control board (by this time I was certain I was out of warranty)It’s been almost two months and I’ve heard nothing back from them.I don’t like writing critical reviews, but I gave them my money, they gave me a product that broke after a year, and won’t even sell me the part to fix it..Will update if something changes.***UPDATE:Since the past update I’ve removed the control board and gotten into diagnosing it myself..since there is no support offered.With that being said, I’ve found the issue.The 15 amp slow burn fuse was blown, which is often a symptom of failure, rather than a cause. I removed a massive heat sink from the board to reveal a blown MOSFET, with no thermal paste on it.What use is a heat sink if you don’t use thermal paste? I inspected the other components and thankfully, they were still in good working order.So I’ll be replacing the MOSFET, a fuse, and adding thermal paste, and seeing if I can get it working again.If you’re not comfortable doing any of this, I’d advise spending the extra money on a quality product with quality support, as this product was not a diamond in the rough, but rather a plastic gem, that you’d find in your average ¢.25 machine at the grocery store.To sum up, I got what I paid for.

This was a fantastic buy $$$ cool’s are 500 sqf + room it turbo blow’s fantastic and it is super supper whisper quiet.the ECO mode all so a plus. And it heat the room without ease.!Wife and I have decided to buy one moor unit for the living room it has the feel of being in a #5 ***** Hilton Hotel. It was very EZ to install you need a special fitting for the AC Gauge vacuum pump, which you can also buy on Amazon very EZ to fallow institutions.i did this by my self one handed.i do recommend getting moor Insulation for copper lines and good Insulating tape.lines are all very long so plan out your spot not to have to much line Coiled up behind the outside, AC unit and a place for the condensation line to drain correctly.a good cord less drill to set concrete anchor’s I used RED HEAD’S bot at Home Depot and a Disconnect 30 amp fuse box for the outside connection and a double pole breaker at the panel. Our room had to designated plugs, so the install was very easy after switching out a breaker.it dose not use to hi of AMP’s depending on what you have for power I don’t see a problem putting a Disconnect box and piggybacking off a existing outlet with a GFI or fuse disconnect box to securely protect the AC from any power outages, power, spikes or drops. I did this out of just overly protecting it, I also drilled through the concrete and set a 6 foot ground copper rod grounded that as well to the disconnect box and the circuit. Our home does not come with a ground. It is ground through the conduit so adding that was just a precautionary, it ties into the neutral leg of the panel with some advice from All pro electric in Rancho Cucamonga CA. Master electrician.i give this project a1 out of 10 on a difficulty level of a two.! For do it Self Project .And give the Product a hard, five stars.! #5 ***** wife and I did consider putting in a replacement wall A/C witch cost moor money then then this split unit $400-$600 for the same or Slightly bigger BTU it all so takes way less time to heat and cool then a wall unit and No noise I can’t specify that enough whisper quiet.the the cost of the split unit with shipping charges was Equivalent to our or slightly less $$$ than a window/wall unit, AC and without the ugliness and bulkiness and The noise that a wall or window unit makes of a traditional wall unit.it all so uses less power than a traditional AC unit for a older home without central AC and heat.has a grate Updated Decor and Modernized the room. I can’t thank the company enough it is and dose what it Describes too a T.!!!.

Almost a year and blowing cold. It is in my garage/gym, which is not insulated. This unit makes the workouts bearable during the Summer Texas heat.