Homall Office Chair High Back Computer Desk Chair, PU Leather Adjustable Height Modern Executive Swivel Task Chair with Padded Armrests and Lumbar Support (Black)

The chair is of high quality and is easy to put together, even for a mechanically challenged person like me!! I purchased and assembled two of them!! It is very attractive and we have gotten compliments from those who have seen them. It is extremely comfortable and I would highly recommend.

Had some issues with Delivery! But got the chair. Beautiful and comfortable. Had one once before as a gaming chair, same kind but bought it from walmart. I used to fall asleep in it all the time. Now i have it for work! One of the best chairs for the cheapest price you can get! If you want a more comfortable chair then this..... your looking at about 300 bucks. Which is next on my list! It comes with its own screws and washers. The manual is self explanatory however you do kinda gotta play the guessing game. It's pretty simple! match the screws up with the ones in diagram. It comes with an Alan wrench. Your hand might be a bit tired tho. I advise to tighten them with super lock tight or gorilla glue so they never come unloose. And gorilla glue the bolt covers on. Keep in mind if you use gorilla glue..... they will never come off. Lol. But as far as tighting it.... do not over tighten it. Tighten enough to where you have to put some pressure on it to turn it half way and stop. Another tip, it's a bit of a pain to set it up with one person. If you got an extra set of hands... use em. If not.... you might be their for a bit. Start with setting up base. Then put arms on seat. (Keep bolts loose but screwed in. You'll see why later when you tighten them down) Then attach back to arms and seat. (Now make sure bolts are in holes and tighten them down. But not at once! Do about 4 turns, move to another one. Then the other side. It's like tightening lug nuts on the wheel of a car. If you tighten one all the way down it will throw all the other bolts off and make it much more difficult to ease the bolts into the holes they go in) Then attach seat to base. Believe me. It's way easier if you do it like that instead of how the installation instructions say. After that, put the caps on the holes to cover the bolts. If you don't glue them, they will pop off ..... their not..... super good. But!!!! 1 or 2 drops of gorilla glue and you never have to worry about them popping off. (They seem like they go on their tight, but they don't stay on!)

Once I figured out the arms had a left and right...the chair was easy to put together. The faux leather is nice. The seat is (or will be once I break it in) very comfortable. I have 2 minor complaints. It is extremely straight up and down. I haven't had much chance to play with it to see if I can get it to recline even an inch. That would help. And number two, it's HOT. I'm going to have to get some sort of seat pad because the pleather is not breathable and every time I get up my bum is sweaty. I know, TMI. But all in all I think it will serve my purposes.

Comfortable chair as advertised. Assembly time about 20 minutes with one screwdriver needed. (Note: don't follow the instructions included. Lay the left arm assembly down on the floor and THEN affix the seat, followed by turning that over on its side and adding the right arm assembly. Trying to affix the two arms in an upright position is too difficult as directed.) The only thing I don't like about it is the fluted upholstery on the seat and back, where a bit more padding would have helped greatly. Otherwise, it's comfortable and functional and reasonably priced. Delivery was on time. ADDITIONAL COMMENTS AFTER 18 MONTHS OF USE: I've used the chair for 6-8 hours a day. The leather on the arms is cracking in multiple places. This is a big disappointment. And speaking of the arms, there's a major problem with the sewing of the leather on the outside edge of both left and right arms: the stitching is on the top at the outer edge, which means that it forms a jagged edge that your arms scrape on when resting on the leather. That jagged edge scraping my skin has caused a great deal of chafing, is most irritating, and could have been avoided entirely if they had just applied the stitching one inch further down on the side rather than along the top flat edge. This is a major design flaw. I will not buy this chair again because of the one flaw and the too-thin, cracking leather on the flat top of the arms, which is too bad, because it's fine in all other ways.

Good quality and with instructions easy to follow

I work from home, so having a really comfortable chair that supports my back and provides me a nice place to sit for 8 hours is really important to me. I ordered this chair in March 2023 and was really happy with it at first. Sleek, easy to put together, and comfortable. I then had an issue with it because after I sat on it while wearing leggings, the entire seat and armrests turned black from the fabric. No other furniture I own turns black from my leggings. I reached out to the seller and they were kind enough to provide me a replacement for the seat and the two armrests at no charge. I went through the whole summer and didn't wear leggings. However, I am now in Oct 2023 and wearing leggings again. The chair seat and armrests are black again, but there is also a lot of wear to the chair in general. I understand I sit in it a lot, but the seat lost its comfort factor. Additionally, I lean on the left armrest a lot and it shows - there is a large indent on it. The fake leather material is just not for me and the chair no longer looks attractive. I wish it lasted longer considering how much I paid for it.

Beautiful chair, comfortable and rolls well, the directions were not very clear, we had the seat on backward at first, but finally figured it out and the chair is perfect, I've had it over a year and it works perfectly

I purchased the Homall Office Chair in March of 2022, with high expectations of comfort and functionality. I liked how the chair looked, its price point, and it received positive reviews. Unfortunately, my experience with this chair has been underwhelming, to say the least. Several issues, ranging from poor quality to difficult assembly, have left me deeply dissatisfied with my purchase. Let's start with the assembly process, which was an absolute nightmare. The instructions provided were not terrible, but not great either. It took me significantly longer than anticipated to assemble this chair, and I consider myself fairly handy. If you're not well-versed in putting together furniture, you may find yourself extremely frustrated. Another significant issue I encountered was with the chair's hydraulic cylinder. It has already started failing, causing the chair to slowly sink, regardless of the adjustment settings. This rendered the height adjustment feature useless and made for an uncomfortable seating position. I expected a durable and reliable chair, but sadly, this was not the case. The armrests were also a major disappointment. They started to deform and indent where my elbows and arms sit. The rest of the chair is fine. I can sit it in all day, so that is a positive. I mainly lean a bit forward and don't have time to lounge backward. On top of all these issues, the Homall Office Chair proved to be quite noisy. Whenever I shifted my weight or made any slight movements, the chair emitted creaking and squeaking sounds. Not only was it an annoyance, but it also disrupted my concentration while working and is embarrassing on conference calls. Having such a distracting and low-quality chair in a professional environment is disappointing. If I read this review I would have a couple of questions about the reviewer. I am 6'3" but well below the recommended weight. I review plans and specs as part of my job, so I am good with instructions. My hobby is woodworking which requires skill and a calm demeanor. Yes, I did retighten any connectors that became loose through normal wear and tear. I should have spent more money on a quality chair since I am now looking to purchase a different chair 1 year later. I would advise others to take that into consideration. Spend a little more and keep less junk out of our landfills.

Una belleza de silla, se puede hacer mas alta que las habituales, fácil de armar y muy cómoda.... el material se siente exquisito de muy buena calidad totalmente vale la pena, la verdad estoy encantada y espero me dure mucho... estuve por mucho tiempo buscando la silla ideal y creo que al fin la encontré.

I’m really disappointed with my purchase 1. The leverage does lock in place!! 2. One hand-rest screw was missing so I had to go to the Canadian Tire only for buying a single screw!!!!! 3. You won’t be able to tilt the seat-back forward and backwards!!!! It shipped on time and the assembly was not a pain

تجربتي مع كرسي الطلب من أمازون كانت سيئة للغاية. الجلد الصناعي الذي يغطي الكرسي لم يكن مريحًا على الإطلاق، وجودة التصنيع كانت سيئة جدًا مما أدى إلى شعوري بالعديد من العيوب أثناء الاستخدام. مسند الظهر كان في زاوية غير مريحة تمامًا، وكانت الأرضية الصلبة تحت الجلد الصناعي تجعل الجلوس على الكرسي مؤلمًا. بالنظر إلى السعر الباهظ الذي دفعته 400 درهم، كنت أتوقع جودة أفضل بكثير. بالإجمال، لا أنصح بهذا المنتج على الإطلاق.

It is a tall and comfortable chair with big seat for people like me (6 feet tall and heavy). Cons: wheelbase is of a smaller chair so I am worried about stability and don't want to lean too much backward. Also the swing back lock seems cheap and loose.

No se queda fija al moverla hacia atrás