ORACAL631 Matte White Vinyl Roll 12 Inch x 6 Feet - Adhesive Backing

For the price you cannot beat this product. I have cut out several signs with this product and have never had an issue.10/22 I ordered this item again and there were tons of wrinkles in it. I tried to still use it and now my image has pilled making it very difficult to place. Don’t buy this product. The savings are not worth the frustration and poor product you will receive.

This vinyl is great for what I needed. It arrived when expected without any problems. It was packaged properly to avoid incurring any damage.I used this to make signs for a wedding that was being held in my back yard last weekend.This was used both as lettering on signs as well I also used it as a stencil for some signs. In my photos you may be able to tell which ones were painted (using this vinyl as the stencil) and which was just vinyl lettering.The small signs and the bottles were done using the vinyl as an applique, adhering it to the project. The large wooden sign I used this vinyl as the stencil, put the negative of the stencil on the the wood, then painted in the letters and removed the vinyl.The 631 is a little more removable if need be but I chose to use it on some applications as it was close by and I had enough to do so.This vinyl is perfect for both applications as far as I am concerned.It is very easy to use, and apply. I will certainly use this vinyl again. Very happy with this purchase!

I read other reviews for this vinyl that were very negative - complaining that it came with a sticker on it that ruined several inches of vinyl; it came only in a plastic envelope and was horribly wrinkled when it arrived;it was rolled so tightly etc., etc. But I really needed some 631 in white more quickly than I could receive it from other suppliers, so I ordered it.It came rolled very tightly and sent in a plastic envelope. It was in PERFECT condition! The sticker came off very easily with the tip of my Xacto knife and left no residue whatsoever! It was rolled so tightly that it became a hard tube and there was no damage at all to it. Of course one should expect to have to loosen the tight roll before it can be laid out to be cut - that's the way all the vinyl I've ever gotten in a roll has been.I think some of the negative comments came from people who are not experienced in vinyl and don't realize this is the way it comes.

Wrinkles, bubbles, won't lay flat. Cuts poorly. I think I managed to get most of my project cut, but I had to use Cricut removable I had on hand to finish. I wanted to feed on a roll feeder. Impossible. Would not feed into my machine easily. This might work ok if you want to waste a lot and cut into 12x12 pieces and cut on a mat. Even then, a lot will get ruined because of bubbling and refusal to lay flat. Even after weeding, it won't lay flat. I had to tape it to my craft table to apply transfer tape. Worst vinyl I have ever purchased. Picture shows large piece of Cricut (all white), and several pieces of this "Oracal" (blue backing) with transfer tape applied. Cricut brand lies flat. This "Oracal" curls even cut small with transfer tape applied. I've purchase a lot of vinyl, Cricut, Oracal, and other brands. I have NEVER had a piece this hard to work with. This absolutely MUST be extremely old product. IDK if my DIL will even get this applied. I may have to buy more and recut. It does not want to stick to the transfer tape.Would give zero stars if I could. My cut job should have taken 2 hours maximum. Took over 6.

Great product but why do you put the sticker on the vinyl?? It’s super sticky, hard to remove, leaves a residue on the vinyl, and ruins the first part of vinyl (the vinyl gets stretched out trying to remove the sticker).Besides that all is good, but I probably won’t order again due to the sticker issue.

The vinyl is awesome. Super easy to cut with my cricut,l and extremely easy to apply on to my wall. My walls have a slight texture to them, but the vinyl still adhered well. I also needed to remove and reposition a few decals and it was super easy to do so. I’d highly recommend this vinyl. The cricut vinyl I also purchased for this product was awful so I’ve actually repurchased more Oracle vinyl in a different color. Wish I would have just stuck with this brand in the first place.

Worked like a champ, first try. Did some 1" high lettering for my Great-grandaughter toy cut with my CNC, painted, removed the Oracal. Result was nice and clean!I have flip this photo and re-saved it in photoshop and still shows upside down???Sorry, it looks nice and the Oracal works great.

I bough this to make a sign for my cousins wedding. It was easy to work with and looks great. I’ve bought Oracal from other sells and haven’t always got the best quality, hard to cut, hard to peel and just a waste of time and money this was NOT the case with this seller.