NilightLed Pods 7 Inch 30W Super Slim Spot LED Light Bar Off Road Lights Driving Fog Lights with 16AWG Wiring Harness Kit-2 Leads for Van Camper Car Pickup Golf Cart ATV UTV SUV Truck Boat 4x4

Very easy plug and play kit. Extremely bright too!! Just put them on so we will see how long they last..30,000 hours seems far stretched, we will see. I highly recommend

Installed these on my boat .. Went from drawing 8amps per halogen on my old lights to a few hundred milliamperes .The light dispersion is very noticeable and no more hot spots that halogens project.So far two seasons and they work perfect !Very well made product regardless of the price . Several dock mates have ordered these since ..So if you have a boat and want to reduce battery drain , these are perfect for back deck lights ..

I have been looking for a spot light only. Not the combination spot, flood, fog light thing. Got these cuz they only said spot light. Awesome, these (mounted under my bumper) with my spot, flood, side shooter lights (mounted on my hood) is the combination. I can drive dark country road without any head lights at all and see just fine. Make you high beams a super bright white light and you will see EVERYTHING. only fault (my own) is with the side shooter lights on the hood… the right one shines right in my eyes, but a piece of black duct tape on the inside of each light fixes that.

There lights are great for the price. Don’t let your battery go below 12v though or the diodes burn out. It’s like that with all cheap lights this style. I suggest buying backups

Installed on my grom. Fit perfectly. Brackets were nice. Quality of the light and everything included has been quality has has held up to abuse and being left outside even through winter. I’d buy this exact one again if I ever needed another LED light install for any vehicle. Easy install and light was extremely bright

Using them as head lights for a go kart. They are bright and seem to be well built! Will be purchasing more of these in the future!

I was really excited to see a reasonably priced 30 Watt 6 inch LED bar. I was lured by the claimed 5 watt LEDs. Sadly the LEDs in these light bars are not 5 W LEDs. They can not be driven at 2.4 amps at 12 V. The LED driver is an OC5628 Built in MOS Switch Step-Down LED constant current driver which has a maximum regulated current of 1.2 A. At the regulated 12 volts that is just under 15 watts per 6 in bar. So although the lights are not generating the 30 watts I was hoping for, the lights are still bright.The construction is very good at this price point and upon inspection there is gasketing inside the device for water protection and intrusion. There is a gasket between the plexi-glass lens on the front and is sandwiched into place by the 8 front screws, in picture its white. There are also rubber gaskets on each end that are held tight to the body by three screws via end caps. The machining and coating are decent but there are some rough areas near the cutout for the power cords that could break the coating and start corroding. I have not permanently installed these onto a vehicle but have bench tested them. They draw about 1.4 amps each from the source and deliver at maximum 1.2 amps via 6 leds.The device comes with what appears to be stainless hardware and two similar coated mounting bracket heights. The taller mounting brackets can be mounted inward if you have a tight installation area. I took a picture of the mounting brackets mounted in so that you can see the space needed to mount. If you also ordered with a harness its a solid harness but if you are trying to use a more custom installation you may need to modify the harness. The fuses provided are 10 amp and 15 amp. Seems bigger than needed for a complete draw of 2.8 amps. Seems like a 5 watt fuse would be safer. Also the provided crimp on connectors are hard plastic and the ones on the harness are softer silicon or rubber. I would suggest using better crimp on connectors that the plastic ones provided.Bottom line if you need a small 6 inch light bar this is a good option, if you want the highest level of light output in this size look for a company who is using a True Osram 5W or Cree 5W LED package.

Installed these lights on my mower. Comes with everything you need for a quick install. Nice and bright too.