Hourleey 100FT Sewer Jetter Kit for Pressure Washer, Drain Cleaner Hose 1/4 Inch NPT, Orifice 4.0 Button Nose and Rotating Sewer Jetting Nozzle Spanner Tape Pearl Corsage Pin, 4000 PSI

So many pieces and all have great use.

جودته عالية وساعدني كثيراً

Good quality

PROFETIONAL AND USABL HIGLY RECOMENDED

La manguera funcionó a la perfección, me ayudó a liberar un atasco que no podía alcanzar con las varillas tradicionales.

Worked like a charm! Cleared out roots from a gutter down spout clay pipe. It also flushed out all the dirt and left the pipe clean. It was very rigid and flexible to work with and reasonably priced.

I had a clog in the main sewer line that I could hit with a snake, but not break loose. I started looking into these and bought this one because a lot of the others are made from thermoplastic and polyester. This one has an actual pvc coating over the thermoplastic. After reading reviews, the others seemed to have a higher risk of bursting or being too soft to push into the pipe. Some others are made with a steel braid, but that seemed like overkill for household use and pricing. I think this hose is a good middle ground. It was stiff enough to go 35' into my pipe without binding, folding or kinking and broke loose the blockage. I also noticed some others are bulky around the fitting area and some even have an extra rubber covering over the area where the connector is crimped to the hose making it really bulky. This hose has a nice slim design in that area. It worked amazingly and I am thankful I did not have to call a professional!If you have never done anything like this before, it is possible, you can do it, but you will never want to again! I had the foresight to assume there would be pressure in the line, so I made sure to stay to the side when I loosened the cap to access the pipe. I loosened it about 1/2 way and let the water drain out because if I had taken it all the way off, it would have gushed very violently. My pipe has a weird S going into the ground and I wanted to have a straight shot going into it so I used a taper drill bit and drilled a hole in the top of the pipe and ran the hose in. It did not snag on the S at all. My hubby operated the pressure washer from outside the house. You can push the hose in without water flow, but having that water flow makes it much easier, so I recommend having a buddy system for this. The way the backwash nozzle worked was awesome. It flushed back the clog as it was breaking through and I pulled the hose partially out to help wash it out then ran it back in. When I could feel I had hit the soild part of the clog, I let it sit and eat at it for a bit then pulled the hose back about a foot and rammed it in again. I had to work at it this way for about 30 minutes. I was getting backwash out of the open cap the entire time. All of a sudden, it sounded like a toilet flushed and I was no longer getting backwash. I broke through! I pulled the hose almost all the way out and ran it back through 2 more times to really clean it. I put a rubber plug in the hole I drilled and wrapped it with duct tape to keep it in place and put the cap back on. We filled up the washer and bathtub then drained it all at the same time. Success!I recommend wearing a dust mask if you have to be under your house like I did. It obviously won't help with the smell, but it can be surprisingly dusty. Wear old clothes and shoes you don't care to throw away afterward. Wear rubber/nitrite gloves under your work gloves to keep your hands dry. Wear goggles or at least safety glasses. You DO NOT want anything that comes out of that pipe in your eyes. Maybe some knee pads for crawling around. And have a strong stomach so you don't throw up in your mask. I truly wish you the best if you have to do this yourself. Plumbers are expensive, and they deserve every penny of it for having to take on jobs like this everyday!

Works good considering I don’t have a super high power pressure washer but definitely worked on my main drain system. Would recommend and buy again also great just to extend my range when using my pressure washer

We live in a valley with a really high water table. We also have a lot of oak trees and as a result a lot of chipmunk/squirrels.It’s extremely important that our gutters and French drains stay spic and span! When we bought our house I inherited an old pressure washer from family and kept things up.This past summer we found out that our neighbors drains interconnect with ours as there is one drain grandfathered into the storm sewer. On of their trap lids had come off and the main line started to run too slowly.Our old hose was just longer and didn’t have any special heads. I bought this as a triage step before having to call a contractor.Because the heads are small they navigated our tight turns really well. We were able to clear the blockage in minutes when previously my old hose took hours!I was seriously impressed!!! It saved me a lot of money on hiring someone.Weeks later my friend on the street ran into a similar problem. He also used it with great success. Definitely paid for itself in a day!!