ZOEGAA MacBook Pro 16 Screen Protector, MacBook Pro 16 Inch Screen Protector (2021-2024,M1,M2,M3,M4) Ultra-High Definition, Screen Protector Ultra-transparent for MacBook Pro 16.2 Inch

This screen protector is just barely big enough to fit over the 15.6 screen on my laptop. Meaning there is close to no room for error when putting this thing on. If you are off center just a little bit you will not cover the whole screen. The instructions (included book and video link) were really not much help as they don't even tell you how to use all the included materials but there are a set of stickers you can use to mark the edges of the screen so you're not struggling to see the edge as you put it on.It works great though and I'm happy with the product now that it is installed just not the ease of use.

I bought this for my new 16" MBP because I could not find any tempered glass ones available. Glad I got this one though instead as glass is probably too thick and may cause issues over time with your very expensive MBP (mine cost over $5k).What I like about this one is that: 1.) the surface feels completely smooth like glass, not like a cheaply made plastic screen protector, 2.) maybe more important, it has NO CUTOUTS!! (which is super rare) so it just looks way better when installed as it looks like the original screen (and no, it definitely doesn't affect your cameras or sensors at all), 3.) seems durable as it does not easily pick up scratches like cheap plastic screen protectors, and 4.) is not super reflective and does not seem to make the original screen more reflective at all.Keep in mind though that installation can be tricky. It is cut very close to the exact screen size so you will screw it up if you don't do it very carefully and align things perfectly. It's best to align the left side (which luckily is where the peel off tab is located) almost to the very edge of the screen, and then line up the bottom edge because that end needs to align perfectly so it doesn't go over the slightly raised bottom border. You want to peel off the backing film a few inches at a time and kind of push the screen protector onto the screen, lifting and reapplying if any air bubbles form (as it can be a pain to push out bubbles that are a good distance to the edge of the screen).If you keep doing this method all the way to the end you have a good chance to perfectly apply it as I did. If you see any bubbles formed by dust, then peel the protector back and then use the supplies stickers to pick up the dust speck off and reapply it. If you're patient and lucky (definitely wipe the screen with an alcohol wipe and don't apply it in a dusty room obviously) the you will hopefully install it properly.Only negatives are that, 1.) there is not enough protection in the packaging like you would see in a glass protector so that it can relatively easily get kinked in a spot (as Amazon often doesn't package these well) making it ruined. I had to return one of them due to this issue), and 2.) the cost is a bit high for a plastic and not glass screen protector.Overall though, I do feel that this is an A+++ quality screen protector and I would recommend it over every other one I've seen on Amazon (that are almost all notched, have a non smooth surface, or are tempered glass that is going to be too thick).

The product is great, very clear screen protector, great transparency and anti-glaring also loos pretty good so far. As a product, I give it a 5 star.Very good customer service. There is only one film in the mail and I messed up installing the first time due to dusty environment. I contacted the seller through Amazon's platform and they are kind enough to agree to send me a protector as a replacement. It arrived in less than two day as well.For those of you who are looking for a screen protector, I'd recommend this particular one for its quality and the customer service.

This is perfectly fit for the Mac Book 16 screen. The gap between the edge and the protector is almost invisible. Nobody is going to know I put a protector. I was looking for non-tempered glass, non-blue light cut, or non-anti-glare screen. Simple is the best. This is what I was looking for exactly. If you follow the instruction video on Amazon, it should be easy to put it on screen. I'm super impressed and satisfied with the result.

Everything else worked fine but when it came to putting on the screen protector, the top would not stick to my laptop. Got frustrated and threw away the whole thing and $30.

The media could not be loaded.  TIP : Watch the installation video a few times before installing. Took me a bit to get.The installation was relatively easy overall! I got the “transparent” version and genuinely I can’t tell it’s on. I’m tired of having to wipe off my Mac every time I use it to avoid my finger oils from literally disintegrating my screen. It’s a known issue with macs and I can’t believe I didn’t think to get one of these sooner!The ugly flashlight on the video is to show that even with someone who isn’t great at screen protectors, pretty much no air bubbles got in! I can’t find any!If you’re worried about the longevity of your screen, definitely get this.

I put this product on my touch screen in the car about an inch down from the top there was a small speck in there so I peeled it back took the specco and sealed it back down but now it has a discolored whitish look where I pulled it back. So make sure you put it on right the 1st time.

Exactly the product I was looking for my MacBook Pro 14 inch. I didn't want the tempered glass as it is too thick and Matte screen protectors mess with the screen clarity. The space between the keyboard and the screen is very small so the slimmer the screen protector the better. This screen protector is so slim I do not feel any thickness is added to the screen. I was able to do a speck free installation and it covers the entire screen edge to edge. Make sure your surrounding is clean when you prep the MacBook screen for install or specks of dust might creep in which will be harder to remove.

La presentación del producto es muy buena, se ve que tiene calidad quizá mejor que otras opciones.Sin embargo a la hora de instalar se presentan problemas, si no está milimétricamente bien alineada no va pegar de los bordes, además si se intenta corregir, comienza el problema de las burbujas y las partículas de polvo.Los adhesivos auxiliares que se incluyen no sirven como en las instrucciones para poder levantar la mica, por el contrario lo que levantan son la cubierta que se debe desprender para la aplicación definitiva!Aquí viene el problema cuando para corregir posición o intentar quitar las partículas de polvo hay que levantar la mica usando la uña lo que provoca que la grasa de los dedos impregne la parte adhesiva de la mica y esto se convierte en un segundo problema además de tratar de alinearla e intentar que no quede polvo ni burbujas.Es una tarea titánica y de muy alto riesgo que en mi opinión y con las mediocres instrucciones solamente puede ser realizada por alguien que ya tenga experiencia con numerosas aplicaciones además de ser necesario un entorno casi estéril para evitar las partículas de polvo normales en el aire.Al final logré aplicarla pero no quedó como esperaba y posiblemente en un futuro compre de nuevo una mica para que la coloque un profesional.Frustrante y decepcionado por la falta de instrucciones precisas o un video instructivo.