GTA-F Racing Cockpit | Silver Frame with Triple/Single Monitor Stand | Adjustable Leatherette Seat | Stable & Adjustable | Compatible with All Steering Wheels & Pedals for PC & Console

Let me start by saying I LOVE this setup. While it is not perfect, it is very close. Let me start with the cons: -Bolts missing for mounting the seat. No big deal because they are the same as the rest of the frame (more about that in a minute) -Monitors not close enough. I am running a single 27" monitor. While it is usable to be sure. I would like it closer. This is a minor issue because I use an Oculus Rift for my racing. -The picture shows that there is a shifter mount on both arms. This is not the case. There is only one, though it seems like you can put it on either side during assembly. -The welding. I am sure it is more that solid. See my further comments, but the tacks seem just a little sparse. I have not doubt it is solid, I just had to find SOMETHING to grumble about. For the pros: -This thing is SUBSTANTIAL!!! The steel tubing is thick. I bet you could park a car on it. -Very stable. It is rock solid when assembled. -Over engineered. Where anyone else would use a single bolt with a knob, this has 2 cap bolts,one on either side.. They are not small bolts either. Best guess they are M6. This is where I have the slightest concern about the welding. The thread spacers they use are only tacked in 2 places around the base. I would have liked to see a bit more complete job. -No bent tubing here. Everything is cut and mitered. The welding here is no issue. They look great. Conclusion: If I were building a race center for the public, I would use these seats. The price for value is off the chart. I will be doing a little custom modding (as I tend to do) to bring the monitors closer and make some sort of interchangeable controlled base. I do switch from racing to space to flight sims. I may even use it as a general workstation. This should be relatively easy again because everything is square tubing. Final thought... I could not be happier.

It looks a little taller in the pictures. Didn't think I was gonna have to get so low to get into the rig. But other than that solid rig for my DD moza r3. Very sturdy. I also could not mount my pedals anywhere on the pedal plate. Not matter where I put the pedals on the adjuster. Used a drill made slight modification and I couldn't be happier with this rig.

The materials used for the frame are very strong and sturdy. The instructions are the worst I have ever seen. Took me 90 minutes with no help to put it together. If the instructions were even close it would have only taken me 45 minutes or so. Overall great price for this product. It is well made and will last a long time.

As a whole, the set up seems very sturdy. I like that I can remove the sections and the entire set up for the tv and just be left with the racing set up. However, it comes in three large boxes that were delivered about two weeks apart. The instructions have no words and are only pictures. Honestly worse and harder to put together than Ikea furniture. We were missing two needed bolts, anther with the hand crank was broken off, we had had an extra random piece even though I know it was put together correctly, and a single random bolt that matched nothing else. It’s easy enough to adjust and the seat seems very well made, but durability wise, the sliders and hinges seem questionable over time. I’d buy it again, but I feel like 400 would have been a better price point

I read the prior reviews before purchasing and ended up getting it. There were complaints about the directions being non-helpful, confusing, etc. They may have updated the instructions(?), but I didn't find it hard. Took my 11yr old daughter and I about 45mins to put it together. And I took my time to make sure I did it right. In short, it's a great, comfortable, sturdy and nice looking kit. I bought the Logitech wheel set for my old PS4 and everything works well. I did have to buy the 100x100/200x200 adapter, because I ended up hanging a 40" TV on it. Overall, I love it. I use it more than I thought I would.

This is a very solid budget option to get into sim racing or flying. There are a few things I would like to point out that might influence your decision. Pros: Sturdy and weighs a ton. Well priced Everything is adjustable. Cons: The bottom part of the seat has no angle to it so it makes for a somewhat awkward position. Also the seat does not have any lumbar support The instructions are terrible and this took way longer than necessary to assemble. Using the triple monitor setup requires the use of screens that are too small. I use one 50” display which I find to be perfect. I would recommend this to people who still want a decent sim racing experience while not spending too much money. If you are very serious about Esports, sim racing or even flying then I would not recommend this just because it would be better to spend the extra money on a better cockpit.

Active sim racer here. I've done a ton of research on cockpits, both static and motion. I've had a Playseat in the past, built my own PVC cockpit. I had originally purchased another cockpit on Amazon here but when the time came for release and shipping, well, it never was shipped. Then got a notice that the shipping date would be 'when item was received'. Meaning, I had $500 tied up for nothing until God knows when. So I got a refund, did more research, talked with a friend who's also a sim racer and an owner of a GTR simulator. He highly recommend GTR. So I pulled the trigger once again and my seat was shipped out very soon after purchase. The big box arrived with no problems in the shipping. It was very well packaged. Several boxes inside the big box and ALL components were carefully bubble wrapped. I was actually surprised and very pleased. I got the triple monitor although I'm using the Oculus Rift. I have a 40" HD monitor and the two side monitor holders I'm using to hold my sensors and speakers. Which works out perfect. The structural design is great. It is extremely sturdy. No wiggling with this unit. The functional design, personally, I would have made some changes. Like a keyboard tray addition(swing away of course), work station platform under steering wheel, more incline in the foot pedals and a bit 'softer' or cushionee seat(hey, I'm 60 yrs old). I need more cushion that most folks. ;) But overall, I'm very well satisfied with my purchase. I highly recommend this sim seat and this company. Our charity, Racing Dreamz, will one day need another sim seat, I will get it from Abtivan Corp. Good people. :)

Instructions suck, but WTH, they are normally the first thing to throw out anyway. For my gaming, I needed to raise the seat, the monitor stand was way to far away, so I brought it closer, I made a CPU platform where the monitor stand used to mount and fabricated my shifter mount and other accessory mounts. Currently running 3 27" monitors. The angle on the 2 outboard monitor arms are too shallow (as mentioned before, about 30 degrees) so I will also make new outboard arms to support 34" monitors at about 40 degree or so. Seat is comfy and perfectly adjustable. No problems with shipping or packaging. All in all, well worth the price. If you can weld, even better, so you can customize to your needs.

3画面のシミュレーターを安く入手するにはこれしかありません。他のものは、倍ぐらいの値段です。 座面が少々柔らかすぎるのですが、座面を支えているバネの上に厚めの雑誌を入れると使い心地が抜群に良くなります（これは自己責任でお願いします）フレーム自体の剛性はこれで十分かと思います。黒いネジが飛び出るので、気になる人はキャップとかをつけた方が良いかもしれません。

Very sturdy and comfortable. Using a 32” monitor. Thank for the service. Will buy again

My grandson likes it. Good value for the money.

The product arrived within the time frame expected. Four of the parts where already assembled (incorrectly), possibly indicating that my new product that I paid over $700 for was previously in the hands of someone else. I was not able to start the assembly because of this issue. Contacted the company, and they IMMEDIATELY remedied the problem by sending me new parts. The condition of all the parts looked excellent, and the packaging it all arrived in, although minimal, sufficed. Assembly was aggravatingly difficult due to incorrect steps shown in the manual. But with patience and common sense, anyone, including myself can get through it. Neither the rig or the driving wheel (Thrustmaster T300RS GT) comes with mounting screws, for obvious reasons, so I had to do some research to find out that I need M6-12mm screws to mount the pedals. My wheel didn't line up with any of the holes so I had to use the clamp it came with. My monitor has M4 holes but the holes on the monitor mount are M6 holes. So I have to work all that out. So, if you buy this product I strongly suggest you find someone to help you assemble it. It's a two person job, if you want to eliminate the frustration. Make sure you bolt the seat railing to the frame BEFORE you bolt it to the seat. The manual gives you the wrong step, so I found out the hard way. Other wise, it is a solid product, and despite the original error the company dealt with my issue promptly.

Le banc est très bien La distance pour les pedal est parfait Assez solide pour un direct drive Par contre l'écran est trop loin et pas assez de place pour un shifter et handbreak Après quelque petite modification Il est 10 sur 10