Fly5D43pcs Paintless PDR Kit with Bag Pops a Dent Glue Pulling Tool

I turned into a snowbank last winter and put a dent in my door near the trim at the bottom. I thought this could pull it out as it was like someone just kneed the door. While this does pull out dents like that it didnt work totally. There must have been some metal stretch when the dent occurred, this wont fix that. Part of the dent did come out, but if you apply pressure to it the dent snaps back, like when I was trying to remove the glue(see con below).Pros:Probably would pull out some dentsComes with a lot of attachments that are usefulNot too expensive (esp if you are able to get that dent out)Cons:Dont pull too hard as the pad you stick will breakThe Pads dont stick to the Glue all the timeGlue is hard to removeIf the metal is stretched you cant fix that with thisTips:Be patient let the glue harden before trying to pull itDont snap the weight back too quickly as the plastic will snapI used a putty spreader to remove the glob of glue and then a cloth with a few drops of gas to remove the film that stays.If you have an older car with thick metal, dont bother buying this

Good product, pretty much all you need to pull dents. I did find the glue sticks very temperamental. Sometimes they remove easily, other times it's very frustrating picking the glue off with your nails. The hammer and tap work, you need to be very careful in order to avoid scratches or making the dent worse. Use a Polish after you're done and it will look better than before. I'm no professional, so my dents were 80% removed, but overall look much better than before.

Didnt remove the dent i bought the kit to remove. Have tried on multiple dents and it doesnt seem to want to stay on long enough to pull a dent. The glue is hopelessly weak and wont stay attached to the attachments. The slide puller is the best tool in this kit and the smaller puller doesnt go down very far so it makes it quite difficult to use.

Pour les gens manuel qui aiment que leur voiture ou frigo reste comme neuf, ce kit peut aider.

Price was reasonable, shipping was quick. It could have been better packaged...inventory list to ensure all bits were in the box would be an improvement the vendor could make. Have not tried it yet but looks like it should do the trick.