Titanium Alloy Fine Pencil Nibs Compatible with Wacom Pro Pen 2/3, No Wear Out Replacement Stainless Tips fits for WACOM Cinitq 16 DTK1660,Intuos Pro PTH660 /Cintiq Pro DTH2420,2 Pcs

I don't know if this is actually the case with others' experiences, but when I first got these nibs I also had the issue of them falling straight out and was very disappointed as I had very much wanted them to work. However! When I tried again I pressed a bit harder and it actually clicked into place! Now it's completely fine with no jostling, no looseness whatsoever.I also, personally, don't feel any concern for it causing any more wear to my tablet's surface (though I don't have one with a screen so ymmv) than the other plastic ones already have. There does seem to be a slight difference in feel but that could also just be me getting used to it and subconsciously light handed in concern over wear to my tablet.If anything changes however, I will be sure to update.Update for those curious:These have honestly been great and well worth the money. I would repeat the choice to go this route in a heartbeat; HOWEVER I do recommend using a film over the tablet to protect the surface.SO, two snafus; when turning the stylus from eraser to pen the nib has flown out twice, which was honestly surprising considering how it's never seemed loose otherwise, but I just found it on my lap and the floor beside me. Still so strange.The other thing is after months of use there did seem to be just enough wear into the 'screen protector' type film I got for my small Wacom from the nib that I had to replace the film because it was giving an odd texture that PERSONALLY I didn't care for. Honestly, no big deal. Still made this purchase well worth it.

The shaft is, indeed, too small and the nib will fall out of the pen. I put the tiniest piece of duct tape (really just a thread) around the bottom and that solved that.The nib itself is just as sensitive as any other. The feel is very different from the plastic nibs (I'm on a Wacom tablet, not a Cintiq or anything). It's not at all like pencil on paper or whatever the plastic nibs are supposed to simulate. It's much more like a really smooth ballpoint pen: I really like it.

As others are saying, the shaft of the nib is too thin and it does not fit inside of the pen. Sure, you could try and put a small piece of tape or paper inside to hold it in place, but you shouldn't have to. These are advertised as being able to fit inside the Pro pen 2 but they do not, a shame because as others have also said, it does flow nicely and seems to work otherwise. If the manufacturer just widened the shaft a bit, these would be great.

Works well with Pro Pen 2 and now that I have the new cintiq 16(2025) it works good with Pro Pen 3! Disclaimer on the Pro Pen 3: It will feel a little loose sometimes but what I do is just push it in gently whenever it feels loose!

Had it for a few days now and the metal nib has not worn down at all-- naturally, considering it's going up against a plastic surface, and I predict I may never need to use the spare nib.I do recommend anyone using this to lower the max pressure threshold on their tablet to 80-90%, as it seems the metal nib does wear and cut into the tablet's surface more easily if you apply too much force, regardless of the nib being smooth-- which makes sense since the it's metal...Brilliant product, truly; I'd give it 6 stars if a could.

This item does not fit properly into my Propen 2. Do not pick this up if you have this device.I purchased these nibs to replace my original ProPen 2 nib because Wacom no longer appears to support that pen. The nib technically functions well and provides the performance I am used to, but it constantly falls out while performing normal drawing motions. The shaft is likely too narrow to seat itself into the pen correctlyI will likely keep this item because there does not seem to be any OEM parts available for my pen in 2026, but I am not happy about it and would not recommend this to anyone else unless you have an older pen that is no longer supported by the manufacturer.

even when I was trying to use little pressure it made scratches in the plastic, but perhaps better technique would fix that

This is definitely a must buy. Especially for the paper feel screen protector i have for my tablet.

I had some difficulties to make it fit in the pen. But hopefully, I forced a little bit and it doesn't go away now.This product is amazing, I got a protection on my tablet that has grain, the thing is, it used to consume the plastics ones in only one day... And I was not even pushing much...But these ones are really good and does not let any marks on the screen. I am glad for the buying!

So far works good for my Intuos Pro Pen 2. Tablet is Intuos Pro paper edition 2017. Initially I wanted to use hard surface but it feel like standard smooth has a better feeling to it with this nib. Even though standard plastic nib is nice - it's an absolute stopper when it wears off within just a day.This nib had a perfect fit, no issues at all

Please check the fitting before the return date gets over, I checked it after a month the nibs don't fit my stylus. It slips out out of nowhere.

細すぎてガバガバで抜けて全くダメでした。レビュー見て当たり外れがあるのでヤバいかなとは思いましたが二本ともハズレとは…。なんとかマステを芯に巻き付けて太さを出して外れないようにはしてみましたが、こういうものじゃないよなぁと…。ちなみに薄いマステひと巻きで抜けないようにはなったので、エラー商品というより誤差なのだとは思いますが、安いものではないので残念でした。

The nibs just wouldn't stay in the stylus. I tried following advice from reviews, saying to really push till you hear a click. Nothing ever happened. In the end, I had to surround the nib with a thin layer of scotch tape for it to be thick enough to stay in the pen. I fear that comes the day I need that nib changed, the scotch tape will stay inside my stylus, and I'll have forever ruined the pen...Thankfully enough, sellers refunded me the purchase, but at what cost..