4pcs XT60 Plug Male Female Connector with Sheath Housing Connector with 150mm 12AWG Silicon Wire for RC Lipo Battery FPV Drone

I'm replacing the old unreliable connectors on my travel fridge with these. They hold together much better and the quality of conctruction is excellent.

I have built dozens of Electric bikes from conversion kits, the xt60 connects here come with a good length of wire leads allowing non soldering solution to matching up battery to motor controller connections. Most of the time I will have a battery with an xt60 supply connect and the motor controller will have some bullet connect and some dean or T connect. Either way I merely cut the motor controllers connects and ad these wonderful xt60s using inline non soldering crimp and screw connects. good shrink wrap or electrical tape. Allows me to keep the batteries in my bikes universal so I can swap out to increase range. No two builds are ever the same, but these keep it universal.

These are some #12awg fat boys, yet still flexible with insulation which is thicker than standard wire. I recommend this wire for use with 150C-250C burst rate batteries

Update: bought two more packs for other ebikes that I am building. They work great, never get warm under high stress. Easy to solder inline.Pretty thick wire on these. Seem secure. Connectors are of good quality. I am impressed so far!

I'm using these pigtails to connect a JauoPay 48V hub motor kit to a 52V battery. They work fine but they spark like crazy when connecting the battery to the hub motor. This isn't unique to these particular connectors but I will buy anti-spark versions in the future.

I got these XT60 connectors to make some charging cables for my batteries. The wire seems like is good quality. So far, I have not had any issues when charging my Lipos. They're easy to work with when soldering other connectors to the cables.Overall, I am happy with my purchase. Decent price, great quality. I would recommend to anyone looking to make battery charging cables, or for whatever other Rc needs you may have. My only gripe, if you want to call it that, is that I wished the cables were made of a thicker gauge, like 10AWG. My batteries require a lot of jiuce, and the less the recistance, the better the charging.

I used these to make an extension that converts from Anderson Power Pole to XT-60....Using 12awg wire for heavier current (30amp +).... VERY nice pigtails. Definitely recommended.

I used these to solder to a banana connector to create a power adapter plug. I have a battery charger that only accepts XT60 plugs as output power. I needed to create a power adapter using female banana plugs for my charging boards. These worked great for that. I've tested them a few times and they work fantastic.