3" Lift Kit for 1984-2001 Jeep Cherokee XJ 2WD/4WD - 670N2

Really happy with this 3" lift kit for my ’96 Jeep Cherokee XJ. Everything fit really well and the installation went smoothly. The 3" lift gives me plenty of clearance for my 31" tires without going overboard. The Jeep has a much better stance and looks great. Definitely a solid upgrade for the money. Very happy with the fit, clearance, and overall results! 5 stars! Highly recommended.

I installed my kit in about 2.5 hours. But I also had a shop lift to lift my Jeep with. I'm removed all but the longest leaf and buffed the rust from the contact points between them with a wire wheel grinder and applied some synthetic caliper grease at those points as well to minimize the possibility of squeaks. You will need to remove the sway bar links and use a spring compressor in order to install the front springs. I replaced my links at this time too. To get the track bar to bolt back to the right side you'll need to use a ratchet tie strap to drag the body to the right while the axle is dropped all the way down on jack stands to support the frame/suspension, or, purchase the adjustable track bar. Lubricate all contact points with synthetic grease too. This kit is really easy to install and an awesome kit for a low budget lift. My 260,000 mile suspension was worn out and the springs were collapsed at all 4 corners. I had an even 3+" at all 4 corners after completion and installed some 255/70/18 Duelers on 2007 O.E. Jeep wheels, replacing my 235/75/15 Wranglers and have no clearance issues at all. I did need to add hub adapters to go from a 4.5" to 5.0" wheel pattern to fit those wheels though.

Very simple install. Unbolt lower control arms and have someone stand on the brake rotor to push front end down and slide the coil spring in the front. Shocks are easy too. Only thing that I disliked was that it did not come with new u-bolts. To anyone using this, go to the nearest store or online and order some extended u bolts. Do not re use the old ones. But anyway, it gave the Jeep a good amount of lift and I trimmed my fenders and cut and folded the rear and I clear 33’s just fine. Very impressed with the price and quality of this lift.

Installed on my 92 xj Cherokee. Directions were pretty vague but installed in 5hours. You may need a spring compressor. Don't waste your time trying to install with the lower arms in. You have to get an alignment after. Seems a little stuff at first but seems to be settling after about 400miles. Overall great lift the springs are high quality and nicely painted (grey). Shocks are nice and I didn't install the rear add a leaf but plan to in the future. Don't forget to order shock boots for the shocks and a traction bar relocation bracket would be key to getting your alignment right. Also recommended is the steering stabilizer. You don't need extended brake lines.

Perfect fit and arrived very fast ,even arrived sooner than expected, fairly easy to install but I do have a lift and air tools , took my time installing it so it took about 4-5 hours, Only thing it did not come with was front sway bar links so I ordered some procomps of Amazon that are longer and take care of the angle issue for sway bar

PLEASE READ IF YOU ARE BUYING It took me all day with no power tools. Two stands and 1 jack , worked out great. You don't need anything els besides this kit. To make the 3 inch lift happen. All you need is a ratchet set and I strongly recommend using WD40/anti seize ON those rear upper shock bolts if they are rusty or even if they are not just do it! They snap easy if they are still factory shocks. I snapped all 4 of mine. I drilled right through them with a 1/4 drill bit and put new bolts w/ lock nuts on other side. Lift does not look that noticeable on picture or far, but you'll see a huge difference when you look at the new space between the tire and fender. Over all I love this lift and just orders 31s for it. now I can go wheeling with THE BOYSSSS

I put this lift on my 93 Cherokee the quality is great, the kit allowed me to run with 31 10.50s which gave me a total lift of about 5 and a half inches, installation was pretty easy but I used air tools but could still be done fairly easy with hand tools and a ratchet the only down side I found is you will need longer sway bar links or a sway bar drop brackets. Rough country also has a YouTube video of this lift being installed which is helpful and use p b blaster or wd40 on the rear shock bolts they can be stubborn and have a habit of breaking

Lift is ok for a budget option. 6 months later and the rear is already starting to sag though...

Great product and easy to install

easy to add. tough chore is getting the oe parts apart

Does what it’s supposed to. Ride quality was initially a little firm but once broken in it rides fairly decent.