CANE CREEK HEADSETS FORTY COMPLETE

As expected, this offering from Cane Creek is stellar in every way.The machining on these parts excel that of any offshore part I've encountered.The black powder coating is tough as nails.The bearings are gloriously smooth, with labels on the seals to make sure you can order the proper replacement.(That's assuming that anything could ever get past the tight fitting seals to hurt your bearings in the first place.)This is a conversion kit, so never again fear that you cant get an up-to-date fork, because your straight steerer will become tapered.If your headtube is the modern 1-1/8" diameter with an I.D. of 44mm, this is for you.The crown race seats well, and while it has no slot in it for easy install, a few taps with a rubber mallet will find it seated (and sealing better than the alternatives).At the price Amazon has for this overhaul headset, you have no excuse not to snag one.The install was easy enough that I did it (including cutting and fitting the fork) in around 90 minutes, with zero specialist tools.Tip 1: Grease the headtube before you try to fit these.Tip 2: Whether you have a Park Tools headcup press, or a long bolt and several washers (like I did), line these up and tap them into the bore squarely with a mallet, just for getting them started. It will change your life.Tip 3: Try this project yourself. If you can assemble a tube of grease, a mallet (any hammer other than steel works), a pipe the size of the crown race, a few nuts and bolts from the hardware store, and the wrenches to turn them, this is a DIY project, and you can spend that extra $75 you saved on the next tier of fork.Buy this if: you have a 44mm straight steerer tube, and you see how outdated they are becoming PLUS you enjoy very high quality parts at a decent price.Dont buy this if: you have an older 34mm straight steerer tube (still an 1-1/8" steerer tube, just less room for bearings), or you are looking to spend the most money for the least material (weight savings), in that case, it probably wont fit anyway, or you should be looking at CC 110 series.

Yeah, there are much better and higher cost headsets but I think this is the perfect price point and quality level. The CK and the bigger brother of this headset is way over engineered and you pay for that. Those aren't necessary unless you want the bling factor or ride under the sea. The 40 series has more than enough sealing for your everyday rides. Love this series.

Ooops, ordered by mistake. Before you order, double check to make sure you need a 41mm integrated headset.I actually needed a 44mm inner tube diameter headset and accidentally bought this 41mm by mistake.None the less, returning process was painless and ordered correct ZS44mm internal headset from Cane Creek.The build quality was top notch on this, and the seal seems like a great addition.

Used this to replace the 1-1/2" Straight Tube Suntour SR Coil Fork on my 2016 Giant Talon 3. I upgraded to a Suntour Raidon Air Fork with a 1-1/8" tapered tube. The EC40/44 worked perfectly for my needs and was easier to install than I thought after having viewed several YouTube videos.

Worked great! I needed 3 additional 0.25mm shim spacers to prevent the top cap from rubbing the head tube. Other then that I have no complaints!

The perfect solution if you want to fit conical suspension forks on your 1-1/8 straight steerer tube frame. It comes with a star nut and all the sealed bearings needed.Very smooth operation and lightweight. The external cup adds 1cm or so to the front bike height, changind the head angle a bit, making it a tad more slacker, which doesn't hurt at all or affect the bike handling characteristics.

This is the headset to convert your bike to a tapered fork from 1 1\8. This creates significantly more rigidity and opens your options to modern forks. This headset will probably require you to cut it to mount the bottom bearings flush. Don't let that cut deter your purchase as this is a phenomenal upgrade for your bike. There is a scored line on the bottom insert that if followed with a dremel or hacksaw will remove 3mm leaving 5mm behind. The normal depth of a headtube bearing seat. In my pics you will see the outcome along with the tools need to remove and install a headset...all that cost less than $10 to make..combined, outside of the dremel. Buy it!!!! You won't regret it!

This was the recommended headset for a frame I was building up. Needed the height so the tall was a good choice. Installation was simple, product is very well made with quality feel and finish. Completely smooth and perdictable behaviour on the bike.

Purchased for my GT Avalanche 2.0 after lots of research. Was still unsure until I installed it. It fits perfectly and I was able to use a tapered fox float fork. My old headset and fork were straight 1 1/8. I had grease the race and tap it into the fork. Some hairspray and a wood block with a hammer carefully tapped the headset in. Looking back, although it worked, I was lucky not to bend the headset. I'd recommend taking it to your LBS to install carefully with a headset press tool.The headset itself is AMAZING. Buttery smooth. I never thought anything good or bad about the old headset I had until I saw and installed this one. It's fancy. Nice engineering. Who would have thought.I recommend the 40 series to anyone looking for a good headset.Make sure you read the specs and measure your frame with the old headset out.

Converted straight fork frame to take a tapered long travel air forks for mountain bike. Once it was rubber malleted into place it is solid and works a treat. Very smooth and excellent quality.

Sehr passgenaues und robustes Teil. Ein Stern Abzug da sich die Imbusschraube schnell ausgenudelt hat, aber sowas sollte jeder Schrauber rumliegen haben.

ein günstiger Steuersatz mit sehr guter Funktion, passt defekt zum Carbon Mtb-Rahmen. Die gute Verarbeitung und das geringe Gewicht sind eine Empfehlung wert.

You can get better bearings for a quarter of the price, this whole piece is very hard to put into the steerer and will require a press.