ErGear Height Adjustable Electric Standing Desk, 63 x 28 Inches Sit Stand up Desk, Memory Computer Home Office Desk, Black

I’ll start by saying a riser desk is a health requirement! After 3 years of sitting and working from home I developed a SEVERE case of sciatic pain and probably some nerve damage. I started going in the office once a week and started standing with my office riser desk. Although it was a little uncomfortable standing I stood for about 4 hours and the pain became less uncomfortable. Sitting forces everyone to lean forward which puts a lot of strain on your back and neck. I have an office set up downstairs with an executive desk so the days the sciatic pain was too bad I wanted/needed something upstairs. This riser desk is perfect in many ways: it rises higher than I expected (definitely higher than the one in my office), probably goes lower than I need, has 3 self-programmable settings, is easy to assemble, has storage hooks on both sides of the desk, a cable management “tray” and is a third of the price for a similar riser desk at a brick and mortar store. As for assembly. The box and packaging was perfect with lots of foam cushioning so nothing was dented or damaged. The instructions were clear where it was needed and the illustrations were large so I didn’t accidentally connect anything in the wrong direction. There was even a business sized card with a QR code to watch an installation video. I didn’t use it or need it so I can’t really comment on that. The desktop comes in 2 sections, but it appears that the way you install it makes it very sturdy. It says the desktop will hold 176 pounds. The one advice I’ll add is it say to use a screwdriver or drill for assembling the top. The holes are tight so if using a screwdriver make sure the Phillips end isn’t chipped. You’ll also need a good grip and strong wrist. Yup, it’s that tight!!! Because I have nerve damage I started with the screwdriver and finished it with a screwdriver drill - an electric screwdriver doesn’t have enough torque to do this job. The 2 center screws by the legs you may need to use only a screwdriver as it’s hard to get a drill in there. Also it’s almost impossible to mess up the screw heads with a drill, but make sure you the correct sized screwdriver bit to get a good “bite” on the screw. I set mine up by myself in about 45 minutes. This desk comes in multiple sizes and colors so you cannot go wrong on a pick unless your spouse tells you that you picked the wrong color. Just had to take another glance at mine. LOL Not much else to add except I would recommend getting a drafting stool for health reasons and for easier transitioning from sitting to standing and an anti-fatigue mat to stand on. Hope this helps anyone reading it. I’ll add some pictures after I order some additional monitors and set up my new desk.

I just received the desk and it took me about 40 mins to put it together on my own. Instructions were cleared and all the parts were there. It feels very good quality and its stable! Its super spacious, I have two monitors plus my laptop and I still have room for more things. I love that you can save your height set up! Makes it easier to go up and down.

I bought this desk specifically for my Cricut station, and it's been exactly what I was hoping for. The 48" x 24" size gives me enough room for my Cricut, mat, and the projects I'm working on without taking up a huge amount of space. The height adjustment is smooth, and being able to switch between sitting and standing is a nice bonus during longer crafting sessions. Assembly was straightforward, and the desk feels sturdy once everything is put together. The white finish also looks clean and bright, which fits really well in my craft space. If you're looking for an affordable standing desk for crafting, a Cricut setup, or a small home office, I'd definitely recommend this one.

I'm loving this height-adjustable desk for its simplicity of design, perfect size, and smooth operation. The desk offers a sturdy and stable platform for my computer and accessories. Especially nice is the 4-preset button command center, which allows you to pre-set your desk to four different heights to include standing or sitting positions. The assembly was not particularly difficult, but care needs to be taken to insert the parts in the right places. The adjustable height allows me to dial in my comfort zone to the millimeter. There is no wobble on this desk, and it operates smoothly without any fear of things falling off the surface. One thing to keep in mind is cable management. As a desk that can change heights, you need to make sure that items on your desk have enough cable slack so when you extend the height, they don't get pulled off the surface top. One thing I was disappointed with is that the desk surface is made of particle board, which tends to chip and fray at the edges, especially in the front where you mostly rub against it with your arms or body. I found a third-party solution with a metal IKEA desk mat that perfectly covers the edge of this desk and makes the whole thing solid. I have been very happy with this purchase, and for the price, it cannot be beat! Other tables in this range are much more expensive. Additional features include headphone and purse hooks, which help keep things a bit tidy. The legs are metal and solid. Taking one star away due to the easily damaged top surface – thankfully, I was able to correct this with the IKEA desktop cover.

I am in love with this desk! I recently started a remote job and wanted a simple stand up desk. It was time consuming but easy to assemble thanks to the clear picture instructions. It is very sturdy & holds my 2 monitors, a laptop, docking station, keyboard & mouse perfectly fine. But my favorite part is the stand up feature!! This desk is so simple to change from sitting to standing. The electronics are simple to use and sturdy, so I know my equipment is safe while the desk moves up and down. It also moves up & down at the perfect speed. It’s not too fast or too slow. I absolutely love it! I’d recommend this desk to anyone looking for a simple yet sturdy stand up desk. I am very pleased with it!

This desk has been gray over the last five years. It’s pretty durable, but if you’re moving, definitely take the time to take it apart, even if only removing the legs. However, if it does break the company behind, it is amazing over the years they have sent me multiple parts. No questions asked! Make sure you register it for the warranty. I was able to put this together pretty quickly by myself with a small power drill. (I felt so accomplished.) it’s not too big. In fact I wish I would’ve gone a little bigger but the comfort level and the alignment is perfect. I got the color black and the appearance is great. Around year three there were some issues adjusting it. (this was probably my fault.) but the company sent me a new piece and it’s perfect again!

Title: Still works perfectly after a year! I bought this desk about a year ago and it has been amazing. I use it regularly and it still goes up and down perfectly, just like when I first got it. The motor works smoothly, the desk feels sturdy, and I haven’t had any issues with it. I’m very happy with the quality and would definitely recommend it!

I have had this standing desk for roughly 1 and half years, am still currently using it, and have enjoyed it. This standing desk is quite stable and holds a lot of weight. I currently have 3 monitors mounted near the back of the desk and a medium sized computer mounted on the side of the desk (probably comes out to around 50 pounds) which are all easily lifted by the motor, although it is a tiny bit noisy, but won't really matter if you don't move it every 10 seconds. This thing lifts the desk top with ease. The height goes up well above a standard standing height and goes down to a lowered chair level, so it's height is very adjustable. Building the desk also didn't take very long, so getting this thing up and running shouldn't be too big of a deal. I did like the fact that the desk came with some cable guides to route the cables for the motor and interface. The interface is also very easy to use and has 4 different presets for heights you want to save. There were 2 things I wasn't too happy about which is why it's getting a 4 star though. Number 1, the desk top is in 2 pieces and gets assembled when you build it, which is fine because it makes the shipping easier, but still would've liked to have 1 solid top. Number 2, the desk can be a little bit wobbly (mostly at higher heights), mainly because there are only 2 points of contact for the feet/legs instead of 4. I could just be nitpicking though and you may not care that much. At the time of this review the desk is around $150 USD which is really nothing to complain about especially with all it offers. Overall the desk is a great buy especially for the price and I would recommend it for anyone that wants to get a standing desk without having to fork out a bunch of money for it.

Oh my god the screws are so bad ! Almost impossible to make a clean build without an electronic screwdriver. Anyways I damaged them all in the process so it will be a single use table. I don’t recommend.

I needed a small, compact desk to fit into a cubby hole for working from home, and I also wanted the option of a standing desk without spending a fortune. After seeing generally good reviews, I decided to take a chance on this one, despite a few comments about assembly and stability concerns. Assembly Assembly was surprisingly straightforward. My partner and I are both not particularly handy with DIY, but we managed it in around an hour. Instructions were clear enough and it was mostly just a lot of screws. We didn’t use a power drill, even though it was suggested, and it was still totally fine to build by hand. Build and design One thing mentioned in other reviews is the join in the desktop (as it comes in two pieces). Yes, you can faintly see the line if you look closely, but in my opinion it’s a non-issue and doesn’t affect use or appearance day to day. The size is perfect for what I needed. It comfortably fits both my PC monitor and laptop, even though I went for the smaller version. Electric standing function The electric height adjustment is very easy to use. It runs smoothly and quietly, and the height range is more than enough for me at 5'7", with plenty of extra room for someone taller as well. Stability It feels solid in normal use. There is a very slight wobble if you’re typing quite aggressively, but nothing distracting or concerning. I wouldn’t lean heavily on it, but for everyday working it feels stable and reliable. Overall I’ve only been using it for a couple of weeks, but so far I’m genuinely impressed. Easy setup, good functionality, and great value for the price. Would definitely recommend if you want a compact standing desk without spending a lot.

Mycket nöjd och absolut prisvärd.

Very easy to setup and sturdy.

As a person always sitting on the table and chair using your laptop this table is very helpful when you wish to move a little bit. I always used the simple table but that causes me yo sit long days due to My job but from the day I ordered this I feel amazing whenever I feel like getting up and move my legs a bit I just click a button and it gets adjusted to height I set at the beginning due to it memory save. I loved it. The assembly is very simple. I placed most of the parts myself it was only when I required the help when I have to add two wooden planks together to make a big full table. I love the color and pattern as well