Avantree Aluminum and Silicone Desk Headphone Stand Hanger with Cable

My latest headphones have the ear pads touching each other when they are at rest. Using my existing headphone stands, or getting a headphone stand with a central post was not an option as I didn't want the ear pads clamping around the post. For this reason, I also did not want those 'head' shaped wooden stands - they look good, but do nothing other than compress and reduce the life of your ear pads. This stand has a silicone top pad that is probably one of the best materials you can have that limits any damage or scratches to your headphone band/strap. Unfortunately it is only 40mm wide (actually only 38mm usable depth) - therefore it might be too narrow to accommodate wider leather head straps (like the one on my SIVGA headphones), but it perfectly accomadates the alluminium head band. This silicone top pad is also the only one on the market (that I could find) that is FLAT across the narrow (depth) section. However, the curve across the wide section of the silicone top holder also compliments the curve of most head bands and distributes the weight much better than narrower holders. My only wish is that this stand was just a couple of cm taller. My headphones (with cables) just about clear the bottom tray - but I acknowledge these headphones have above average sized cups. Should be OK for 99% of headphones or 100% of headphones without an adjustable leather support strap. At £19, I think it's great value and I genuinely would've had to spend in excess of £120 to get an improvement on this stand!

Clean design with proper weight—doesn’t tip or wobble, even with heavier over-ear headphones. Aluminum frame looks sharp and feels premium, not cheap plastic. Cable holder underneath keeps things tidy—no more trailing wires across the desk. Used it for daily drivers and backup sets—fits most headbands without stretching or slipping. Assembly’s quick, no tools needed, and it frees up space while keeping gear ready to grab. If you want a stand that’s functional and looks the part, this one’s a solid pick.

I’m over the moon This is probably one of the best things I’ve ever purchased. It is made of such beautiful materials silicone and metal and it’s so sturdy and looks totally in place with the headphones attached 10/10 for such a great product speedy delivery and wonderful price

Avantree HS102 Solid Steel Headphone Stand Headset Holder Hanger, Sturdy with Space for Cable, Great for Sennheiser, Sony, Audio-Technica, Bose, Shure, AKG, Panasonic Headphones and more Getting this stand and putting it together was easy the rubber bottom and top were wiggled into the correct grooves, I would of liked so more secure way of putting these on like if they clipped or clicked into play but they were still mostly secure in place. All of my headphones went into place easily and the cables could neatly go away in the bottom however its rare that I used it like that as the headphones are always plugged in. The only other problem I found with this product is that with the headphones on it can be quite top heavy and easy to knock over so I needed to put some weights in the bottom to balance it out, other than that it was a nice stylish addition to my desk and also a practical one.

Easy to assemble in less than a minute. I wanted a stand that allowed the ear cups to hang naturally rather then rest against a center pillar. This does the job perfectly and has a small tray to boot to store your adaptors and the like. Very good quality materials, looks good too.

Quality stand that is easy to assemble and looks really good holding a set of headphones. The base looks good and is reasonably supportive, but it will go over if you nudge it too hard. I have a set of Focal Clear MG on it. The band doesn’t fit between the ridges but the softness of the top holds it without any problems and there are no indentations. I would say that the heavier the phones the better. All in all a good value item that shows off your headphones well.

Was look around for a suitable stand for my headphones and this seemed like the best option.Strong and sturdy stand. Well built, lightweight and easy to assemble. A little on the expensive side for what it is but it is made of good quality and seems built to last. Offers good protection for my headphones which are a little on the heavy side. Plus my other headphones fold up and can be easily stored in the base so I have more space to store my headphones and not have them clutter up the place so I always know where they are and do not take up too much space. No complaints from me and they serve their purpose. Never used this company before but a good quality stand nonetheless.

Nice piece of kit.. Just the simplest idea right out of the box.. No fuss..

おしゃれでカッコよかった〜！ ゴムなので、埃がつきやすいです💦

Her Boy kulaklığa uygun ve kaliteli malzeme ile kulaklık dostu

Simple yet amazing headset stand. 5 star product.

Space age headphone stand? Pretty much, but with a touch of elegance and highly functional. What I mean by that is if you have wireless headphones with a detachable cable then the Avantree headphone stand is a great buy. The top of the stand provides great versatility from a wide range of headphones/headsets. I currently have the Logitech G633 Spectrum sitting on top of my Avantree, situated on a transparent glass desk. What I appreciate is I can leave the headphones at their enclosed width without needing to expand them to fit the stand, and if you've never seen the G633 they are pretty massive headphones! The base of the stand is where functionality comes in. It's a great place to put your headphone cables that is easily accessible. I will say that if you have embedded cables (not detachable) then you may not want to go with this stand unless your headphones are very deep and leave minimal space between your headphones and the base. Why should you consider this? I believe the main selling point of this stand is: #1. Reduce clunky headphone placement on your desk #2. Provide a stand for your headphone If you have cables from your headphones that are crinkled and not properly tethered, then you basically have a stand similar to a messy hair day. Not very pleasing to look at. The silicon top and base provide great scratch protection for those concerned about the physical condition of your headphones/headsets. Steel construction of the stand ensures that your headphones won't be flopping around which is great as some people may not have a supportive desk underneath. Assembly was very easy, however the silicon padding for the bottom of the stand did worry me at first as it was not making 100% contact with the stand. After a few seconds of wiggling around I managed to secure the silicon base to the stand and attempted to knock down the stand with gentle force applied to the left and right of the stand. Good news, it didn't go down! So should you buy these? If you have detachable cables sure, if not then you may want to measure your headphones and see if they create a 1"-2" gap from the full 9.84" height of the stand. Another option is to tether your cable thoroughly so it's smooth texture wraps around the base of the stand. Thanks for reading!

La verdad, me agradó mucho ya que su diseño es simple y de buena estetica. La base y soporte donde reposan los audífonos son de silicona pero se nota que es de muy buena calidad ya que no se le pega el polvo. La silicona es flexible pero esto no afecta la estabilidad y rigidez del soporte al poner los audífonos.