F80

Im not big on review writing but imma leave a positive note for this. I bought this as part of a full gamer desk redesign after using a screen further from desk. When the screen broke i decided to get a smaller monitor and do a full desk make over in the process. I game on a performance laptop so standard monitor stand wasnt gonna cut it. With so many brands of arm, i relied on reviews for this purchase, finding equally bad and good. I cant compare any others here but i give this NB arm a really good experience. Firstly, being a technological idiot, simply being able to assemble this = 5*user friendly rating. It was daunting seeing lots of screws and stuff but thata only for the drilling desk method. The clamp itself is ample strong enough for my basic IKEA desk and 24” monitor. The arm parts slot easily in together. 4 screws easily mount monitor into the VESA thingy. My only issues were the stiffness of the joints…. Or figuring how to loosen and tighten. This is easy to do with the allan keys provided HOWEVER. Two main problems i found were: 1) the stiffness of the portrait/landscape screen rotation. I nearly sent it back thinking it was faulty because it was so stiff. After much force and tries it finally un-stucked and while still stiff it does work. 2) the bolt to loosen and tighten the tension of the main middle arm joint was almost hidden. When i couldnt raise or lower the main forearm because to was taut i saw the bolt but it was partially blocked by the body. It took several tiny turns tweezing the alan key into the gap to loosen. VERDICT: 4.9*. Really really good once mounted and set up. Super strong and adaptable to your position and holds this monitor firmly in place without movement unless i command it to. After a few days gaming ive tightened this to its set position now for optimum gameplay. Top notch

Incredible value for money and solid arm. I purchased two other brands arms that were over twice the price of this and both had issues. This arm is solid metal, very sturdy, and has absolutely no wobble at all. The movement is fluid and can be adjusted easily with an Allen key as needed. The cable management is pretty basic, but given it sits behind the monitor anyway that is not an issue - it hides the cables just fine. Highly recommended.

Screen arm works great, build quality is great, has good travel and is very easy to setup. I have a 32 inch monitor on mine so it's no slouch either. Perfectly happy with this so far.

Great for 27" monitor. Works really well. Not too stiff. Cable management is a bit less good. Plastic cable holders looks cheapo, and too stiff for a thick DP cable. Spend couple of minutes trying to push it through the gap. On some monitors power cable can also be equally thick. Seems to be good for the price. 4 stars just because of the cable management issues. If you have a table with frame, don't worry, clamp will work if you use some wooden block, like the one or two from jango or wooden railroad.

Great arm, feels sturdy

This monitor arm is fantastic! Assembly took barely 15 minutes — it’s super simple, with just the two arms connecting to the monitor and the already attached VESA plate. Once set up, the movement is incredibly smooth and fluid, making it easy to adjust to any position for the most comfortable viewing angle. The build quality feels solid, and the range of motion is excellent. For the price, this is an outstanding product — highly recommend!

This is my first monitor arm and Bayou did not disappoint. Although I used the clamp fixing, it was fixed down well enough for all sort of swings and turns without any issues. I only used a small 27 inch monitor so this arm was more than capable.

I am blown away by the price-to-quality ratio of this monitor arm. It feels incredibly sturdy and holds my monitor perfectly. The gas spring movement is smooth and easy to adjust. I liked it so much that I am 100% going to order another one for my dual monitor setup. Don't hesitate, just buy it!

The item was delivered in less than 16 hours! It came with the fittings for both a grommet or an edge clamp. I went with the grommet. Installation was quick and easy with two gotchas - both not the fault of the item. The grommet diameter on my table was too large. I had to conjure up a wooden strip And drill a hole through it to fit correctly. Secondly, the instructions are just too tiny for my eyes so it took a bit of squinting to figure them out. Once installed, I had to tighten up the tension to hold my monitor down - as it kept spring back up to its maximum height. But that was documented in the instructions clearly. So, the mount is installed and the desk is free of clutter, and the monitor suspended mid air is quite stable. Good buy. Especially for the price!

Good for the price Looks pretty solid and the springs are good too. It's not too heavy and the materials are made of steel for the important part then plastic all the rest. The cable management not the best but do the job

⭐️⭐️⭐️⭐️⭐️ **Fantastic Monitor Mount** The NB North Bayou Monitor Mount is sturdy, smooth to adjust, and easy to install. It holds my screen securely and lets me position it exactly how I want with no wobble. Great build quality and value, highly recommend!!!

He comprado este soporte, porque el que viene con mi monitor es muy grande y me quita espacio para el teclado, con este he conseguido tener la mesa muy despejada. Nada más desenvolverlo se ve bien construido, y da confianza, por cierto si lo compráis, cuando lo desembaléis cuidado al retirar el velcro puesto que se despliega rápidamente por la acción del gas y puede golpearos la cara si lo tenéis cerca. Viene montado, de lo único que hay que preocuparse es de elegir que sistema de anclaje se quiere utilizar el del agujero a la mesa, o el de la pinza desde una esquina de la mesa, en mi caso, retiré los componentes de ambos sistemas de fijación y atornille directamente el soporte sobre la pared y ha quedado de cine. La maniobrabilidad del monitor una vez acoplado es una pasada se sitúa a la altura deseada sólo con un dedo, tiene una gran inclinación tanto hacia delante como hacia atrás, y el brazo se pliega fácilmente con dos manos, también se puede voltear el monitor en ambos sentidos quedando fijado en cualquier posición en cuanto no se le aplica fuerza. Tiene un sistema para ocultar los cables al que se logra acceder retirando 2 tapas mediante una llave de allen especial que se incluye, yo no lo he utilizado de momento porque tengo que hacerle un agujero a la mesa para pasar los cables primero. Una cosilla si cuando lo instalas observas que a cierta altura el peso del monitor vence al soporte, en este caso hay que apretar un poco el tornillo "central" del brazo (situado en lo que es el codo) con la citada llave de allen. La única pega que le veo es que las instrucciones sólo están en Inglés, Francés y Chino. Considero que ha sido una buena inversión los 30 euros que me han costado, lo recomiendo para el que quiera ganar espacio en la mesa, o el que tenga el típico soporte que se queda muy bajito. Saludos.

Son ABSOLUTELY LOVES this bracket