Question 1

I received the 50ml bottle is not even has half the content inside. Is this right or should it be full bottle?

Accepted Answer

Being a past Loctite adhesive specialist, anaerobic adhesives cure in the absence of air.  Filling the bottle would shorten the shelf life because of no air around the product.  Also, the bottle is made of an air permiable plastic.  This why old bottles get sticky, the product is weeping through the pore's of the bottle.  50 and 250 ml bottles are not round and are flat by design to discourage any curing of the product in the center of the liquid inside the bottle.  Anaerobic adhesives cure upon assembly and do not air dry, this why any liquid product should be wiped away from the completely assembly because in the liquid state it will craze painted surfaces.  Half filled bottles are very normal.  You can dump the product out in to a measuring cup to verify the amount but you will find you are not getting ripped off.  It all about packaging.

Question 2

I was examining  some spilled M-243 and it is still gummy after two weeks. Is this normal or should it be hard to the touch?

Accepted Answer

This is normal M-243 is like a light glue to hold the screw or bolt in place like pipe tape is for a watertight seal. I use it after cleaning my hunting rifle on the screws during the re-assembly process.
Hope this helps.

Question 3

can I use this on a .125 inch set screw?

Accepted Answer

Yes. M-243 can be used on a 1/8 set screw. If possible, apply the threadlocker to both male and female threads before installing the set screw.

Question 4

Does this prevent seizing and galling? (anti-seizing)

Accepted Answer

To the best of my knowledge, seizing and galling occur when two surfaces are rubbing against each other (by design e.g. shaft and bushing), but for some reason (e.g. lack of lubrication) will eventually destroy each other (causing seizing and galling). So I don't think this will help prevent seizing and galling in that sense as it would not be used as a lubricant. It is possible that it prevents corrosion in certain materials e.g. steel bolts and nuts. But that needs to be verified.

ASIN	B09SLRN9MV
Best Sellers Rank	#94,803 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #382 in Hardware Nuts & Bolts
Brand Name	ESKONKE
Color	Blue
Compatible Material	Metal/ Stainless Steel/ Aluminum/ Copper/ Alloy Steel
Container Type	Bottle
Customer Reviews	4.5 4.5 out of 5 stars (280)
Full Cure Time	24 Hours
Included Components	Liquid
Item Form	Liquid
Item Package Quantity	1
Item Weight	60 Grams
Manufacturer	ESKONKE
Material Type	Epoxy Acrylate(60-65%) / Oleic acid, ethoxylated(25-30%)
Model	243
Number of Pieces	1
Other Special Features of the Product	Anaerobic adhesive, blue thread locker 243, metal glue, thread lock nuts bolts, thread locker 243
Part Number	TL21-S002R
Specific Uses For Product	Lock Tight Fasteners, Lock Tight Nuts Bolts, Seal Fasteners
Tensile Strength	180 Pounds Per Square Inch
UPC	788462034992
Unit Count	1.69 Fluid Ounces
Viscosity Level	Medium to High
Volume	1.69 Fluid Ounces
Water Resistance Level	Water Resistant

ESKONKE Blue Thread Locker 243 Nuts & Bolts Locker Medium Strength Removable 1.69 Fl oz/50 ml Threadlocker Lock Tight & Seal Fasteners Anaerobic Curing Metal Glue (243)

Details

Details

Description

Specifications

Common Questions