Holts Cataloy Car Body Filler, Knifing Putty To Fill Scratches & Stone Chips, Durable & Easy To Use Car Filler, Ideal For All Exterior Bodywork With A Perfectly Smooth Finish, Applicator Included 100g

Easy to use. No mixing needed

Not the best instructions. Applied first coat & sanded, noticed I had sanded in the same direction of the scratches also applied in the same direction so have now applied at about 45 degree angle, will do the same with the sanding, softly. bought the "Wet and Dry Sandpaper 1000 1200 1500 2000 2500 3000 5000 7000 10000" , started with the finest went to the 1200, then reapplied the filler. I am allowing 24 hrs before doing any sanding. Most important not to fill large scratches in line, same as sanding. Yes it works well, bonding to the Zafira paint, primer very well. The Zafira (09) has great paint work, on the body, pity they did not do the same with the under body. It is not bad for 09 plate but could have been better. Watch this space

ITS GOOD AND DUZE THE JOB

Easy to apply and sand, good for small scratches and dents.

Use it sparingly as it will lift the paint beneath …it’s best smeared on but note that it’s tough to sand back and hardening times vary…best warmed in hot water as it’s takes an age to get out of the tube …and don’t use on plastics

This filler is brilliant! I use it to join 3D printed section of RC model U Boat hulls. It sets quickly and is a doddle to sand by hand. The photo shows a 67in long U-boat I 3D printed in 12 sections. This filled the joints and sanded so smooth. Gone through 5 tubes on various projects. No hardener required so no mixing or worry about the right ratios. Just spread it on, wait a short while, sand and paint! Good price too. Just bought more to keep as spare.

Does what it says on the box

This is the stuff for filling very shallow imperfections. Wet and dry it and after painting you won't know it's there.