FTP004 Swivel Seat Base Compatible with Ford Transit 150 250 350 2014-2021- 360° RV Seat Turntable Base Right Passenger Side

I modified this to weld onto a Astro van seat base. Fits great for that. It didn’t rotate very well initially but I took it apart, sanded the friction parts, lubed them up and adjusted the bolt tension. Works much better now.

Installing was straight forward and did not take long. (Before you start removing the seat, if you have sensors connected to the seat, disconnect the battery - save time and use the quick release next to the gas pedal (vids on YouTube) saves time from having to open the battery compartment. The swivel profile is low and doesn't add much to the seat height. It's stiff and a bit hard to turn, hopefully it will loosen up with use. Only issue is the plastic side cover will catch on the base/swivel when turning, you'll need to adjust the chair a few times to spin it around. (I'm going to cut off the bottom of the panel to reduce the need to make so many adjustments before & after). But, I definitely recommend considering the cost of other name brand options. 👍🏼

This doesn't come with instructions but you can find a tutorials on youtube if you want to see how it's done first, though it wont be for this brand. I included my installation process with my review. I have a 2016 Transit. BUY YOUR OWN NUTS the ones provided are lock nuts and i didnt feel like dealing with them. M8x 1.25 or something Is what I got but check. my review: Cons to my experience: Turning it is harder than it really should be. and one of the holes i was supposed to use did not fully match. It was off enough that I couldnt get the bolt in all the way as shown in the video and in a picture. This is a manufacturing defect, but probably not be a problem on every swivel based on the other reviews. I just got bad luck apparently, but it wasnt enough to return it since I can open the hole a bit and get the bolt to set correctly. This slight offset does inhibit the seat's tracks enough that currently it only moves forward or back about an inch. A tall price to pay for a swivel. I'm pretty confident I can fix it but it is annoying to have to remedy the manufacturer's mistake, but you get what you pay for. Not providing instructions is always a con of course. Pros: It's cheap and functions. You can install it in under an hour by yourself. doesn't add too much seat height. Seems pretty stable so far. simple to operate. How I installed it: -Disconnect batteries (my van has 2, yours might just have 1) you'll need to disconnect the negative terminal(s) from their post(s). You can try to turn on the van and if nothing lights up you did it right. You should look up a tutorial on that if you don't know what youre doing. It is easy, but might be nerve-wrecking for someone who hasnt done it -Disconnect the airbag by unscrewing the single hex bolt (7mm i believe) under the seat in front. -Remove all 4 star shaped bolts, (40T). Your seat is free at this point. -Use the colour diagram in the seller description for which holes to use. should be obvious tho. -use the star bolts to put the swivel in and then use the bolts, nuts and washers to secure the seat onto the top. -Reconnect the airbag and battery. thread the black power supply cord thru the hole in the center of the swivel and make sure its got enough slack to turn. Do not turn the van on with the air bag disconnected bc you might cause an error. *If you have a bar in the back seat base you'll have to cut it off to turn the seat. Edit: I did manage to figure out what was stopping the track and it was the washers. I cut the bolts to make them shorter but they still ended up hitting the lower section of the swivel chair. I again installed the shorten bolts and only had to use one washer which the track could go over. so now it is fully functional, swivels and the track can move forward and back 100%. I did lower my review because all my struggles could have been avoided with instructions in the box. I'm a novice at this DIY stuff and can eventually figure things out but it was annoying. Instructions should be a given

Well what can I say about this unit, I guess it technically does its job of rotating but just barley, i got this for my passamher seat so my wife can spin around while I work, in order to do so its a workout, base is stiff to turn, i mean absolutely stiff and I already loosened the bolts for the swivel so they were barley snug. Fitment, they got that correct for my van 2016 ford transit wagon 150 xlt, the supplied bolts are to long so the seat only moves forward or back like 2in, seriously 2 in, thankfully my wife is short so I should be OK, will probably end up replacing this whole unit with a base that has bearings to swivel easier, would i buy again, simply no, will I pay over $100 for a swivel base that gives me full forward and backward movement and swivels easier 100% yes,

Yes, it fits a Promaster if you do 2 easy mods. No, no instructions and if you need them, you shouldn't be installing the swivel. Get help. Use the original bolts to fasten the swivel to base, adding in supplied washers. Cut the supplied bolts shorter (or buy new ones) Cut down the spacer behind the seatbelt attachment point and plastic cover. I installed this swivel in a 2019 Promaster in about an hour. Make sure to route wires to the center and wrap them to protect them.

took me about an hour. watched a couple youtube videos first. that helped a lot. had to use the original seat bolts to connect the swivel to the base, then had to use a bunch of washers on the bolts in the back connecting the seat to the swivel, or they would have been too long and hit the plate when it rotates. also had to use whatever holes lined up in the front when connecting the seat to the swivel. but it works! i am very happy with it.

Swivel came with no instructions and with marks and scratches as if it was tried to be installed once before. I don’t know yet if everything is in the box as it has no indication of what’s supposed to be in the box. I will look on YouTube to find some kind of instructions. If I manage to get it installed and working I will change my rating. So far it’s a two sta ***Updated Edit*** It took two people to install it. I had to keep looking on the item page on Amazon to see the photo of the picture of the holes with colors on them. It took about 1 and 1/2 hours with the right tools . the bolts need to be shorter to slide seat all the way forward as it stops at pilots. It still works the way that it is. I did have to loosen the tightness of the swivel action as it was froze stuck. I give it 4 stars for the hassle of no instructions and wrong length bolts.

Fits both sides, easy install, red handle very sturdy, mounts have a raised lip for Xtra clearance, has 2 lock positions swiveled, tried others this is best one

Watched a couple YouTube videos... Mounted the base with factory seat bolts ...then put seat back on swivel with nuts and washers provided. Sliding seat and turning it for easy access with wrenches was key to quick install. Love it and makes my van life roomy and comfy.

L’installation a été assez rapide dans l’ensemble. Au début la base tourne difficilement, mais avec du lubrifiant , on réussit à le faire tourner avec assez d’aisance. L’installation par une personne débrouillarde est recommandée.

Très mauvais achat ... impossible d installer dans mon Ford Transit

Facile a installer très satisfait

Oui je suis satisfais du produit il correspond à ce que j ai acheté merci