VIVO Premium Single 17 to 32 inch VESA Monitor and Touch Screen Desk Stand with Rotating Base, Freestanding Pneumatic Height Adjustable Arm, 12 inch Maximum Screen Height, Black, STAND-V001R

This simply is a quality monitor stand. Good design, heavy duty materials, with excellent fit and finish. It's more of an investment than the $20 - $30 range stands, but it's in a whole different class. IMO, well worth the additional cost. I'm using this with a 27" video conferencing monitor. Assembly was very straight forward. They recommend having assistance, but I was able to do it solo with no problem. All of the tools (2 allen wrenches) except a #2 phillips screwdriver were included. By adjusting the angle of the mounting bracket, you can slide the monitor mount into the top screw slots, tighten them, and then add the bottom screws. After reading the many comments about the weight adjustment screw's being way off, I cranked it way down (clockwise) MANY turns before trying to mount the monitor (until it felt about right). No further adjustment was necessary. This adjustment is pretty stiff, so be prepared to put a little effort into it. Note than the screen can be rotated (landscape to portrait), but you need to remove the screw locking it in place. Check the specs to be sure the height range will meet your needs, and if so, I believe you'll be very pleased with this.

This stand is the perfect accessory for holding an iPad, which can also double as a second screen for your desktop. It's a sturdy little gadget.

Claim is that the screen will rotate. Problem is that it only rotates a few degrees and not far enough for portrait mode — needs to rotate 90° for that. Since my Apple Studio Monitor supports both landscape and portrait modes, I need to return this — which is too bad. Otherwise, this is a great, sturdy, desktop-stand (no clamp needed) VESA mount with plenty of heft. You are highly unlikely to knock your monitor over accidentally. It's easy to assemble and has a wide range of adjustment for the weight of the monitor. If it could support both portrait and landscape mode, I would give it 6 out of 5 stars but you have to chose one mode or the other in advance, darn it.

Assembly was straightforward and the directions were adequate. I couldn't figure out how to adjust the arm up or down and have it stay there. I had to push down firmly on the arm with my whole hand to lower it, and it would just pop right back up again. Based on some reviews here, I thought maybe I had to get it in the desired position and then try "locking" it with the hex nut adjuster, but that didn't seem to be working either. I understood that it loosened in one direction and tightened in the other, but I had no initial notion of what the total range of turning should be in either direction. I very quickly came to the end of adjustment at the "tight" end, so I started "unwinding" it to the loose end and just kept going. And going. And it didn't really seem like it made any change to the behavior. Maybe I didn't have to push QUITE as hard to make it go down, but it still sprang right back up instantly. So I cranked it some more, and kept going. and going. and going. and going. No, really, this went on forever (in awkward little half-turns with the hex wrench). And finally! it had been loosened enough that I could get the desired behavior out of it - easily lowering or raising the arm, with it remaining in place on its own! The PROBLEM, apparently, was that my monitor, at about 5.86 pounds, is just way LIGHTER than what this stand can support, and the arm tension had been set very close to maximum upon arrival, and for such a lightweight monitor, I had to back the tension off waaay waay down the scale just to get that free articulation. If I'd been mounting a 25 pound monitor on here, it would have responded much sooner at higher settings, with that greater starting weight. I suppose the point of this is that I had actually worried for a moment that maybe they'd sent me a defective one, until I finally realized that it's actually just a lot more robust than I'd even expected! If your monitor is very light, you may need to loosen the tension considerably before the arm works as intended. The weight of the stand is good, and it comes with rubber feet under the base, no contact between desk and surface or screws. The rotation (swivel) of the arm (on the base) is easy and smooth. The articulation of the arm is ideal for the specific place this will be used. We're very pleased with the purchase.

This item will not change your life, but it will transform your work environment. I bought this for my XP-Pen Artist Pro 24 Drawing Display. I imagined moving my monitor all around all the time, but that's not really what this is for. It is sturdy and gives you more desk room.

Improvise una tabla de madera para poder usarla con mi tableta de 16 pulgadas.El peso es ideal, se mantiene fija y no se mueve, hasta ahlrita he dibujado en ella sin problemas. El precio es una ganga.

The stand is sturdy and simple to fix TV on. Its heavy base provides stability. Happy with it.

I recently purchased this monitor stand with a flexible arm, and it's been a total game-changer for my gaming experience! The flexibility of the arm allows me to position my monitor at the perfect angle and height for each game, giving me a more comfortable and immersive experience. Whether I'm playing pinball games, vertical shooters like Raiden or Aero Fighters, or 2D fighting games like Street Fighter or Mortal Kombat, this stand has been a revelation. It lets me play the game how it was designed to be played, with the perfect screen orientation and positioning. This has made playing these games feel like a blast from the past, but with the comfort and convenience of modern gaming. The stand is sturdy and well-built, with a flexible arm that's easy to adjust and can be moved around with ease, making it perfect for playing a variety of games that require different screen orientations. Overall, I'm extremely happy with this purchase and would highly recommend it to any gamer looking to enhance their experience with pinball, vertical shooters, 2D fighting games, or any other game that requires a flexible monitor setup. It's a must-have for anyone who loves retro gaming and wants to experience classic games the way they were meant to be played!

Very practical and very smart. Helped me a lot

Works really well with Huion Kamvas pro 19 4K but you'll need to unscrew the tension to the lowest position for this tablet and it's not easy thing to do. You'll only need to do it once so not a big problem. Also I've put some felt pads under the rubber legs so that I can easily move the base around the table. Push it back, put it upright and use it as second monitor or grab it to yourself, push tablet down and use it as drawing tablet. Weight and sturdiness is quite good. Minimum height is around 18 cm.