Milomdoi for Samsung Galaxy S23 Ultra Screen Protector [Not Glass] Accessories 3 Pack TPU Film with 3 Pack Tempered Glass Camera Lens Screen Protector for Samsung S23 Ultra case friendly

This screen protector went on perfectly first time! Just watch the installation video a few times and follow the steps. I had tried to install a glass screen protector on my S23 ultra but it was really problematic. The fingerprint reader wouldn't work, the touch sensitivity was pretty bad and after 30 mins the protector just fell off rhe phone. So I reverted to the flexible protector - granted, not as protective as a full tempered glass protector but it should protect against scratches and stuff (time will tell). Installation is straightforward as long as you follow the video and steps. It took me about 5 mins and then I pealed the final layer off the protector was perfectly on the phone. No air bubbles. The only way I could tell it was on the phone was by angling it in the light where I can see the cutout for the front facing camera. The feel of it is very good too. I bought the phone used but barely and there was a protector on there which felt a little sticky and rubbery. This one feels like it is just the glass off the screen. Very very smooth. Fingerprint read is totally perfect and it feels slick when I'm scrolling on the phone. Hopefully it will protect the phone - we will see. I didn't install the camera protectors because of my case (my phone won't fit the case with the protector on).

This is the best screen protector I ever purchased. I think it is important I write this review, because I have tried so many. I have tried screen protectors that caused bubbles. I tried Gorilla Glass that splintered and cut my fingers. I tried plastic, film, glass etc etc. Before you read on, please note I tested this for the Galaxy S23 Ultra and other phones may differ. Prior to Purchase I watched a chap on Amazon explaining all the different screen protectors and their advantages and disadvantages. Also, the choice of a protective case is important, because in my previous purchase the case lifted up the screen protector and I had to live with a rubbish solution for some time. So this review is the output of quite a bit of research and also testing it myself. 1) It is so easy to put on. Watch the video, because the precise manual included in the box is almost always harder to understand. 2) you have a plastic holder to lock it into place and only have to ensure good centralising of the camera hole. 3) 2 swipes in each direction and a bit of work on the edges, job done There were 4 protectors in my pack. Initially I managed to mess up the first one, so I put on the second one perfectly. It was good for 8 months. Then it became a little brittle and tore (as it dries out) and today I removed the old one, my phone glass still pristine, and put on the next one. Easy peasy. And so much more touch sensitive again than it was with the brittle old one. It is probably wise to change it every 4-6 months. If your phone touch sensitivity is not good enough after application you can increase it in the Settings menu. I bought it together with the Spigen Tough Armor Phone Case for the S23. The tough armour case has protected my phone when it fell down very well so far. What could be improved? I am not using the camera protectors as they do not fit with the Spigen Case, which in itself protects the camera lenses somewhat, but not to the extend the camera lenses do. So, the compulsory purchase of the 3 camera protectors seems a waste of money as well as a waste of landfill and should not be necessary. It would be good if there was a variety of camera lens protectors one also to fit with the Spigen case (or in fact the spigen case including it into their case). In fact, I am not sure why there is no perfect combination case yet?

I was extremely impressed with these protectors, the instructions and tools provided to fit them are absolutely brilliant and meant I was able to get a flawless application completely free of dust and perfectly straight and aligned. Its worth noting that the camera covers are not flush so any case that moulds around the lenses will make the camera covers useless The screen protector itself feels on the softer side (keys/change would likely scratch) but this doesn't bother me as I am meticulous about caring for my device. Will definitely buy again when I have used the 3 I have

I hate installing these things as I suck at small hand nimbleness activities but everything I needed was in the package, including the phone rest, guides, squeegee, and wipes! The video is pretty helpful as well as the written instructions. They have made the installation idiot and clumsy proof :) First try, no air bubbles, no miss alignment, no dust, perfect installment! The protector doesn't take away from the screen, still glorious samsung display, it's not even visible unless you look very closely to front facing camera side. fingerprint sensor works the same speed and didn't require any further adjustments. Using it with official samsung case and the protector doesn't go all the edges so no problem with slim cases either. I haven't used the camera protector bit because they won't align with my case but very happy for the screen protector. I wish I bought it before scratching the phone with sand :/ I have had Samsung s23 ultra and Iphone 13 in the same bag, some beach sand got in, deep scratches on Samsung and nothing on Iphone. I find that Samsung screen scratches too easily. Never had this problem with previous gorilla glass androids or iphones.

What can I say I bought this and worth the money bc if you get it from outside its just a stupid money they ask u just for little thing

TL:DR, This seems like a great piece of kit for the price, and I would buy again. A lot of thought has gone into the application of the protectors - I recommend you watch the video two or three times in the slides on the product page though, unless you have used similar kits before. Usually, when I buy screen protectors, the first attempt ends up in the bin. This time I've managed to apply the cover without any annoying bubbles, dust or finger prints trapped underneath (I can't have a single speck on the screen or it annoys me every single time I look at the phone!) The size is bang-on for my phone (S23 Ultra). It fits perfectly along with my Quad Lock case on my motorcycle, using camera lenses cover also. Will be interesting to see what happens if it gets a bit damp in a light rain, but my bikes windscreen is pretty good at defending the phone as long as im.not stood still for too long. Finger print sensor works perfectly so far. I occasionally get the "you need to cover your finger sensor properly" message even without the protector, because my fingers and thumbs skin sometimes gets a little damaged at work from paper, cardboard, tools and so on. There has been no change in how often this occurs, so the addition of the protector hasn't made any difference as near as i can tell, which is good. As with any screen or protector, it still gets smudges where you type, swipe or tap. It seems to wipe clean just as easily as any other protector ive ever used, or the standard glass itself so I have no complaints here. Time will tell how well my screens glass remains protected, how well it withstands simple scrapes and dings, and how long it can hold before beginning to peel off. For the price, even if it only lasts 4 months, thats a years worth of protection in one pack (comes with three protectors!). I'd happily buy these again in a year if that were the case, as I tend to swap them out when they start to get marked anyway. Buy and try

At first this was a great screen protector. Easy to apply, looks great once on, and feels great. Until you use it in your day to day life. I would constantly be taking it out of my pcoekt to find it slid about on my screen and moved up and to the left, leaving the bottom cm of the screen completely exposed, and the top bunched up against my case and obscuring the front camera. The adhesion seemed okay with it still stuck to the screen from the most part, but this meant the edges would gather dust from when it did move. I thought maybe I'd applied it wrong, so used another in the pack. Same problem, but I stuck with it and just pushed it back down every now and again to make it usable (which I did with protector #1 before giving up and taking it off completely to try again with protector #2) Until one day it had moved a good inch or so up off my screen, torn in a couple places, and there was absolutely no way to push this back down and fix it so I had to take it off and go without a screen protector for the day. Upon research (Reddit), this was potentially due to the oleophobic coating that samsung use changing and the official screen protector was recommended, as this has happened to others with lots of other screen protectors. This brand was actually a recommended one, but from my experience it still doesn't work. Side note that my dad used the third in this pack for his S23U and claims it hasn't moved but I've noticed it has, just to a much much lesser extent than mine so maybe it's the whole men's front pocket/women's smaller back pocket storage thing. The Samsung protector was actually much harder to get on nicely than this one but it looks perfect after applying, the final feel is better and we'll see how it gets on with the oleophobic coating! It should be better as it was recommended by lots on Reddit as a solution to this problem and Samsung obviously know themselves what coating formulation they use. My dad is still happy with his protector but it was a waste of money for me.

The Milomdoi TPU screen protector set is a great option if you prefer a film protector over tempered glass. The protectors are ultra-thin and maintain the original screen clarity and touch sensitivity, with full support for fingerprint unlock and the S Pen. Installation is straightforward thanks to the included alignment tools, and any small bubbles or marks tend to disappear within a day as the film settles onto the screen. The flexible TPU material provides good everyday scratch protection while keeping a smooth, natural screen feel. Pros: Thin and responsive; fingerprint sensor works reliably; easy installation kit included; good scratch protection. Cons: Being a film protector, it doesn’t offer as much drop protection as tempered glass. Overall, a reliable and good-value screen protector pack that keeps the Galaxy S23 Ultra protected while preserving the original screen feel.

I was a bit sceptical when I bought these screenprotectors, but I have to say they are easy to apply and stick to the screen without any bubbles perfectly. For this price and the fact there are three in the package makes this screenprotector a no brainer for those who want to protect their expensive phone.

Kalbiniz kırılır ama bu ürün KIRILMAZ. Ürün kaliteli ve kurulumu da çok basit alıcısına hayırlı olsun.

Wirklich, besser geht's nicht. Sehr widerstandsfähige Folie, die in meiner Tischlerwerkstatt schon einige Stürze klaglos überstanden hat. Auch die abfallenden Seitenrundungen halten bis zum Schluss und lösen sich nicht. Bei meiner Beanspruchung habe ich sie jetzt doch nach 7 Monaten wechseln müssen. Der "Touch" ist wie auf Originalglas, die "Montage" ist denkbar einfach und sehr passgenau, wenn man sich die Zeit und die Ruhe dafür nimmt. Die besten, die ich bisher hatte und bei denen ich bleiben werde. Ich hoffe, dass diese Firma ihre Wertigkeit auch bei anderen Handys beibehält. Das ist keine Werbung hier und auch kein Fake. Gute Produkte muss man auch mal loben und ich freue mich, einmal nicht meckern zu müssen... Gutes Gelingen an alle !!!

I came from a Spigen NeoFlex screen protector, which sucked to install and slipped across the screen until it tore after about 4 months. In comparison this screen protector was a breeze to install and I actually only have 1 tiny bubble, which although I suspect it won't go away, likely won't bother me since the rest of the screen is clear. The instructions actually include a written version and pictures, rather than just a video as with some others like the Spigen, which is a bit chicken and egg if you are applying the protector in the bathroom with steam and only have your phone to watch the video. Similarly the design where the film is applied in two halves makes it much easier to get it dust free. An added bonus was the camera protector, which actually seems quite nice and protects all the lenses. Finally, my favourite thing about this system is that all screen protection fits around my quadlock case. I was not expecting the camera protection to work, but the bezels are actually thin enough and the screen film seems almost tailored for this case.

Great product. Fairly easy to install, good instructions included. Great value for what you get. 3 sets of screen protectors and 3 sets of camera lense protectors. Both are quite long lasting so you get potentially years worth of protection out of a single purchase. Screen protectors work seemlessly with finger print scan so you dont have to worry about rescaning your finger or it not working after installation. Manufacturer even thought enough to make a little tab on the sticker on the outside packaging so its easy to open the box without a knife, scissors or tearing. Ive tried other producta and been very disappointed. They peel off quickly or dont work with thumbprint. I wont bother using any other product than this one as long as i have my device.