Guyker Noiseless Tremolo Springs (Set of 4) for ST Electric Guitar Bridge Instruments Accessories Replacement Part, Black

Works great. I have a Jackson Randy Rhoads 24 pro V guitar that had 3 springs for the Jackson floyd rose. Every time I’d bend a string the bridge would raise up which is common but not cool. Added 2 of these springs to assist the other 3 and tuning stability is perfect, no excess noise, and they fit great. They are smaller than the stock springs but that provides extra tension. Now when I bend up or down on strings it barely even comes up. 99% of an improvement. I would say these are definitely worth it.

First of all, this is still a great product. That said, there is no foam inside the coils so just because you paint them doesn't mean they're noiseless. What I did notice that I can't share is some sort of film they sprayed the springs with. It looks dry holding a spring but if you hold it with a light and bend the springs to stretch them, you'll see what looks like soap bubbles between the openings in the spring spacing. If you do get these, look for yourself. I don't know what they sprayed them with but they did. Anyways, the way I see it is if a spring doesn't have foam running through the middle of the spring, then they're not noise canceling. I put some Pick N Pull foam from a case I have inside my springs. I used some fishing line and tied the foam together and then ran it through the spring starting on the pointy side and then clipped the fishing line once the foam was in place. It works great and doesn't get stuck between the coils. I definitely recommend these springs. If you haven't already noticed, I also upgraded the claw to this brand. Paired together, I definitely noticed a tuning stability increase. I can't imagine a thin-stamped claw that come with these cheap guitars are the very best parts so yes, I do believe this is a real upgrade.

They seem like the should work well. It would have been nice to have the whole set of 5. After getting this set installed and the guitar set up, one of the cheap bridge saddle lockdown screws stripped out, so that's a bit of a letdown, but the springs are good.

Oooooo I like these, that weird spring sound and clanky feel is gone now, I’ll never use uncoated springs again!

TLDR: Overall, for fixing the problem at hand and for as cheap as these are, would definitely buy again! Good product. Easy installation, and after adjustment and retuning, I tested some dive bombs and upward pulls - they held up well. Springs didn't pull themselves out of the block and they stayed seated on the claw. I installed these on a Wilkinson WVS 50IIK trem, which is a floating two point blade style. Nice fit, and no more sympathetic notes while I'm playing. One thing I did notice is that the stiffness of the springs is a bit lower than my stock ones, (wire gauge thickness between the Guyker ones and my stock ones can be seen in my photo), which I'm guessing will be similar for other people. On a 6 screw style tremolo, it won't matter much, since it's slammed to the body and you can't accidentally push the bridge sharp. If you own a two point floating style, like mine, (or a Floyd, Gotoh, Fender modern style, etc.), make sure you have a light picking hand. The lighter gauge springs means it makes it easier to pull notes sharp while just playing/palm muting. Easy remedy would be to use all 4 springs to have more tension on the bridge. Nothing to worry about if you're comfortable changing your playstyle a bit.

They're functional, but all 4 springs have less tension than my 3 stock floyd rose springs. And these actually added noise, turning my guitar into a reverb tank instead of making it noiseless lol. I stuffed the springs with strips of old tshirt material and fixed the noise part. I may try the red set next or go with another brand

I bought some Ernie Ball Mammoth Slinky's which are a 12-62 set. That massive 62 has a lot of string tension, so my three stock silver springs couldn't hold the bridge down at all. I was initially going to replace all three springs, but that was way too much tension in the opposite direction. So, I ran a single red in the center flanked by two silvers on the outside. That made my 25.5" scale Jackson Floyd Rose perfectly balanced in C-Standard tuning. If you have a Jackson, be warned that those fools glued in the silver springs. I had to get pliers and a torch to get them out of the block. Be careful not to bend them around, or you might ruin the block with a broken off spring inside.

Exactly what I needed for my m1007b to stop the sympathetic noise tuned to G🤘🔥🔥🔥 Worth every penny

to replace worn out set ...claw maxed out

Springs fitted easily without any hassle. They seemed to have similar resistance to the pre fitted springs so that always helps with things. Would recommend this product.

Ressort plus résistants que les originaux, c'est ce que je recherchais pour mon floyd rose!

Solved the problem of spring sound when using the bridge vibrato arm

Tienen excelente tensión, aveces basta con 2 resortes, 0 ruidos y excelente calidad