Fanttik Air Pump Hose Adapter, Extension Hose for Schrader and Presta Valve

Works on presta valves quite well; just have to read the instructions and see that you need to flip a little insert to swap from schrader to presta valve function. While this is made to screw into compact Fanttik inflators, my primary reason for buying this was to connect to my DeWalt DCC020IB 20v inflator designed only for schrader valves. This adapter works great on the DeWalt inflator and saves me from having to install a presta to schrader valve adapter on the valve itself (and avoiding the risk of then unscrewing the valve core when I remove it) for each tire. Instead I just leave this connected to the inflator and I'm set when it's time to air up my bike tires before a ride. Removal is very easy with the Dewalt's connector style so it doesn't get in the way when it's time to do my car tires. Highly recommend this for value and ease of use - beats buying an expensive silca pump head. Also, if you DO have a compact Fanttik inflator for emergency use and have the room in your bag to carry this adapter with it, you'll appreciate this over the basic short hose/compact adapter it comes with. It's a lot easier to use at the expense of a bit more weight/size, though not much.

I bought this after receiving my new Fanttik air pump. I use the pump when touring on my motorcycle and it will eventually save me from a flat one day. The stock Fanttik hose valve connector is a straight in screw type mechanism that is a pain to use on tires mounted on large touring bikes (disk brakes, sprockets, saddlebags, etc). The 90 degree offset of the adaptor attaches easily to my Road King tire valves and connects to the tire valve securely. Although the clamp lever and assembly is made of plastic, I didn't detect any flimsiness while clamping and unclamping the clamp from the valve. The two caveats is that the Pesta valve configuration requires a little disassembly and reassembly of the clamp assembly to get the clamp to fit the smaller valve. One of the parts is a soft rubber sleeve that will bounce and land under something and will be invisible at night. Don't ask me how I know this! Anyhow, I recommend reconfiguring to the Pesta valve size be done in daylight or at least with a flashlight available. The second minor issue is that the clamping mechanism works backwards when attaching/reattaching to the tire valve and takes getting used to. Pros: It doubles the length of the Fanttik compressor hose The clamp seals tightly on the Shrader valve Cons: Configuring the clamp for a Pesta valve requires repositioning of small rubber parts in the clamp The clamping mechanism works backwards from a normal side mount clamp I would definitely recommend this hose adaptor for the Fanttik air pump.

Very helpful for using on motorcycle

Better than the hose that came standard with my Fantik X10 APEX, but it's also 5 inches shorter, which makes it inconvenient. I measured the length at 19 inches contrary to the listed measurement of 19.96 inches. The length should be 24 inches at least. Also, the part that attaches to the tire valve also feels a bit gimmicky and doesn't give me confidence. The attachment does not feel secure. It's brand new right now and works, but I am not sure how long it will last.

Easy to use and very convenient

Good Transaction, Thank You.

For me this was a must have to make the purchase of the Fanttik X9 Apex Air Compressor easy to use. The compressor came with a straight hose with a screw on fitting. Having the push on 90 degree makes the compressor so much easier/faster to use, and it will get to the rear wheel of my bagger as well. Perhaps it should be standard with the compressor, but it's not. At least it is available.

I bought this to replace the aging standard valve/hose of my Fanttik pump. At first I couldn't get it to work with either valve type. I realized both inner parts of the valve must be flipped for presta. Once flipped around, even my short valves are gripped tightly. I am using the old hose as an extension. Based on the original, I should get several years of usage from this hose. Mine started giving me problems only after letting someone use my pump at a group ride. My images show the assembly order for presta.

Fits my pump and makes it work way better - the connector that comes OEM is junk. This one is excellent - Highly recommend

Va perfectamente

Producto llego antes de lo estipulado lo que es muy conveniente. Buena calidad y funcionamiento. Es mas practico sin la extension. El cordon original es mu util y eficiente pero es muy corto y es necesario adquirir la extension. El estuche es fuerte y un excelente complemento. 10/10 Recomendado

Really good, better than the other one

ottimo sotto tutti i punti di vista, consiglio vivamente