Tub Paint 16 oz Tub and Tile Refinishing Kit with Tools Semi-Gloss White

This is the longest lasting and toughest bathtub paint I have ever used. Im a commercial painter by trade and have tried 4 different products including the one you pour on to get that smooth bath tub look. Well they all peeled or yellowed and didn't come out like I thought they would. This one leaves what we call a very tight stipple on the surface when dry but I actually prefer because if you think about it, who wants a surface that youre stepping on to be so smooth you slip on it when it's wet. You might also think its easier to clean the smoother it is but the other products dont clean half as well as this one. In fact I dont think anything sticks to the surface. I hardly do anything to it and it stays looking so clean...like not even ring of scum or sticky build up that I had a hard time getting off of other products. I cant explain it...it just stays clean. I got the light grey and its been almost two years since I painted it and it looks the same as when I first painted it. I put like 4 coats on in the time alloted. I guess it won't even stick to itself once it cures so get as many coats on as you can but putting on thin coats and allowing it to dry quickly instead of trying to make it cover in one or 2 coats...be patient and make sure you let it cure for however long it says and not get it wet. So keep it warmish in the bathroom so it dries quick and you can recoat. I've dropped things in it which I thought for sure would chip it but didn't unlike other products. I love that the color I picked matched nicely with the tile I chose and I got the wall color to match as well Im still just in awe at how well it has held up when everything else seemed to fail and it wasn't even close to smelling as bad as the others. It barely had an odor at all...but that could just be me because I've been in the trade so long. Im looking at it now and the stipple gives it a slight matte finish which I prefer. I recommend stripping whatever you applied previously if anything and give your tub a good sanding with 60 or 80 grit orbital...clean and repeat before applying. I might try using it on some tile in my foyer because I hate the color but like the tile look and dont want to go throught the hassle of removing it and for the price is absolutely fantastic

After 10 years of coloring my hair and rinsing it out in the shower, my once-white shower pan had seen better days! No matter how many times I bleached it, it eventually became dull, stained, and gray. So, I decided to give it a makeover using DWIL Tub & Tile Paint in black—and I absolutely LOVE how it turned out! 🖤 The paint was so easy to apply, and I ended up doing 3 coats, although honestly, 2 coats probably would have been enough. So far, I’m really impressed with this product! It was an easy and affordable way to give my shower a whole new look without replacing the shower pan. ✨ So far, so good—I’m loving it! 🖤

This stuff works. Prepping is key. And omg... You have to do an TON of coats to get the desired look. I used 4 kits to do one small shower. With all that being said... it did turn out really nice. Just be ready to do 10 times more work than you thought and be patient. Every coat looked a little better but i could still see areas that looked faded or lines from the roller. So finally it looks really good. I will definitely update when i find out how durable it it. Update: Its been almost a year. There are two small spots about the size of a bottle cap that have peeled off. Im assuming I didnt get it clean enough in those two areas because everything else is holding well. A little touch up and its perfect again.

I had been putting up with the hideous “greige” tiles, sink, and fiberglass shower enclosure ever since we bought our house. After loads of research, I decided to try DWIL tub and tile paint. I don’t have a fan in my bathroom, and everything I read about all the alternatives out there (including the one that gets the most hype: rustolem’s tub refinishing paint) were epoxy based, and you had to have major respirator masks to use safely. When I found DWIL, I thought it might be too good to be true, so I decided to try it on the sink first and see how it went, and then decide if I’d do the tile, the floor, and the shower enclosure. Well, not only did it work, but it was almost easy. I mean, sure, I had to take time to tape everything off, and clean things well, but … that stuff is amazing. It took more coats than I expected to not see a little of the greige showing through, but the paint dried so quickly, I was able to go over areas with show-through within an hour of doing a coat. And if I dribbled paint on the floor (which I did a couple times), a wet rag would bring that up easily if it was still wet, or it would scrape off with a scrape razor. No problem.) The sink came out so well, I did the walls and floor and the shower enclosure. My entire bathroom looks completely different. I wound up redoing the ancient 80s wall tiles in the other full and half bath in the house. The shower enclosure took a lot longer, and a lot more coats were needed (I think I did 5), but again, it’s fast applying and drying, so it wasn’t that bad. I recommend buying better rollers - the ones that come in the kit aren’t great, but the paint brush that comes with it is fine. The hardening liquid that comes in the kit isn’t in a great container; I immediately transferred it to a small glass jar and would put the paint into a plastic paint jug so I could do smaller sections instead of prepping the whole can at once. (It’s possible to use the paint you’ve pre-prepped hours after without it hardening: just cover it tightly - the paint brush and roller too - with plastic wrap.) After the DWIL had fully cured, I painted the shower and sink with two coats of polycrylic to give it a bit more shine, but it’s not necessary. The walls and floor didn’t get the polycrylic addition, and they look fabulous too. We’re not planning to sell our house any time soon, but I know the investment of time and energy I made in refreshing our bathrooms with the help of DWIL paint will pay off big-time. They look modern and clean, instead of dull, old, and greige. A (relatively) easy and definitely affordable DIY project that anyone can do.

Packaging: came with a roller, brush, plastic gloves (which were very helpful), tape, tape with plastic attached (very useful), paint, and two hardening solution packs. I still needed to get extra rollers, a few paint trays, painters tape, paint stirers, liquid sander and scrubbing pad. Application: Went on easily. My first coat was a thin layer. I used the brush on the grout lines and then applied the roller. The difference was very visible. I think sticking with the roller for the first two coats would have worked better for a more even application (I also think a sprayer would have done the job perfectly) . Not sure if it was the grout or the curve of the tub that caused the roller to split, but you will need a few extra rollers just in case. Drying: I was working in a relative warm bathroom (my upper level is difficult to cool) so that may have impacted things. But boy, this product wants to dry! I sometimes accidentally touched a spot I had previously completed and the coating was dry enough that i didn't disrupt anything. It's best to work thoroughly in small methodical sections. I also ran into an issue with the paint in the tray forming skin layers. I wasn't aware of the formation until I applied more paint to the roller and then to the tub. It may be helpful to keep the tray covered with plastic to hopefully avoid this. Because of this, I used a new paint tray every time I finished a layer. It's difficult to clean them out completely and I didn't want old paint flecks/ skin causing issues with the next layer. Unfortunately there are still flecks that I couldn't get out. I don't feel terribly picky about it. Manage any drips immediately though. Coating: for my shower/tub project, one container made 2 full coatings. I ordered two containers because I wasn't sure what to expect. Glad I did. I actually liked the two coatings and hubs thought it was good enough. But I did see a bit of unevenness in my application in places. I used the second container to liberally apply a thicker third coat. That was exactly what it needed. A few paint brush touch ups at that point blended nicely and the product self- leveled. I absolutely love the result. We were going to go through an expensive rehab in the bathroom. This product changed our minds. The tub looks brand new and we saved ourselves several thousand dollars. I will say that our tub is porcelain with ceramic tile. The matte finish combined with the roller texture makes it look like a pvc cover up installation lol. Still looks amazing though. Tons better than the grimy mess it once was.

Pros: absolutely white Cons: paint wears off pretty quick During the paint: The roller included does its job, the brush included kind of makes it look wood-like texture so just make sure you use the brush for the corners only! I think the paint dried in about 2 hours, although the instructions said to wait 48 hours, which we did before turned on the shower. After the paint dried: It dried nicely, but be careful when you decide to place a home depot bucket in the tub and it accidentally scrapes your bottom. Also, it absorbs stains easily. I'm going to have to redo the paint. Overall: I spent almost over $110 on buying two of these, it might be my paint skill, but I have to redo the paint or just do an entire renovation. I'm not super happy with the outcome. I was being a little cheap.

Product was amazing! Couldn't believe absolutely zero and I mean zero odor. This dries great and while I needed a few coats (3) it was worth every penny take your time tape things off oh and don't rely on the tape they give you in the kit it's terrible. Use gloves like disposable ones and really take your time I use an exacto knife to cut in around items as needed - painted towel holder and toilet paper holder all in black. The walls took three coats of white paint. (I used several kits of black, white and grey which is more like a beige/grey but very nice color) The floor is the gray paint with some stickers for floors ..this stuff is durable! The accent tile all around the room is faux/ peel and stick and I had to readjust it at least four or five times just two days after the paint had dried and guess what no issues the paint stayed on solid and there was no problem with me reapplying and readjusting the stickers . Everything in the photo came from Amazon (except the wallpaper) . Complete bathroom renovation for under $1,000! And best part no contractors, no mess ,no dust-PERFECT! Will be using again for my other 3 bathrooms - won't be doing tubs or showers in those- just walls and floor tile but based on how well this held up I may try a tub. Be sure to use a simple green degreaser and make sure tile is dry after you do . Pay attention you have to use within 12 hours of mixing. Also I know others mention cutting in for grout lines but I had no issue and just used the roller they provided. Good luck this stuff is a miracle in a jar (pricey but worth it). UPDATE! 2024 ok I can't scrub the walls with any kind of cleaner and still rick solid!

I needed to re-do the tile floor of a walk-in shower at a rental that I manage. I had had the floor and the whole surround "shot" by a commercial vendor a few years ago -- the surround still looks OK, but the floor was ruined -- cracking and chipping. I wasn't sure which color I should order, as the tile surround looked sort of a dingy white, and I was afraid that a pure white product might stand out too much. I couldn't find any pictures of the Vanilla White product, so I ordered that first, and FYI -- it was WAY too yellow for me -- nothing "white" about it. I ended up ordering a second kit of the regular white paint, and painted over the yellow, and the DWIL people were kind enough the refund half of my purchase price on the original order. Now, that said, I've been looking for a product exactly like this -- low VOC, easy to apply, and something that is self-levelling and hardens into a durable finish. I won't know for quite a while how durable it is (a year?), but for now, it looks good and seems really solid. If it holds up, this is a great product. Can it withstand somebody standing on a shower mat? We'll find out.

I used a paint sprayer for a more even texture, then did a wet sand 1500 grit after the 7 day curing process to polish it up a bit and it’s holding great. Will update my review later if I run in to any problems. I did 3 coats with 2 hours inbetween. It looks great but keep in mind it will not have the same glassy feel like a brand new tub, but it’s certainly a nice face lift from what it was before. Make sure to wait the full 7 days before sanding, and DWIL doesn’t necessarily endorse sanding, I just asked a friend who understands these kinds of paint products.

Cannot believe my bathroom transformation! Yes, it took a lot of time and patience. But worth it. A few things to note: 1) Loved how these came as kits with everything you need. No need to buy extra things, it all comes together. However, I wish I could just purchase the paint and not all the accessories, as I ended up buying multiple kits and didn't have the need for all accessories 2) I bought a total of 3 kits to paint all my tiles and the bathtub (2 kits for tile, 1 for bath). Definitely purchase more than you think as you'll need quite a few coats 3) be careful with the colour "white" and "vanilla white". I hadn't realized how yellow-looking my bath was until I painted the tiles with "white". I did not plan on it, but ended up having to paint the tub to match. If your tub pulls a little on the yellow side, definitely get the "vanilla white" 4) I mixed some black paint with the white separately to make grey and did some veining on the tiles. I can't speak to durability as I have yet to use the bathtub, but I think I will put a protective sealant over the tiles so that it can't chip. The paint feels very sturdy and hard though. Overall, I definitely recommend.

We had 1960s blue and cream tiles in our main bathroom. We were DIYing our bathroom so we had a tight budget. Replacing the walls with new drywall was a messy, time consuming task we wanted to avoid, so it was worth trying to paint the tiles since they were in good shape. It took 3 coats but it looks great! I bought grout pen for it too but I don’t recommend it! My only concern was that the roller given with the kit should have rounded edges so it doesn’t leave lines when applying. The product is thinner than my usual latex paint so it had to be applied slower than usual to avoid splatter. Overall I am pleased with the results.

I was very disappointed with this paint. It scratches far too easily, even after it had plenty of time to cure. The finish is not durable and doesn't hold up to normal use. I expected a much tougher coating, but it marks and scratches with very little contact. I would not recommend this product if you need a long-lasting, durable finish.

I have never refinished a tub and this made it super easy to do. I only mixed-up half to start and that did one coat (it has to dry so long before adding a second coat). I was a little worried after the first coat as it was very streaky and did not fully cover. Trust the process! It needed 2 coats (which the product says) and the second covered so well! I did the tub surround. Such a good price, prevented me from having to change the tub surround as it was very yellow before. The white is nice and bright. Product was easy to use and came with all the tools you need.