Sealey Peh2001 Industrial Ptc Fan Heater 2000W/230V

This product will heat a single room and really should be put on a timer so you don't overheat and waste money. Robust, easily maneuvered and effective at heating the surrounding air. The downside of using this for heating is it will heat the air, it does not give lasting heat like you get from radiators and the piping under the floor. The heat can dissipate very quickly and it it's currently expensive to run. The upside is using it responsibly will save a few precious bucks, by running it at intervals and heating only the room you need. Very good product, no issues and have used it repeatedly over winter.

Raises the temperature in the garage sufficiently for the tumble drier to work satisfactorily.

A nice little heater, compact and throws a good bit of heat for 3KW. The biggest disappointment for me was that despite looking in the pictures like it would tilt up and down, it doesn't. This needs to go on a high shelf in a workshop so needed to point down. There is what I presume is a safety device to stop that. The natural angle is slightly up so a ground location would be fine. However; I did find a workaround and that was to remove it from the stand and simply reverse the heater. Then it tilts down and up as I wanted.

Not convinced this is the safest heater. Wasn't used much when i bought it last May but I started to be used when it got colder last year in October Since then its blown 2 fuses, thrown the trip switch on the circuit it's on several times, scorched a couple of plug points and now the final straw is it melted the plug it was supplied with. It appears this CANNOT be left on for any length of time on a standard 13AMP socket. You should be able to run a 3kw heater on a 13amp fuse. Its the top of the range but it should work. The manufacturer says "Yes this product requires a 16A plug to run, it draws to much power to be run on a 13A supply. This is stated on the web for this product." I can't find this stated in the product description above.

Be careful of your electric bill

Best fan heater I have ever had. Extremely powerful. Makes a nice sound like white noise. Don't listen to that fool in the other review "No Plug oh the humanity" it's an industrial fan heater designed to be wired to various different types of electrical outlets. Very well made and the ceramic heating element is top notch "like seriously". Make sure you get a quality heavy duty plug for it and wire it properly. This is a very powerful machine and draws +- 12Amp which means that a cheap nasty plug would be a potentially dangerous mistake.

Bought this to help dry out wall in ensuite after tiles behind old shower were removed and it's doing the job. It's a sturdy little heater with good heat and angle adjustments and intend to use it at workbench area of garage in cold weather when its done its job in the ensuite

Good for direct heat or small areas, but struggles to push heat around larger spaces. I bought this at the tail end of last winter and used it twice for approximately 2-3 hours in total. Recently switched it on for a 3rd time and the fan failed after a few seconds. Sealey do have a reasonably good service network, but the nearest outlet is some distance away and the retailer has made clear that postage costs are my responsibility. If you want a cheap heater this may be ideal, but next time I'll try to buy a more reliable item.