VEVOR Welding Cart, 3-Tier Welder Cart Heavy Duty 400 LBS Weight Capacity

Arrived well packaged and undamaged. Very pleased with this cart. Easy to assemble sturdy metal gave me a nice cart to hold my welder and all accessories. The only comment I have that could improve this cart is to have some type of drawer hold when the drawers are closed. If the cart is at a slight angle and the cart is bumped the drawer slides open. I do have a lot of weight in the draw though. The finish is also nicely done.

Works well for Lincoln Square Wave 205. I actually didn't install the big U shaped handle. Plenty of shelf space, and it holds a big bottle. Easy to roll around my shop. No complaints.

This cart features two drawers, one with fixed dividers for small items, a larger drawer for larger loose items, and a "lockable" space for items like a helmet and clothing. The large rear wheels and decently-sized front casters that swivel 360⁰ allow the cart to maneuver around the shop floor and not get stuck on small bits that might be in the way. The top shelf easily holds a 200+ amp welder and a second shelf below it provides quickly accessed storage for commonly used tools, electrodes. Four sturdy hooks offer plenty of easy access for multiprocess welder guns and torches. While the large storage compartment is lockable, it uses external hinges that are held in place with small bolts that can be removed with a screwdriver, and the hinges are plastic. I wouldn't use it to securely store something without replacing the hinges and perhaps the keylock; it's fine, otherwise. 4 stars because of this. The cart ships well-packaged and arrived undamaged. There were no build issues assembling it, the instructions are clear, and the fit and finish had no issues. Assembly took under two hours, including unpacking and not rushing through the process. Vevor included extra bolts, washers, and nuts which was reassuring. Would recommend for DIY and light duty shops on a budget. This cart should easily last a generation. Well done, Vevor!

Impressed with the quality and ease of putting it together.....

I don't know why the reviews are so high for this, it's OK, it's FINE.. it's good-enough. The quality is not great, the metal is thinner than I expected, the hardware (bolts/nuts) are terrible, they sheer/strip so easily. The paint is not great, laid very heavily in some areas, thinner in others, and at least on came the paint was damaged in a lot of places but that's just transit probably.

A decent cart for a good price. Turned out that it is more like 9.5" wide for your welder between the screws. So to fit my large welder I flipped the top shelf upside down, cut off the front lip with the label and drilled 4 holes in that top panel to mount my welder(required removing it's orange cover for mounting but the same bolts from the cart fit perfectly through the holes in the welder's feet). I also cut off the left brace so that my welder side panel could open and mounted that tool hook a little lower, see photo. I use the handle on the welder to push it around but kept the original cart handle mounted a little lower for a handle when sitting and as a bumper to protect the welder control panel. Quite happy with the results but may still move the front casters further apart for better stability. Also would prefer wider drawers for more storage space and closing their backside to keep the mice out. May still add a drainage hole to bottom and middle shelves in case they get wet, and shelf liners under and around the tank to keep it quieter.

Fits nicely on my little hobby rig. Price fits the quality. I wouldn’t necessarily suggest this to a pro, but it works for my needs. Just fyi, the instructions have a mistake; the top shelf shows the wrong hole. My picture shows a bestarc 145 and plasma cutter.

I liked the amount of enclosed storage on this welding cart, so I took a chance even though it didn’t have reviews yet. The cart itself is a bit more solid than I expected it to be, and the amount of storage is GREAT! If this held a second tank, it would have been perfect for what I was looking for (without breaking the bank). It’s a flat-pack as most things are these days, and took me a while to assemble. There are a few negative things to note. 1-The wheels & casters are probably the lowest quality items of this cart. Will they support the advertised 350lbs? I don’t know, maybe. 2-The bolts are all Phillips heads. Tightening a nut of a Phillips bolt is not the most fun. Hex bolts would have been better imo. 3-If you want the top shelf to slant like the stock photos show, the front bolt holes don’t line up. If you aren’t prepared to drill your own hole, you’ll have to mount the top shelf level. 4-The build order is not the most well thought out. The worst is, they have you add the lower tank bracket at the end after the cabinet is basically fully assembled. I have long arms, so I could still reach around, but that lower tank bracket (not upper) could go on as step 1 and save effort. 5-Not a big negative, but there are no janky tools for you to use while for assembly, so you’ll need a #2 Phillips (& #3 is helpful if you have one), & 10mm socket or wrench (& 7mm for door hinge hardware but is not 100% necessary). The instructions also don’t tell you what tools you’ll need. I’m assuming if you are buying a welding cart, you will at least have basic tools ;) For under 140 bucks, I’m satisfied and I’d buy it over again. If the price climbs too much higher though, I’d probably look elsewhere.

Stadig och bra svetsvagn. Lite otydlig bruksanvisning men inga problem att sätta ihop den.

A good cart would recommend it

Tellement satisfaisant que j’en ai acheté 2!!!

BE VERY CAREFULL TO FOLLOW PICTURE ASSEMBLY INSTRUCTIONS OR YOU WILL HAVE TO TAKE SOME THINGS APART TO CORRECTLY ASSEMBLE.

Top