BRCOVAN Anti-Theft Motorcycle Phone Mount Holder with Vibration Dampener | with Secure Lock, Adjustable Size Handlebar Cellphone Cradle for Bike Bicycle Scooter ATV, Fit 5.4 - 7.2'' Smartphones

Quad lock has competition with this mount! As far as secure fit and anti vibration this is just as good and just as easy to remove and secure your phone. I have a Lifan KPM 200 I got off Amazon here. It vibrates pretty good when at max throttle. Just as a motorcycle normally does. The phone screen stays completely readable and usable. It simply doesn’t move! I’d recommend this and buy it as a Christmas present for friends and family who ride. It’s that good. Save your money by buying this phone mount that’s $50 to $75 cheaper than quad lock motorcycle mount and does the exact same thing.

I wanted the aluminum phone holder, but this one filled all the gaps and doubts, super sturdy polyamide and glass fiber structure feels high quality plastic, very resistant, feels a bit heavy too (not a dealbreaker since the components are durable stainless steel bars), phone is very secure, after you insert it you turn a back round knob and the spring/latch is not opening, I liked that comes with a mirror adapter if you dont use those holes or adapt it on the bottom of the mirror screw. Depending on the phone I liked that this one, the camera is usable since its aperture allows it to (unlike the Lamicall brand), so works as a dash cam as well. Overall happy with the results (this arrived fast). I used it with a Galaxy Note 10 plus with a transparent cover and it still has space for more (a Galaxy S25 ultra with an otterbox chunky cover also fits so you get the idea) you just have to open the side holders with a phillips screw driver and secure them at the end to the desired fit. Ease of installation and comes with a manual as well. I used the 24.5mm rubber band it comes with 4 with different measures, I used it in a Honda CB300f Twister 2025, wanted to upload 2 videos but amazon only allows 1 per review. Highly recommend it.

I'm blown away by the quality of this product and the value. It is made of alloy overmolded with a grippy rubber like material on all areas that will contact a phone. The springs on the main clamp hold the phone VERY securely, and it has a lot of adjustable range. In addition, the side pins are adjustable for different width phones. They are fastened by screws so that you set them once, and you're done. On my Pixel 10 Pro, one of the pins does cover the down volume button. While adjustable for width, you cannot adjust them along the long edge of a phone. As stated in the instructions, you are meant to leave a small gap between the pins and the long edges of the phone. I used a business card as a shim, and set them that way. These pins are an additional piece of security as the main clamp is strong enough to hold the phone securely all alone. The bracket comes with multiple round shims for a variety of mounting bracket and handlebar sizes, and it also includes a mirror post mount. The clamp balls are coated in a soft, sticky material that allows the main clamp to grip very securely. I am confident that with these accessories that most any mounting situation can be accommodated. Once mounted, this thing isn't going anywhere. A rubber interface between the clamp and holder body does a decent job of absorbing high and medium frequency vibrations. As described, key fasteners are Torx anti-tamper screws. The kit comes with the necessary tools. For me; these will live in one of the small zip loc bags that come with it, and they'll be hidden in a pocket in my tank bag. All in all this is a great piece of equipment. It will be holding my phone for navigation on an upcoming trip around the Italian and Swiss Alps.

I love it. It works great on my chopper. It is very sturdy and it fits my phone great. It clamps it in place very good and it stays in place. I recommend getting one.

**Near the bottom of this review is a PRO INSTALLATION TIP** FIRST, the "unimportant stuff" - I have purchased 6 or 7 phone holders from different brands for my motorbike. Only one of them was good enough to be used on my bike for over 3 years. I'm changing my OEM mirrors on my motorbike to bar end mirrors. The last phone holder was installed with an L bracket directly under the mirror bolt. Although this phone holder is sold by BRCOVAN, The actual brand name is KEWIG. NOW, the important stuff" - "THE GOOD" - The packaging is very good. Everything is separated and doesn't come in one big bag like the inferior brands. As soon as I picked up the main body of the phone holder, it did feel pretty heavy, and very durable. Although it is made of plastic, like pretty much everything today, the plastic is a lot harder, a lot more dense than any other brand I've tried in the past. The handlebar installation was pretty simple and quick. All of the rubber inserts have raised edges that help align the handlebar insert with the bracket. Something I have never seen before. The insert and bracket themselves once installed do not move at all. The instructions are pretty clear. Not only do you get photo instructions, but you also get worded instructions. You will need a Phillips head screwdriver to adjust the side and lower grips on the main body of the phone holder. The grips themselves are made of rubber / silicone and are nice and soft. We will see how everything holds up in Florida weather. I only own a motorcycle, so I ride it every single day. Rain or shine. Installing the main body of the phone holder to the double socket arm was very difficult. Inserting one of the balls into the double socket arm was pretty easy. But once you have one ball inserted, the screw inside the twist lock on the double socket arm acts like a fulcrum. So the opposite end of the socket arm will close up a little bit. So don't waste your time trying to shove both balls into the double socket arm, until you read below. **PRO INSTALLATION TIP** There is an "anti-theft screw" on the double socket arm. Take this screw out completely. Then you can actually unscrew the twist lock a little more. Allowing both balls to be inserted into that double socket arm very easily. I have a Galaxy S24 Ultra with an OtterBox Commuter series phone case. The phone with the case is pretty thick, but it does fit very nicely with a little extra space all around. And the telescopic rods on top do hold the phone very securely. They do feel well-built. Also, there is a high speed secure twist lock on the top back of the phone holder near the telescoping rods. But honestly, I don't think you will ever use it. That's how secure my phone feels when inserted. The face of the KEWIG phone holder also has soft rubber / silicone panels. And they do feel really really nice. "THE BAD". Once you get the phone holder completely installed, inserting or retrieving your phone IS NOT a "quick one-handed access" as the product information states. If you do not hold the double socket arm when inserting or retrieving your phone, the positioning of the phone holder WILL MOVE. Even if it is just a little bit. But that really is a small thing to me, seeing how well made this phone holder is. Because most phones today do have two columns of camera lenses on the back of the phone, 1 telescopic rod will cover the innermost lenses on your phone. But for me, that really is not a big deal. Now for the vibration dampening. It is only marginally better. That's all I can say. But I don't really use my phone's video camera when I'm riding. So again, no big deal for me. All in all, I wished Amazon would allow us to give 1/2 stars, so I could give the KEWIG phone holder 4.5 stars. But since they don't, I will have to settle on 4 stars. If KEWIG could do a redesign of the double socket arm so it doesn't move and actually allow for a "quick one-handed access" and allow no blockage of some of the rear camera lenses on today's phones... This phone holder would no doubt be 5 stars from me.

I'm impressed. It won't fit super thick phone cases as mine is a galaxy s26+ with a case that fits 5 cards and is about as thick as I'd want to get. It sits nice and high, easy to put on and it'll stay on at 90+mph. Takes 2 hands to get off but that's what you want. You can rotate for landscape as well.

I am giving this 5 stars due to its versatility, value, solid construction, and good ergonomics. I used this mount on my 2015 Harley street glide S and an iPhone 15 pro. I loosened my brake lever/mastercylinder bracket to aid in adding the clamp for the mount, removed and replaced one zip tie for control cluster wiring on handlebar. I added purple loctite to all the small screws on the posts you adjust to fit your model phone. The mount works well even at highway speeds and wind, the vibration pads do their job and in the 5 hours I rode with this mount, can’t recall an instance whether idling or cruising that the phone screen wasn’t clearly visible. I feature and price compared many of the more expensive brands and models. There are quite a few much more expensive mounts that are very well built and much sleeker and lighter than this mount, and they do an awesome if not better job as well. But for the 30$ price I had to try this first, and I am glad I did. This mount far exceeds my expectations and is very solid, almost vibration free with a solid grip on my phone, plus a quick lock screw feature, and a security key set screw to help prevent theft. I highly recommend this mount.

I bought this BRCOVAN Phone Mount for my 2010 Harley-Davidson Street Glide, and it is an exceptional piece of gear. It is incredibly easy to use and provides a flawless fit for my massive iPhone 17 Pro Max, clipping it in securely with zero hassle.The phone hold is unmatched. Its rugged grip locks the device into place, and the specialized vibration dampener brings maximum steadiness to your screen, protecting your phone's camera stabilizers from heavy V-twin rumble. I have logged 75 miles with it so far, and the high-speed lock keeps everything completely immovable on the highway. I will keep you updated as I roll on more miles, but this is a solid 5-star investment! The only negative which I wouldn’t minus a star for is I wish it add a little bit more range of motion.

Die Smartphone-Halterung macht einen sehr hochwertigen, robusten und soliden Eindruck. Sie ist relativ schwer, da sie hauptsächlich aus Metall (eloxiertes Aluminium) gefertigt ist. Sie hat an allen Kontaktstellen Gummieinsätze, so dass die Smartphones gegen Kratzer geschützt sind, nicht herum rutschen können und gut gehalten werden. Sie ist größer als man im ersten Moment denken würde, was jedoch nicht überrascht, da sie auch für große Smartphones gedacht ist. Sie nimmt mein Samsung S24 Ultra auch mit Schutzhülle problemlos auf und hält es zuverlässig. Ich habe sie am Motorradlenker montiert, wo sie hervorragend passt und auch die Sicht auf das Dashboard nicht stört. Für Fahrräder geht sie sicher auch, aber dafür erscheint sie mir doch etwas zu wuchtig. Die Vibrationsdämpfer sind hervorragend, so dass es keine Probleme mit Vibrationen oder Erschütterungen geben sollte. Die seitlichen Begrenzungsstifte kann man mit Schrauben an die Breite des Smartphones anpassen, sie lassen sich jedoch auch ganz entfernen, wenn sie stören. Ich denke zwar, dass die oberen und unteren Klammern (die einen Gummiüberzug haben) das Smartphone auch so sicher halten, wollte es jedoch nicht darauf an kommen lassen, da ich sie im Querformat nutze. Daher habe ich die seitlichen Begrenzungsstifte dran gelassen. Die Feder des oberen Haltebügels ist ziemlich fest, so dass man einen gewissen Kraftaufwand braucht, um das Smartphone einzusetzen und heraus zu holen. Dafür wird das Smartphone entsprechend gut gehalten. Man kann den Haltebügel auch noch mit einem Drehknopf auf der Rückseite fixieren, so dass er fest ist und nicht mehr bewegt werden kann. Dadurch kann auch niemand im vorbeigehen (z.B. an der Ampel) das Smartphone einfach herausnehmen und damit abhauen. Das schützt natürlich nicht vor Dieben, wenn man es unbeaufsichtigt (z.B. beim Tanken) stehen lässt. In solchen Fällen würde ich das Smartphone immer mitnehmen. Die Halterung lässt sich aufgrund des doppelten Kugelgelenks und des Verbindungsstücks sowohl senkrecht als auch waagerecht nutzen und in einem gewissen Rahmen nach oben, unten, vorne und hinten einstellen und drehen. Man hat damit einen recht ordentlichen Spielraum für die gewünschte Position. Die Schrauben zum fixieren der Manschette und des Verbindungsstücks sind Torx mit innenliegendem Stift. Sie bieten damit einen gewissen Schutz gegen Mitnahme der Halterung, da das kein so übliches Format ist (Werkzeug ist im Lieferumfang enthalten). Natürlich bietet das jeodoch keine absolute Sicherheit. Ich bin mit der Funktionalität und Qualität sehr zufrieden und kann die Halterung für Motorräder empfehlen.

Diminui em mais de 90% a vibração, permitindo até uma filmagem por ele. Super recomendo.

Recommend.

Using this product with Galaxy Fold 5, and it is great, the phone is secured while folded, and also made of a very good material and quality I recommend it for others

Esta perfecto Muy buen material tomando en cuenta que es nuevo Solo hay que ver si aguanta el sol y la lluvia por qué los colchonsitos que tiene para amortiguar son muy delgados pero por lo pronto está todo perfecto