SHPN-9

Nice IP66 Waterproof DIN Rail Case / Panel! This Mollom 5 Way HA Series panel appears to be well-built out of a plastic or resin-like substance, they call "PC+ABS alloy material". It has a DIN Rail and two small buss bar type terminal strips (all included) - One for Neutral and the other for Ground. The buss bars are held in a little blue plastic holder that snaps into place in the back of the unit. In the unit that I received, these buss bars were not fully seated (see photo), but I removed the blue plastic piece, and carefully bent it in the middle (toward me), and this let the bus bars fall into place. There are no guides for where you place your holes for your conduit or cable connectors, so use your best judgement and drill your holes accordingly. This unit arrived with three water-tight connectors (for PVC pipes or metal conduit, I presume), which I did not use. This unit comes in two shells that seat together nicely to seal out dust, insects, and rain water. The base shell attaches to the wall and the top shell attaches onto the base shell with four machine screws (included). The top shell has a clear plastic window, which allows you to view the status of your devices. The window is secured by green spring-loaded clips that are moved inward to release the plastic catches at the top and bottom edge. You can even place a small padlock, or an electrical seal on the cover window, to help prevent unauthorized individuals from casual entry. I used this box to secure a high power temperature control switch and circuit breaker to operate an attic exhaust fan. I am more than happy how the project turned out. This Circuit Breaker Box feels solid, and it looks good. I saw these products used in Europe, and was happy to install this one in America. I did not see any rating, such as UL, CSA, or CE on this unit. Maybe I missed it. If this rating is a requirement by your local electrical inspector or fire inspector, you might want to investigate this product's ability to be legally used in your location.

I recently purchased the 8 way circuit breaker protection box, and it’s been great for organizing all the breakers in my solar backup system. The box is made from a solid PC+ABS alloy material that feels durable and looks professional. Installation was straightforward. The DIN rail and neutral/ground buss bars come pre-installed, though I had to adjust the buss bars slightly to fit perfectly. There are no pre-drilled holes for conduit, so you’ll need to drill your own. The top shell has a clear window, allowing quick monitoring of breaker status without opening the box, and it even supports a small padlock for security. It’s compact yet offers enough space for wiring if planned properly. The design is neat and professional, making my solar backup setup look organized. Highly recommended for anyone setting up a solar or off-grid backup system.

very good , thank you

Just what I needed to make a mini sub panel for outdoor heaters.

Meets the specs and look sturdy.

Excellent box. I was able to fit two items. Easy to install, the transparent door is adorable.

Ease install pleasing to the eye when installed. Good price.

For DIN rail-mount breakers there's a problem with "how" when it comes to small enclosures. This solves that problem quite nicely. I like the top and bottom holes and included rubbery glands for both, (in two sizes) so you can feed cables in with moderate environmental protection. You can also fit a compression gland if you intend to install outdoors (e.g. rain) protection that will stand up to abuse, but the provided rubbery ones are fine for inside. There is sufficient space on the side of the breakers and box for *some* cable routing back through the bottom for the top end of the breakers, but be aware that this depends on the gauge of the wiring you are using. For heavier gauges it is not going to fit thus you'll have to feed from the top AND bottom, but for 14ga (for example) it does. Tolerances are good, the "smoked" plastic front door is nice to prevent accidental actuation and the provided rail in side fits properly. Four places pre-indicated on the inside make for an easy install; they're not penetrated through so drill the one(s) you want and the cover screws are separate and provide a good seal with the pre-installed gasket. Recommended.

Excellent solid product. Fitted in garden building so can’t comment as to watertightness, but perfect for the job required. Roomy enough for wiring, comes with two loose 32mm glands but I fitted 20mm ones using holesaw. Earth blocks x2 are fitted and fascia blanks supplied. Various screws/plugs/rubber washers supplied for fitting. Door hinged on left and lockable catch on right. Supplied promptly and sturdily packaged. Great value, would buy again.

Der Verteiler ist ein richtig gutes Teil. Ich habe ihn mit 5 Steckdosen, einem Multimessgerät und einem Hauptschalter bestückt die allesamt auf die Hutschiene geklickt werden. Diese hat einwandfrei gepasst sodass die Sachen auch perfekt darauf halten. Das einzige was mir nicht so gefallen hat - es sind nur zwei doppelreihige Anschlussterminals für Null und Erde dabei. Für die Phase würde ich noch ein Terminal brauchen, und ein passendes konnte ich auch mit ewiger Suche nicht finden. So habe ich mir eines gekauft und werde das wohl irgendwie dort einkleben müssen da es nicht in die vorhandene Halterung passt. Was solls - ansonsten bin ich mit dem Ding sehr zufrieden.

Correspond à la description, possibilité de mettre un cadenas

Good product even better than the picture shows . Especially like the extra knobs.

Corresponden al diseño,fieles a las fotos buena calidad